Académique Documents
Professionnel Documents
Culture Documents
And it all starts with the PRO Series. A full lineup of professional machines
that continue to earn the trust of serious landscapers. Day in. Day out.
The PRO Series is built for business. Allowing you to start each day
with a sense of possibility. And greet each sunset with a sense of
accomplishment. As you’re about to see, the PRO Series has been solely
created to meet and exceed any challenges you face.
cubcadet.ca/pro
PRO Z™ SERIES
zero-turn mowers
pg. 6–23
PRO HW™ SERIES
hydro walk mowers
pg. 24–29
Table of contents
Unlock your possibilities with a quality professional
lineup that lets you take on long seasons of demanding
work with confidence.
Series
cubcadet.ca/pro
Believe in higher power. Superior cut quality at high speeds. Exclusive steering options for hillside domination.
Industry-leading steel thicknesses. Maintenance-free spindle assemblies. All backed
by limited commercial warranties with no hour limits. This is the PRO Z Series.
Designed to set you apart from the competition. More productivity with less downtime.
And durability that lasts year after year.
6 7
PRO Z 500/700/900 OVERVIEW
The PRO Z™ Series lineup
An escalation of power.
PRO Z 500 ™
PRO Z 700 ™
PRO Z 900 ™
Horsepower: Up to 35 HP**
Transmission: 16cc
cubcadet.ca/pro
Max speed: Up to 14 mph
Seat: Isolation-dampening system
with air-ride seat
isolation-dampening mounts
2
on front axle
15" run-flat front tires (lap bar)
16" turf front tires (steering wheel)
6" rear tires
2
triping roller included
S
Deck sizes: 60" and 72"
Horsepower: Up to 35 HP**
Transmission: 16cc pumps and 310cc wheel motors Unmatched hillside confidence Dual rear wheels
Max speed: Up to 12 mph
Four-wheel steering wheel control and quick-adjust Oversized dual real wheels
Seat: Extra high-back air ride suspension, EVC cushion, steering column. provide a higher level of stability,
angled-back adjust, lumbar support, padded armrest, traction and precision.
isolated dampening system mounted base (lateral suspension). C
Features
25" x 9" – 12" dual rear wheels for ultimate traction
Four-wheel steering with EPS
cubcadet.ca/pro
7-gauge steel cutting deck with 7-gauge top B
and bottom reinforcements TR
IP
LE
Maintenance-free spindles
Electronic powered deck lift A
12-volt outlet kit included 25°
toughness.
WES NOLAND
construction, this zero-turn lineup will last for the long haul.
Zandex Health Care Corp.
3" total blade overlap The thickest, strongest steel deck in the industry
Tackle the toughest conditions with the industry-leading only triple-7-gauge steel
cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements.
A
DURABILITY QUALITY CUT
cubcadet.ca/pro
Beefed-up front end A 2" x 3" pivoting front axle
Absorb the impact of rough terrain
B Isolation-dampening system
with new front-end construction A (standard on the PRO Z 700 and 900 Series)
featuring a best-in-class combination
C 5" steel hubs
of axle, hub and yoke size.
13
PRO Z 500/700/900 COMFORT
PRO Z™ comfort
All-day Let the PRO Z absorb the punches so your body doesn’t have to.
Experience a smooth ride all day long with the enhanced comfort
comfort.
features of the PRO Z Series.
A Air-ride control
Isolation-dampening system
Angle adjustment
Pivoting front axle
with isolation-dampening system mounts
A A pivoting front axle allows the front end of the
Padded armrests
PRO Z to ride across unseen terrain while protecting
cubcadet.ca/pro
the quality of the cut.
Lumbar support The frame and axle float as the PRO Z moves,
allowing the deck to follow the shape of the terrain
and avoid scalping.
15
PRO Z 500/700/900 PERFORMANCE
“ I AM SAVING PRO Z™ performance
SEVERAL HOURS
A DAY OF
MOWING TIME.”
