Académique Documents
Professionnel Documents
Culture Documents
INCH
mobile cranes
ship cranes
harbour cranes
crawler cranes
offshore cranes
PRODUCT INFORMATION
Crane Blocks & Swivels
page INDEX
2/3 GENERAL INFORMATION
4 CRANE BLOCKS
5 SPECIAL BLOCKS
15 OVERHAUL BALL
18 / 19 APPLICATION
20 CONTACT
Ropeblock your partner for
standard and custom designed
craneblocks and swivels.
Ropeblock
Ropeblock BV is a Dutch producer of crane blocks and swivels. Beside blocks we
produce a variety of sockets for the offshore hoisting industry.
We are located in Oldenzaal in the Netherlands, which is in the centre of Europe
and can be easily reached by road or air.
General
We produce crane blocks with reeve guides on all models.
- All hooks according to DIN in forged alloy steel.
- Checkpoints deformation indication on all hooks.
- Duplex hook available in all sizes.
- Sheaves are furnished with double sealed roller bearings for high
speed services, long life durability.
- Sheaves fully protected by side plates.
- Dual action hooks (swinging hooksuspention supports a swiveling hook)
- Beckets suitable for Ropeblock wedge sockets (see page 16)
- All thrust bearings are protected against dirt and humidity.
- Ropeblock designs crane blocks with a safety factor ratio 4 to 1.
- Design of all crane blocks in accordance with load group 1 Bm - DIN 15400.
OPTIONS - All sheaves ductile-iron GGG 50.
- Flat bottom side plates for self standing during reeving-process.
- Steel sheaves
- All our single/triple sheaveblocks have a centre becket between the side plates.
- Nylon sheaves - All five sheaves crane blocks have a dead end connection intergrated in the
- Bronze bearing side plates.
- The thrust bearing and the traverse journals are lubricated through a pressure
- Duplex hook
grease fitting.
- Additional weights - Every crane block comes with cheek weights for stable lifting.
- Super safety latch - Short and compact design for maximum lifting height.
- The groove of the sheaves are machined to a smooth surface for better load
distribution properties. This to prolong the cycle time of your wire rope.
Each block can be deliverd with drawing, part list, proof load certificate and a
hook material certificate.
Ratio rope - sheave is minimal 1:20.
Sheave size from 250 to 630 mm for wire rope from 11 to 32 mm.
Specials on request.
See also our warning and application instructions.
Quality
The quality assurance program of Ropeblock is ISO 9001 certified.
2
Testing
All our crane blocks and swivels are proof loaded in accordance with the
Ropeblock BV test program. With our 300 tons tensile testing equipment,
certified by TNO and approved by all major classification societies, we can offer
additional proof load testing facilities.
Finish
Our standard crane blocks are delivered painted with one layer primer, one layer
finish and yellow warning stripes.
Stock
We carry a huge variety of standard range crane blocks in stock.
RopeBlock BV
P.O. Box 391
7570 AJ Oldenzaal
The Netherlands
e-mail: info@ropeblock.nl
URL: www.ropeblock.nl
3
Crane Blocks
OVERHAUL BALL STANDARD REEVE BLOCK FAST REEVE BLOCK OVERHEAD BLOCK
range 2 - 80 ton. range 8 - 160 ton. range 8 - 160 ton. range 1 - 500 ton.
Body in forged steel with becket on High tensile side plates. Compact and Fast reeving without removing your socket Short pattern block.
top for easy fitting of an open multi purpose design. Swinging hook from the wire rope. Side plates with Available with point and
wedge socket or shackle. Hook in suspension for swiveling hook. integrated handgrips for positioning and duplex hook.
forged alloy steel with safety latch Optional: - Separate lube channel stabilizing before catching load. High tensile
and first class thrust bearing to each bearing side plates. Compact and multi purpose
including greasefitting. - Polyamid sheaves design. Swinging hook suspension for
Optional: - Submersible application - Custom becket swiveling hook.
