Académique Documents
Professionnel Documents
Culture Documents
[Release version]
Model and Program ROM
Spec Old Ver. New Ver. Support models
name mark
[File configuration]
PP-FNS-20180620-EN.zip:
PP-FNS-20180620-EN +--- B +--- A0H20Y0_00B1_G00_9000.BIN (SD-506 control program)
+--- A0H20Y0_00B1_G00_9000.sum
+--- A65U0Y0_00B1_G00_4100.BIN (SD-513 control program)
+--- A65U0Y0_00B1_G00_4100.sum
+--- G +--- A0N90Y0_00G1_G00_7000.BIN (GP-501 control program)
+--- A0N90Y0_00G1_G00_7000.sum
+--- H +--- A0H00Y0_00H1_G00_D000.BIN (FD-503 control program)
+--- A0H00Y0_00H1_G00_D000.sum
+--- J +--- A15X0Y0_00J1_G00_B000.BIN (PB-503 control program)
+--- A15X0Y0_00J1_G00_B000.sum
+--- K +--- A4F40Y0_00K1_G00_4000.BIN (SD-510 control program)
+--- A4F40Y0_00K1_G00_4000.sum
+--- M +--- M1 +--- A4F60Y0_00M1_F00_2414.BIN (GP-502 control program)
1
Program Release Information (PRI)
2. Where changed
2.1. Newly added function/Change of specifications
[RU-518]
2.1.1. Change is made so that thin coated paper (-135g/m2) can be humidified. (Change of specifications)
In single-side humidification mode, the line speed after acceleration is 800 mm/s or less.
Note 1
It is necessary to apply new RU-518 FW and countermeasure applied main body FW at the same
time.
AccurioPress C6100 series: Ver4.0 or later versions
AccurioPress C3080 series: Ver3.0 or later versions
AccurioPress 613 series: Ver2.0 or later versions
Note 2
The following configuration / conditions remain out of specification.
After update the latest RU-518 FW and latest main body FW, manually switch DIPSW (94-7 = 0/1)
to make paper feed impossible.
* AccurioPress 6136 series + PIPFU
* AccurioPress 6136 series + 3rdParty option
* When using the aqua conditioner.
2
Program Release Information (PRI)
Note 3
With simplex printing, there are modes that not achieve 100% productivity.
(Reference)
AccurioPress C6100 series
Mode Decurl / Decurl reverse Straight reverse Straight
Size [mm] 215.9 488 215.9 488 215.9 488
Old FW Impossible to feed paper
New FW 99% 99% 61% 58% 98% 99%
AccurioPress C3080 series
Mode Decurl / Decurl reverse Straight reverse Straight
Size [mm] 215.9 488 215.9 488 215.9 488
Old FW Impossible to feed paper
New FW 100% 100% 80% 79% 100% 100%
AccurioPress 6136 series
Mode Decurl / Decurl reverse Straight reverse Straight
Size [mm] 215.9 488 215.9 488 215.9 488
Old FW Impossible to feed paper
New FW 89% 94% 60% 55% 86% 92%
215.9mm: 8.5Inch.
488mm: Maximum paper feed size on RU-518.
2.1.2. When using the aqua conditioner, water droplets are generated and the paper is affected.
Correction of pump operation timing. Added idle rotation control when switching humidification ON
and OFF.
Target JOB: When using aqua conditioner to set humidification.
[RU-510]
2.2.1. Bug when connecting two RU-510.
Configuration: GBC PUNCH G2 / GBC WIRE BINDER
[RU-518]
2.2.2. Humidification warm-up is not done.
Configuration: RU-518+HM-103
2.2.4. Color sensor analysis results not notify to the main body. And SC not detected.
Target JOB: When RU - 518 density adjustment JOB.
3. Restrictions
None
5. How to install
5.1. How to update the firmware
You can install firmware to machine by USB-ISW.
Please refer to the Service Manual for the detailed procedure of the firmware installation.
Please change the file configuration according to the main body
3
Program Release Information (PRI)
A8FR0Y0-00Q1-G00-30
IQ-501 IQ control program Q
A8FR0Y0-00Q2-G00-12
* Company names and product names in this document are the registered trademarks for respective
companies.
(C)2018 KONICA MINOLTA, INC.