Académique Documents
Professionnel Documents
Culture Documents
AristoMig
AristoTig
AristoArc
From the initial design stages, our goal
was to produce an intelligent and flexible,
modular-based welding system. A system
that provides you as user with the
possibility of combining modules to build a
system that will certainly meet your needs
– irrespective of whether you use the MIG/
MAG, DC-TIG or MMA process.
Many powerful
The Communicator Alutech™
– Powerful control – the chassis
of tomorrow
The control panels are symbols that describe the The Alutech™ aluminium
available in three series functions, a background- chassis has many
that meet the needs and illuminated graphic advantages. It is made of
demands of different display and buttons with a corrosion-proof, strong
types of processes. You distinct shape. and resistant material that
choose between series 2, Series 6 has text menus increases the length of
4 and 6. that describe the life of the equipment. It
The panels are desig- functions in your own can manage tough
ned so that you can use language, a background- environments and
them without needing to illuminated graphic conditions, and is easy to
remove your gloves. The display and buttons with keep clean.
silicon-coated surface is distinct shape. The new Aristo has a
sealed, durable, dirt- You can see below modern and compact
repellant and easy to which panel is to be design, and is equipped
keep clean. chosen for each respec- with modern practical
Series 2 is equipped tive welding method: solutions.
with easily set knobs and A couple of visible
change-over switch. Method Control Panel examples of improved
MMA A2 A4
Series 4 has clear ergonomics are the
TIG T4 T6
MIG/MAG M2 MA4 MA6
handles and the slanted
system. You yourself select the functions and
customise your welding equipment based on
your working environment, and the demands
that are to be met in the specific operational
activity. When the needs change, you can
complete and adapt the equipment to the
requirements of the new area of use.
arguments
CAN-bus
– connection Developed
to your future to perform
front. There are two large CAN-bus is a digital advantages are that the • Modular based
and ergonomically communications and system facilitates service flexible system
facilitate lifting with an outside a piece of equip- technology – and to take • Ergonomic design
overhead or other crane. ment can com-
• CAN-bus – digital
municate with control and
each other. communications
The system is system
• Safety shut-down
at voltage drop
The system consists of the
AristoMig 400 power source and
either the AristoFeed 30 or the
AristoFeed 48 feeding mechanism.
You can choose between the M2,
MA4 and MA6 control panels. MA4
has MIG/MMA and the MA6 has
MIG/MMA as well as MIG pulsing.
AristoMig – MIG/MAG
The system can be completed
with a water-cooling unit and a
multiple voltage unit. You choose
yourself and build the unit that
corresponds to your needs and
demands.
AristoMig 400
Power source with max
400 ampere
Sturdy Alutech™
Energy save mode function
AristoFeed Built-in dust filter.
M2
MIG/MAG
Voltage
Wire feed speed
Inductance, 4-steps
Burnback time
2/4 stroke
MA4
MIG/MAG
Voltage
Wire feed speed
Burnback time
2/4 stroke
+
MMA: Arc force, Hotstart
Inductance, stepless
Gas pre/post flow
Crater-filling
Creepstart
Display/measurement V/A
MA6
MIG/MAG
MMA: Arc force, Hotstart
Voltage
Wire feed speed
Inductance, stepless
Burnback time
2/4 stroke
Gas pre/post flow
Crater filling
Creepstart
Display/measurement V/A
+
Synergy MIG/MAG
Synergy Pulse MIG/MAG
MMA: Electrode type
10 memory positions
Hot start MIG
Gas purge
Wire inching
Multi language
The fundamental part of the DC-TIG
system, which also contains MMA
functions, is the AristoTig 400 power
AristoTig – DC-TIG
source. You can choose
between the T4 and the T6
control panels. Both have TIG/
MMA. T6 has TIG DC pulsing,
advanced MMA and a memory
feature. The system can be
completed with a water-cooling
unit and a multiple voltage unit.
You choose yourself and build
the unit that corresponds to your
needs and demands.
Water-cooling Unit
Connected to the power
source’s energy save mode
Automatic start function with
safety cut-off, that starts the
water cooling with welding.
T4 T6
TIG/MMA TIG/MMA
MMA: Arc force, Hotstart MMA: Arc force, Hotstart
Gas pre/post flow Gas pre/post flow
Slope up/down Slope up/down
HF/Lift Arc HF/Lift Arc
2/4 stroke 2/4 stroke
Display/Measurement V/A Display/Measurement V/A
+
MMA: Electrode type
Gas purge
10-memory program
Pulsing DC
AristoArc MMA is a compact and sturdy piece
of equipment. The fundamental part is the
AristoArc 400 power source. You can choose
between the A2 and the A4 control panels. The
A4 enables you to choose type of electrode for
optimal welding qualities. The panel also has a
AristoArc – MMA
display that indicates current/voltage. You choose
yourself and build a unit that corresponds to
your needs and demands.
AristoArc 400
Power source with
max 400 ampere
Sturdy Alutech™ chassis
Energy save mode function
Built-in dust filter
Trolley
A strong and neat trolley
makes it easy to move the
equipment around.
Control
Panels
A2
Current
Arc force
A4
Current
Arc force
+
Hotstart
Display Measurement V/A
Electrode type
ESAB supplies a wide range of torches,
guns and electrode holders. Our products
are made to fulfill high demands for both
features and welding quality. Ensure that
Complete your
equipment
you produce excellent welding quality
and have effective output by
completing your new Aristo system
with torches, guns and electrode
holders from ESAB.
ESAB AB
Åkeson&Partner Örebro
Box 8004
S-402 77 Göteborg
SWEDEN
Phone: +46 31 50 90 00
Fax: +46 31 50 94 36
www.esab.net
XA00099320