Vous êtes sur la page 1sur 2

11/04/2019

ELECTRICAL BILL OF MATERIALS 08:48:53


PROJECT :Jetty 1&2 capstan PJ Rev 0

UNIT of
FWBS BM ITEM SPECIFICATION Measure Quantity UNIT Price Sub Total
US$
1380 GENERAL
1 Scaffolding
1.1 Scaffolding supply Supply of Scaffolding lot 1
1.2 Scaffolding works Erection and dismantling of scaffolding lot 1
1.3 Scaffolding works Mobilixation/transfortation of scaffolding lot 1

1381 SUBSTATION
1 L/V MCC Single Front (MCC-JETTY1-301) 3PH, 3W, 60Hz, 480V, 100A, 15kA, 1sec. set 1
incomer and outgoing cable is bottom entry, Grounding is TNS,
Location is outdoor near to sea installation, with anti condensation heater
Type of Mounting is free standing, with framework and with gland plate
Refer to Sing line diagram for details
2 L/V MCC Single Front (MCC-JETTY2-301) 3PH, 3W, 60Hz, 480V, 100A, 15kA, 1sec. set 1
incomer and outgoing cable is bottom entry, Grounding is TNS,
Location is outdoor near to sea installation, with anti condensation heater
Type of Mounting is free standing, with framework and with gland plate
Refer to Sing line diagram for details

1382 POWER
1 Local Equipment
1.1 Local Control Station With start pushbutton, emergency stop, selector switch for forward and reverse motor pcs 10
direction and with Ammeter and indication light, suitable to Zone2, IIA, IIB, T3,IP55
2 Cable
2.1 LV Cable, 0.6/1 kV 3c+E 95sq.mm XLPE/SWA/PVC m 600
2.2 LV Cable, 0.6/1 kV 3c+E 120sq.mm XLPE/SWA/PVC m 740
2.3 LV Cable, 0.6/1 kV 3c-4sq.mm XLPE/SWA/PVC m 840
2.4 LV Cable, 0.6/1 kV 3c-6sq.mm XLPE/SWA/PVC m 1015
2.5 LV Cable, 0.6/1 kV Control cable 12c-2.5sq.mm XLPE/SWA/PVC m 1855

3 Termination and Splicing Material


3.1 Termination Materials such as lugs, ferulling etc. LV Cable pcs 44

4 Cable Gland
4.1 Cable Gland and accessories Brass with Nickel plated, CMP or equivalent,E1FW,50S, thread 1-1/2" pcs 2
4.2 Cable Gland and accessories Brass with Nickel plated, CMP or equivalent,E1FW,32, thread 1" pcs 10
4.3 Cable Gland and accessories Brass with Nickel plated, CMP or equivalent,E1FW,20, thread 1/2" pcs 10

5 Cable Tray
5.1 Perforated cable tray, return flanged type (100x75) m 71
5.2 Perforated cable tray, return flanged type (200x75) m 125
5.3 Cable Tray Accessories Elbow, Clamp, Bolt/Nut, etc. lot 1

6 CONDUIT
6.1 Rigid Steel Conduit HDG Rigid Steel Conduit 3/4" m 10
6.2 Conduit Accessories lot 1
6.3 PVC Conduit 2- 1/2" conduit to be concealed in the Mooring Dolphine m 12

7 OTHER WORK
7.1 Cable Tagging stainless steel with cable tie stainless steel (Tagging at both ends of cable and at every 30mts along the cable run) lot 1
7.2 Misc. Material such as for power work lot 1
7.3 Steel Material for power work lot 1
7.4 Touch up painting Surface area to be painted lot 1
7.5 Excavation m3 183.04
7.6 Sand filling m3 176
7.7 backfilling m3 105.6
7.8 Cable protection tile concrete tiles m2 211.2
7.9 Warning Tape Yellow color "Caution Low Voltage Cable Below" m2 228.8

SHEET 1 OF 2
11/04/2019
ELECTRICAL BILL OF MATERIALS 08:48:53
PROJECT :Jetty 1&2 capstan PJ Rev 0

UNIT of
FWBS BM ITEM SPECIFICATION Measure Quantity UNIT Price Sub Total
US$

1382 LIGHTING
1 LIGHTING FIXTURE
1.1 Lighting Fixture at mooring dolphine 100W,230V, stand type, suitable to Zone2, IIA, IIB, T3, IP55 pcs 10
1.2 Flourescent fixture at MCC shelter 2x36W with battery back up, industrial type, IP55 pcs 4
1.3 Lighting Photocell Outdoor industrial type pcs 2

2 RECEPTACLE OUTLET
2.1 16A, 2C+E, Industrial outlet pcs 2

3 CABLING, WIRING & TERMINATION


3.1 LV Cable, 0.6/1 kV PVC/SWA/PVC 2C+E- 4 m 910
LV Cable, 0.6/1 kV PVC/SWA/PVC 3C+E- 4 for lighting with battery back up m 25

4 Cable Gland Gland size 20, thread 1/2" pcs 28


4.1 Termination Materials such as lugs, ferulling etc. LV Cables pcs 28
4.2 Cable Gland Accessories lot 1

5 Conduit
5.1 Rigid Steel Conduit in MCC shelter Galva.Steel 3/4" m 6
5.2 Lighting Junction box with DIN termminal block suitable to Zone2, IIA, IIB, T3, IP55 pcs 10
5.3 Misc. Materials for lighting work lot 1
5.4 Steel Material for lighting work lot 1
5.5 Touch up painting Surface area to be painted lot 1

1383 GROUNDING
1 GROUNDING WIRE
1.1 Grounding Wire PVC Wire 35 sqmm m 200
1.2 Grounding Wire PVC Wire 70 sqmm m 742
1.3 Ground Bus 6x50mm Cu Strip w/tin Coating, with 8 ways earth connection pcs 2
1.4 Grounding Electrode 19mm dia. 1500L, Cu-Clad Electrode pcs 2
Grounding pit excavation m3 3
2 TERMINATION
2.1 Termination Materials such as lugs, ferulling etc. for grounding work points 50
2.2 Jointing of Conductors Wire-to-Wire - Crimping points 35
2.3 Misc. Materials for grounding work lot 1
2.4 Steel Material for grounding work lot 1
2.5 Touch up painting Surface area to be painted lot 1

SHEET 2 OF 2

Vous aimerez peut-être aussi