Académique Documents
Professionnel Documents
Culture Documents
INDEX OF DRAWINGS
Anti-Icing Vault Location (ICE-X-XX-XX)
Designer to locate prior to FOR, Dwg. No. AI 1 OVERALL SYSTEM LAYOUT AND GENERAL NOTES
See Grading and Access Plan or Dwg. No. AI 2 SYSTEM SCHEMATIC
Roadway drawings for location. Dwg. No. AI 3 GRADING PLAN & SAMPLE DETAILS
Structure # X-XX-XX Dwg. No. AI 4 VAULT STRUCTURAL DETAILS
Wall
GENERAL NOTES
DESIGNER/DETAILER:
1. See Roadway and Bridge plans for elevations and geometry.
1. Check with Maintenance for preferred locations
Wall Wall of vault.
2. Exact placement of conduit, valve control boxes and nozzles on
2. Provide minimum 20’x20’ "level" area around
the bridge and approach slabs shall be coordinated with the
the anti-icing vault for refilling activities.
Anti-Icing system supplier prior to construction.
3. For bad drainage areas provide french drain
system around vault and drain piping to low
3. Pavement sensors shall be installed per Manufacturer’s
XX’
area. Quantities will need to be calculated
recommendations.
and supplied in Roadway Quantities.
4. Have Geotech do a preliminary drilling if
4. All concrete shall be Class D.
bedrock may be a concern.
5. Tanks that fit through 3’ roof opening have a
5. Grade 60 reinforcing steel is required.
220 gallon capacity. Max capacity for
10/13
XX’
current layout is 1320 gallons (6 tanks).
6. Steps shall be in accordance with AASHTO M199.
y)
f’c.
i
(Prel
prior to construction.
Limits
XXX
XXX
Grade Level
ti
Quanti
Discharge Pipe
Quanti
Control Box
DESIGN DATA
AASHTO, Sixth Edition LRFD
Service line(s) to
MM/YY
MM/YY
DATE
Compacted bridge
~
Live Load:
XXX
XXX
(Class 1)
Traffic surcharge on exterior walls = 2’
l
Detai
Ko=0.44
ed By
Above
Vault Dimensions 1’-6" Typ.
l
Detai
Reinforced concrete:
Class D Concrete: f’c = 4,500 psi
Sump
EXCAVATION AND BACKFILL Reinforcing Steel: fy = 60,000 psi
MM/YY
MM/YY
DATE
only and are required for each Anti-Icing Vault: DESCRIPTION UNIT X-XX-X TOTAL
NO.
gn
Desi