Built for the If you’re looking to maximize your workday, look no further. High-torque commercial
transmissions are paired with high-horsepower commercial-grade engines to provide
long run.
optimal and consistent blade tip speed. So you can power through the thickest grass
in one pass at maximum speed.
BROCK KENDRICK
Benchmark Lawns
Kawasaki ®
Max speed [mph] Horsepower and torque
high-horsepower engines
Horsepower [HP] Torque [ft-lb]
PRO Z 500 PRO Z 700 PRO Z 900
56.0 ft-lb
54.3 ft-lb
44.6 ft-lb
35 HP**
Commercial-quality cut
at high speeds 31 HP**
High-lift Marbain blades with blade tip speed
®
27 HP**
up to 18,500 fpm
cubcadet.ca/pro
Maximum horsepower in every series
Optimum balance of torque and power
Maximum blade tip speed up to 18,500 fpm
17
PRO Z 500/700/900 ACCESSORIES
PRO Z™ 500/700/900 featured accessories PRO Z 500/700/900 compatibility chart
Maximize your PRO Z performance. Make your PRO Z even more capable.
PRO Z 500 PRO Z 700 PRO Z 900
760 L
ATTACHMENT 548 L 554 L EFI 554 L KW 560 L KW 554 S KW 560 S KW 760 L KW 772 L KW 760 S KW 772 S KW 960 L KW 972 L KW 960 S KW 972 S KW 972 SD
KW/EFI
BAGGERS
MULCH KITS
DISCHARGE
LIGHT KITS
cubcadet.ca/pro
Light Kit
TIRE CHAINS
OTHER
15 cu-ft capacity / independent striping roller kit 26" Ultra Traction Tire / Rim
PTO-driven steel impeller. Adjustable rollers apply downward pressure onto
Caster Wheel Kit (deck-mounted)
the turf, leaving an enhanced stripe in the lawn.
18 19
PRO Z 100 OVERVIEW
PRO Z™ 100
Exceeds The PRO Z 100 allows you to go above and beyond without breaking the bank.
Professional-grade suspension seats come standard. The 48-, 54- and 60-inch
expectations.
cutting decks featuring 10-gauge steel deck shells offer a variety of cutting
widths. Maintenance-free sealed spindles and professional-grade EFI engines
create a professional zero-turn rider that offers maximum value it its class.
Not budgets.
Max speed [mph] Horsepower and torque
27 HP**
39.9 ft-lb
ATTACHMENT 148 L EFI 154 L EFI 160 L KW/KH EFI 148 S EFI 154 S EFI 160 S KW/KH EFI
cubcadet.ca/pro
54" Mulch Kit
Light Kit
Fuel Capacity 7 gal (twin 3.5 gal tanks) 14.9 gal (twin 7.45 gal tanks) with dial gauge 14.9 gal (twin 7.45 gal tanks) with electric gauge 14.9 gal (twin 7.45 gal tanks) with electric gauge
Transmission Hydro-Gear® ZT-3400 with charge pumps 12cc Parker® HTJ pump with hydro release lever 14cc Parker HTG pump with hydro release lever 16cc Parker HTG pump with hydro release lever Heavy-duty dual 16cc Parker HTG pump with hydro release lever
Ground Speed (forward / reverse) Up to 9.5 mph / 4.5 mph Up to 10 mph / 5 mph Up to 12 mph / 6 mph Up to 14 mph / 7 mph Up to 12 mph / 6 mph
MOWER DECK
Cutting Width 48" 54" 60" 48" 54" 60" 60" 72" 60" 72"
Deck Shell Construction Floating, fabricated 10 ga (0.135") steel shell (e-coated) Floating, fabricated 7 ga (0.187") steel Floating, fabricated 7 ga (0.187") steel Floating, fabricated 7 ga (0.187") steel
Reinforcements (top / bottom — leading edge) 2 ga / 7 ga – 1/4" 2 ga and 11 ga / 7 ga – 1/4" 7 ga / 7 ga – 1/4" 7 ga / 7 ga – 1/4" 7 ga / 7 ga – 1/4"
Side Reinforcement 5/16" steel 5/16" steel 5/16" steel 5/16" steel
Wear Guard 3/4" trim-side (polymer) 3/4" trim-side (polymer) 3/4" trim-side (polymer) 3/4" trim-side (polymer)
Blades / Blade-Tip Speed 3 high-lift Marbain® blades / 18,500 fpm (approx.) 3 high-lift Marbain blades / 18,500 fpm (approx.) 3 high-lift Marbain blades / 18,500 fpm (approx.) 3 high-lift Marbain blades / 18,500 fpm (approx.)