- Polyurethane fender - Single or Duplex hook
- Marine application Optional: - Separate lube channel
to each bearing
- Polyamid sheaves
- Custom becket
- Single or Duplex hook
4
Special Blocks
5
Standard Reeve Block
1 - sheave
6
Standard Reeve Block
3 - sheaves
7
Standard Reeve Block
5 - sheaves
8
Ropeblock warning
and application instruction
WARNING
Where equipment has swiveling and moving parts there are potential safety
hazards. Care should be taken when working with or repairing such equipment.
If used incorrectly breakage could occur inflicting injury or death.
Repair and reeving should be carried out by trained personnel only. Power
should be switched off before operations are carried out. Work should only take
place when equipment is seated on a firm surface.
Limitation of use
Every 500 operating hours or every 4 years, hook and hooknut are to be
dismantled, inspected and retested (proof loaded).
9
Ropeblock warning
and application instruction
1. Wear in hook, centre pin, becket and threads in hook and nut.
2. Play in sheave bushes or bearings.
3. Spacer bolts, nuts and lynch pins.
4. Check for cracks in welds.
5.Condition of safety latch and grease nipples.
6. Wear to holes in side plates and becket.
If cracks or heavy gouges appear, the equipment should not be used and
qualified opinion should be sought. If grooved and the section reduced by more
than 5% the item should be replaced.
Repairs should be done by grinding. NO welding should be carried out unless
prior authority is obtained from Ropeblock B.V.
If the holes in crosshead, sideplates, becket, eyes or yaws are enlarged by more
ORDER INFORMATION than 5%, the part should be replaced. Any parts to be replaced should be
purchased from Ropeblock B.V., or manufactured under their instruction.
- Ropediameter
- Weight All repairs to be carried out by responsible personnel and great care should be
- Number of sheaves taken in the re-assembly of the equipment and captivating parts i.e., grub
screws, lynch pins, etc. Check and refit only correct sizes and threads.
- SWL (safe working load)
10
Fast Reeve Blocks
Use Ropeblock utility crane block for effortless reeving. The simple design of the Fast REEVE block enables you to reeve
without removing the socket from the wire rope.
Manufactured to ISO 9001 certification, can be adapted to suit customer requirements available ex-stock.
123
Step no. 1
After placing the block on a flat
surface open reeve guides.
Step no. 2
Fold down reeve guide to reeve
without removing wedge and socket.
Step no. 3
Replace and close reeve guides.
Proceed with your lift.
11
Fast Reeve Block
1 - sheave
12
Fast Reeve Block
3 - sheaves
13
Fast Reeve Block
5 - sheaves
5 - sheaves
14
Overhaul Ball
15
Beckets & Open Wedge Sockets
Becket øD T S R H
mm mm mm mm mm
1 27 22 40 30 70
2 32 28 50 35 85
3 37 35 55 45 100
4 43 40 65 50 115
5 52 45 75 60 135
6 59 50 90 70 160
7 65 60 100 75 175
16
Crane Block components
and accesoires
Our huge stock in crane block components and accesoires
makes us an interesting partner for short deliveries.
- Hooks
- Hook suspensions
- Shackles
- Connecting links
- Swivel hooks
- Bearings
- Cast sheaves
- Nylon sheaves
- Steel sheaves
17
Application
18
19
PRODUCT INFORMATION
DAY-TO-DAY DELIVERY
ALL OVER THE WORLD
A huge stock in hookblock -
components, and sockets makes
us an interesting partner.
RopeBlock BV
P.O.Box 391
7570 AJ Oldenzaal
The Netherlands
Tel: +31 (0)541-532300
Fax: +31 (0)541-536575
E-mail: info@ropeblock.nl
Homepage: www.ropeblock.nl
inaccurate or incomplete or becomes so as a result of further developments. Ropeblock BV. 1e revisie february 2007