Académique Documents
Professionnel Documents
Culture Documents
MEDICIONES.
Montes Pérez Diego Andrés
Olivero santos Dania Andrea
Polo Begambre Emeri.
Resumen
Se tomaron medidas teniendo en cuenta varias propiedades de la física como el tiempo, el cual fue calculado con un
cronómetro. La longitud en la cual se utilizó una cinta métrica, y se midió el largo y el ancho de la mesa de trabajo.
Con un pie de rey se calculó la profundidad de un cilindro de aluminio, y el diámetro de un balín. Y al final utilizamos
una báscula y una balanza para medir el peso de tres monedas diferentes.
ABSTRACT
Measures were taken taking into account various properties of physics such as time, which was calculated with a stop-
watch. The length in which a tape measure was used, and the length and width of the work table was measured. The
depth of an aluminum cylinder and the diameter of a pellet were calculated with a king's foot. And at the end we use a
scale and a scale to measure the weight of three different coins.
Keywords: Measurements, diameter, weight.
Reemplazando tenemos:
Moneda de aluminio
∆V=2π(12.75mm)(8.70 mm)0.05+π(12.75mm)2 0.05(8.70mm)
∆𝑉 = (257.00 ± 0.05)𝑚𝑚
Moneda de $500
∆V=2π(11.85mm)(2.20 mm)0.05+π(11.85mm)2 0.05(2.20mm)
∆𝑉 = (56.71 ± 0.05)𝑚𝑚
Moneda de 1000
∆V=2π(13.35mm)(3.80 mm)0.05+π(13.35mm)2 0.05(3.80mm)
∆𝑉 = (122.31 ± 0.05)𝑚𝑚
Mediciones por: D. Montes, D. Olivero, E. Polo