Académique Documents
Professionnel Documents
Culture Documents
08/28/12
Revised:03/31/2016 Letter Report No: 100651474DAL-001
Project No. G100651474
Subject: Compliance Report for “NEMA Type 4X Enclosure” evaluation of Power Box, Control Box and Power
Factor Box.
This letter represents the results of the evaluation of the above referenced equipments to the requirements
contained in the following standards:
• Standard for Safety Enclosures for Electrical Equipment Non-Environmental Considerations, UL 50,
Issued:2007/09/04 Ed:12 /CSA C22.2 No. 94.1-07 First Edition
• Standard for Safety Enclosures for Electrical Equipment, Environmental Considerations, UL 50E,
Issued:2007/09/04 Ed:1/ CSA C22.2 No. 94.2-07 First Edition
This investigation was authorized by Petra R&D; application Q500359203 dated 02/10/2012. Production sample,
Model Power Box, ID No. DAL1208151040-001, was received on 08/15/2012 and 03/24/2016. The Power Box
sample and the design of the Control box, and Power factor box were evaluated 08/23/2012 to 08/28/2012 at the
Intertek, Dallas facility.
As per the evaluation conducted all three enclosures meets the requirement of “NEMA Type 4X Enclosures”. Only
the Power Box enclosure was evaluated, however construction of the Power Box enclosure represents the
Control Box and Power Factor Box.
MODEL SIMILARITY:
Page 1 of 3
This report is for the exclusive use of Intertek’s Client and is provided pursuant to the agreement between Intertek and its Client. Intertek’s responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use
of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only the sample tested. This
report by itself does not imply that the material, product or service is or has ever been under an Intertek certification program.
1) Power Box:
1700mmHX1160mmWX370mm,
2) Control box:
700mmHX760mmWX370mmD.
Photos:
Page 2 of 3
If there are any questions regarding the results contained in this report, or any of the other services offered by
Intertek, please do not hesitate to contact the undersigned. Please note, this Letter Report does not represent
authorization for the use of any Intertek certification marks.
Signature: Signature
Revised by: Ramzi Amawi Reviewed by: Sudesh Kamble
Title: Director of Operations Title: Sr. Staff Engineer
Signature: Signature
Page 3 of 3