Spindle Construction 5" sealed cast-aluminum housing (maintenance-free) 8" sealed cast-aluminum housing (maintenance-free) 8" sealed cast-aluminum housing (maintenance-free) 8" sealed cast-aluminum housing (maintenance-free)
Discharge Chute High-density, impact-resistant rubber High-density, impact-resistant rubber High-density, impact-resistant rubber High-density, impact-resistant rubber
Deck Lift System Hand lever with spring assist Foot pedal with spring assist Foot pedal with spring assist Foot pedal with spring assist Electronic power deck lift system (included)
Height Positions / Height Range 15 / 1" – 5" 16 / 1" – 5" 16 / 1" – 5" 16 / 1" – 5"
CHASSIS
ROPS 2" x 2" quick-latch toolless foldable 3-position 2" x 2" quick-latch toolless foldable 3-position 2" x 2" quick-latch toolless foldable 3-position 2" x 2" quick-latch toolless foldable 3-position
Rear Bumper 5/16"-thick steel, standard rear hitch (e-coated) 5/16"-thick steel, standard rear hitch (e-coated) 5/16"-thick steel, standard rear hitch (e-coated) 5/16"-thick steel, standard rear hitch (e-coated)
Additional Bumper Features Pre-drilled mounts for attachments Pre-drilled mounts for attachments Pre-drilled mounts for attachments Pre-drilled mounts for attachments
Frame Fully welded, 12-ga channel frame (e-coated) Fully welded, 3/8" x 5" laser-cut steel full-length (e-coated) Fully welded, 3/8" x 5" laser-cut steel full-length (e-coated) Fully welded, 3/8" x 5" laser-cut steel full-length (e-coated)
Additional Frame Features 14-ga steel reinforcements Integrated tie-down slots Integrated tie-down slots Integrated tie-down slots
Front Axle 2" x 3" solid steel with sealed ball bearings 2" x 3" solid steel with sealed ball bearings 2" x 3" solid steel with sealed ball bearings and isolation-dampening system 2" x 3" solid steel with sealed ball bearings and isolation-dampening system
Front Yoke 3/8"-thick steel with sealed ball bearings 1/2"-thick steel with sealed ball bearings 1/2"-thick steel with sealed ball bearings 1/2"-thick steel with sealed ball bearings
OPERATION
Warner PTO clutch (225 ft-lb) Warner PTO clutch (200 ft-lb) Warner PTO clutch (225 ft-lb) Warner PTO Clutch
PTO Warner® PTO clutch (125 ft-lb) Warner PTO clutch (125 ft-lb) Warner PTO clutch (200 ft-lb) with Soft-Start
with Soft-Start with Soft-Start with Soft-Start (225 ft-lb) with Soft-Start
Steering Control (L/S models) Lap bar / adjustable tilting steering wheel with cruise control Lap bar / adjustable tilting steering wheel with electronic power steering (EPS) Lap bar / adjustable tilting steering wheel with EPS Lap bar / adjustable tilting steering wheel with EPS Adjustable tilting steering wheel with EPS
Operator Controls Low-profile throttle lever Low-profile throttle lever with dash guard Low-profile throttle lever with dash guard Low-profile throttle lever with dash guard
Sealed key switch / fingertip engagement PTO / resettable
Additional Controls Sealed key switch / fingertip engagement PTO Sealed key switch / fingertip engagement PTO / resettable maintenance meter Sealed key switch / fingertip engagement PTO / resettable maintenance meter Sealed key switch / fingertip engagement PTO / resettable maintenance meter
maintenance meter / 12 volt outlet kit
Parking Brake (L/S models) Integrated system / foot-operated pedal Hand operated with hydro-pump release Hand operated with hydro-pump release Hand operated with hydro-pump release
Front Tires (L/S models) Smooth 13" x 6.5" – 6" / turf 13" x 6.5" – 6" Smooth 13" x 6.5" – 6" / turf 15" x 6" – 6" Smooth (run flat) 13" x 6.5" – 6" / turf 16" x 6.5" – 8" Smooth (run flat) 15" x 6" – 6" / turf 16" x 6.5" – 8" Turf 16" x 6.5" – 8” with weighted rim
Rear Tires (L/S models) Turf 23" x 10.5" – 12" Turf 24" x 9.5" – 12" Turf 24" x 12" – 12" Turf 24" x 12" – 12" Turf 26" x 12" – 12" Dual TERRA TRAC Tread 25" x 9" – 12" (18” trac width)
High-back dial suspension, EVC cushion, seat belt, angle-back adjust, lumbar support,
Seat Type High-back suspension with seat belt, adjustable armrests and 6" seat travel High-back dial suspension with EVC cushion, seat belt, angle-back adjust and armrests High-back air-ride suspension, EVC cushion, seat belt, angle-back adjust, lumbar support, padded armrests, isolation-dampening system mounted base (lateral suspension)
padded armrests, isolation-dampening system mounted base (lateral suspension)
DIMENSIONS
Length 80" 80" 84" 86" 88"
Width (chute down / up) 49" / 61" 56" / 67" 62" / 73" 50" / 63" 56" / 67" 62" / 73" 62" 62" / 73" 74" / 85" 62" / 73" 74" / 85"
Height (ROP down / up) 48" / 70" 50" / 74" 52" / 74" 48" / 75" 52" / 75" 49” / 75”
Weight (L/S models) 970 / 1,000 lbs 1,000 / 1,030 lbs 1,030 / 1,060 lbs 1,272 lbs 1,300 / 1,438 lbs 1,324 / 1,462 lbs 1,424 lbs 1,424 / 1,562 lbs 1,475 / 1,613 lbs 1,442 / 1,580 lbs 1,591 lbs / 1,631 lbs 1,850 lbs.
WARRANTY
2-year / no-hour-limit commercial warranty 3-year / no-hour-limit commercial warranty 3-year / no-hour-limit commercial warranty 3-year / no-hour-limit commercial warranty
Warranty Information*
4-year / 500-hour limited residential warranty 5-year / 1,750-hour deck-construction warranty 5-year / 1,750-hour deck-construction warranty 5-year / 1,750-hour deck-construction warranty
22 23
PRO HW SERIES
PRO HW ™
Shown left and below: PRO HW 354
Series
cubcadet.ca/pro
Tackle the Ready, willing and more than able. We’ve created a beast of a
machine without sacrificing maneuverability. The PRO Hydro Walk
toughest terrain. Series features oversized rear tires and heavy-duty construction with
the flexibility to handle any terrain.
24 25
PRO HW 300 OVERVIEW
PRO HW™ Series
PRO HW 354
10-gauge deck design
A 10-gauge deck shell with 7-gauge top and bottom
Horsepower: 18.5 HP** reinforcements also features a 3/16-inch leading edge
ransmission: Hydro-Gear®
T and 1/4-inch side reinforcements. A 7-gauge leading
cubcadet.ca/pro
ZT 2800 (de qualité professionnelle)
edge and 1/4-inch side reinforcements add to the all-
Engine: Electric start
around heavy-duty construction
Deck: 54" 10-gauge deck
Tires: 18” rear tires
26 STEP-UP 27
PRO HW ACCESSRIES AND SPEC CHART
PRO HW™ 300 accessories PRO HW SERIES PRO HW
FULL SPECS
Side-mounted steel bagger with 4.3 cubic feet Mesh bag with two compartments to be used Reduce operator fatigue by turning your walk- Rear Bumper N/A
of capacity for grass, leaves and debris. for debris pickup and/or water bottle. behind into a stand-on with durable, welded steel Additional Bumper Features N/A
construction and 280-pound capacity. Dual wheels Frame Operator tower with 7-ga construction
provide more stability, and quick-release latch Additional Frame Features Frame-mounted foot-pedal front-end lift assist
makes transportation easier. Front Axle 1.5" x 3" fully welded tube
Front Yoke 3/8"-thick steel with sealed ball bearings
OPERATION
Single-wheel sulky (not pictured) PTO Warner® PTO clutch (125 ft-lb)
Reduce operator fatigue, turning your walk-behind into
Steering Control Hand-lever steering control with ball-bearing linkage for smooth feel
cubcadet.ca/pro
a stand-on with durable, welded steel construction Operator Controls Single-knob straight-line tracking adjustment
and 200-pound capacity. Quick-release latch makes Additional Controls Single-level speed control (0–7 mph)
transportation easier. Parking Brake Hand-operated lever
Front Tires Smooth (run flat) 9" x 3.5" – 4" Smooth (run flat) 11" x 4" – 5"
Rear Tires Turf 16" x 6.5" – 8" Turf 18" x 8.5" – 8"
DIMENSIONS
Length 77"
Width 38" / 49" 50" / 61" 56" / 67"
Discharge restrictor kit Light kit Mulch kit (not pictured) Height 45" 46"
Weight 590 lbs 665 lbs 720 lbs
Temporarily closes off deck discharge opening Illuminate your mowing path with the easy- Curved mulching blades circulate grass clippings
WARRANTY
from operator station when mowing around to-install pre-wired LED light kit that has beneath the deck to create smaller clippings
manicured beds, sidewalks or water. pre-drilled mounting points. that decompose more quickly, releasing nutrients Warranty Information* 2-year / no-hour-limit commercial warranty
Air-powered efficiency.
CB 2800 Rotating air nozzle
Electronic rocker switches (available on CB 2900) allow
p to 2,400 cfm of air volume
U 180-degree rotation of the air nozzle, eliminating the need
and up to 200 MPH air speed
to pull the unit backward when blowing in one direction.
15 degrees up/down internal air
and directional pitch control
Large adjustable air intake
29cc Kohler® OHV engine
4 Control airflow to 100%, ensuring you have just the right
amount to get the job done without disrupting flowerbeds
and mulched areas.
Self-propelled functionality
You get enhanced maneuverability with six operating speeds
on self-propelled model, along with two reverse speeds.
CB 2900
cubcadet.ca/pro
15-degrees up/down internal air
and directional pitch control
work of leaf debris and property cleanup. With unique air discharge control
options and available self-propelled functionality on select models, there
are options for every application. Allowing you and your crew to get the job
done with precision and ease.
Shown far left: CB 2900
Shown left: CB 2900
30 STEP-UP 31
YOUR AUTHORIZED CUB CADET DEALER
®
Demo a PRO Series unit and see for yourself. Visit CubCadet.ca/PRO.
* 3-year unit warranty, unlimited hours. 5-year deck warranty up to 1,750 hours. For full warranty details and
exclusions, visit www.cubcadet.ca or your local dealer.
** As rated by Kohler, all power levels are stated in gross horsepower at 3600 RPM per SAE J1940. As required
by Kawasaki, horsepower tested in accordance with SAE J1995 and rated in accordance with SAE J2723 and
certified by SAE International.
†
Offer subject to credit approval. Some restrictions apply. See store associate for details.
Cub Cadet commercial products are intended for professional use. See owner’s manual or your local Cub Cadet
Independent Dealer for warranty details and information. Certain restrictions apply.
This brochure is for advertisement purposes only. The product depictions are not meant to be used or relied upon
as a substitute for the safety and use information that is published in the respective operator’s manual and on the
machine. Models subject to limited availability. Specifications and programs are subject to change without notice.
Images may not reflect dealer inventory and/or unit specifications.
© 2019 Cub Cadet 881-11294