Académique Documents
Professionnel Documents
Culture Documents
SERVICE MANUAL
S45H5LC37GB5U
MODEL LC-37GB5U
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
OUTLINE
This model is based on the LC-37D7U and is equipped with a redesigned speaker, and is changed some
function. This Service Manual covers the modifications alone. For the other points, refer to the LC-26/32/
37D7U Service Manual.
CONTENTS
Page
» LIST OF CHANGED PARTS ...........................................................................................................................2
» IMPORTANT SERVICE SAFETY PRECAUTION ........................................................................................ 3
» SPECIFICATIONS........................................................................................................................................6
» OPERATION MANUAL ................................................................................................................................7
» DIMENSIONS ............................................................................................................................................14
» REMOVING OF MAJOR PARTS ................................................................................................................15
» BLOCK DIAGRAM .....................................................................................................................................22
» OVERALL WIRING DIAGRAM ...................................................................................................................24
» PARTS LIST ...............................................................................................................................................26
» PACKING OF THE SET .............................................................................................................................31
2
LC-37GB5U
3
LC-37GB5U
4
LC-37GB5U
LFa
Indicates lead-free solder of tin, silver and copper.
3 Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220°C which is higher than the conventional lead
solder by 40°C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the
PWB for extended period of time. However, Since the land may be peeled off or the maximum heat-resistance
temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering
condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on
and off the power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after
every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Be careful when replacing parts with polarity indication on the PWB silk.
5
LC-37GB5U
SPECIFICATIONS
As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
6
Part names
TV (Front) TV (Rear)
INPUT 3 MONITOR
terminals OUTPUT
terminals
INPUT 1 INPUT 2
terminals terminals
DIGITAL
7
AUDIO
OUTPUT
Antenna input
terminal (ANALOG)
Antenna input terminal
(DIGITAL)
SYSTEM
RESET**
* Press RESET if the TV cannot return to its original state after performing various operations.
AV MODE resets to DYNAMIC (Fixed)
TV channel returns to initial channel setting (Air: 2ch, Cable:1 or 2ch)
Audio setting initializes
Dolby Virtual resets to Off
Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
Pressing RESET will not work if the TV is in standby mode.
Pressing RESET will not delete channel preset or secret number.
OPC sensor*
Remote control sensor OPC indicator*
POWER indicator**
LC-37GB5U
Part names Using external equipment
Remote control unit 1 TV POWER: Switches the TV power on or enters
standby mode.
You can connect many types of external equipment to your TV, like a DVD player, VCR, Digital TV tuner, PC,
HDMI equipment, game console and camcorder. To view external source images, select the input source from
2 DISPLAY: Displays the channel information. INPUT on the remote control unit or on the TV.
1 11
LC-37GB5U
7 18
14 FLASHBACK: Returns to the previous channel or
To watch a DVD image, select "INPUT1" from "INPUT
19 external input mode. SOURCE" menu using INPUT on the remote control
unit or on the TV.
15 INPUT: Selects a TV input source. (TV, INPUT 1, INPUT
8 20 2, INPUT 3, INPUT 4, INPUT 5) The setting is stored and can be selected on the
21 INPUT SOURCE "INPUT SOURCE" menu.
16 CH / : Selects the channel.
22 TV(Air)
8
17 MUTE: Mutes the sound.
23 CAUTION
18 MENU: Displays the menu screen. TV(Cable)
To protect all equipment, always turn off the TV before
24 19 / / / /ENTER: Selects a desired item on the
INPUT1 connecting to a DVD player, VCR, Digital TV tuner, PC,
screen.
9 HDMI equipment, game console, camcorder or other
20 RETURN: Returns to the previous menu screen. INPUT2 external equipment.
21 FAVORITE CH INPUT3
10 25 A, B, C, D: Selects four preset favorite channels in four NOTE
different categories. INPUT4
Please refer to the relevant operation manual (DVD player,
While watching, you can toggle the selected channels INPUT5 PC, etc.) carefully before making connections.
by pressing A, B, C and D. Each time INPUT is pressed, the input source toggles.
(Example) Refer to your external equipment operation manual for
22 FREEZE: Sets the still image. Press again to return to
the signal type.
normal screen.
NOTE
23 CC: Displays captions during closed-caption source.
If the image does not come in clearly, you may need to
change the input signal type setting on the "Input Select"
24 EDIT: Registers favorite channel.
menu.
25 AV MODE: Selects an audio or video setting.
(AV mode: STANDARD, MOVIE, GAME,
USER, DYNAMIC (Fixed), DYNAMIC. PC mode:
STANDARD, USER.)
NOTE
• When using the remote control unit, point it at the TV.
Using external equipment
Connecting a DVD player Connecting a VCR, game console or camcorder
You can use the INPUT 1, INPUT 2, INPUT 3 and INPUT 5 terminals when connecting to a DVD player and other A VCR, game console, camcorder and some other audiovisual equipment are conveniently connected using
audiovisual equipment. the INPUT 1 to 3 terminals.
When using component cable. (INPUT 1 or 2) NOTE
The S-video terminal has priority over the video terminals. (INPUT 3 only)
DVD player
When using composite cable. (INPUT 1, 2 or 3)
VCR/Game console/
Camcorder
AV cable
(commercially available)
9
DVD player
DVD player
LC-37GB5U
Using external equipment
Connecting a Digital TV STB (Air or Cable) Connecting HDMI equipment
You can use the INPUT 1, INPUT 2, INPUT 3 or INPUT 5 terminals when connecting a Digital TV STB and other You can use the INPUT 4 terminal when connecting an HDMI equipment.
LC-37GB5U
audiovisual equipment.
When using component cable. (INPUT 1 or 2)
HDMI cable
(Commercially available)
Digital TV STB
When using composite cable. (INPUT 1, 2 or 3) HDMI equipment
10
INPUT SOURCE
HDMI Setup
Selectable items Description
TV(Air) items
Signal Auto/RGB/YCbCr Select the signal type from
INPUT1 Type 4:4:4/YCbCr 4:2:2 an HDMI terminal. Unless
INPUT2 the image quality looks
Digital TV STB obviously poor, select Auto.
INPUT3
Color Auto/ITU601/ Select the internal color
When using DVI cable. (INPUT 5) INPUT4 Matrix ITU709 space conversion method
when an RGB signal is
INPUT5 input. Normally, select
Auto.
Audio Only
HDMI Setup
1 2
11
NOTE
PC with analog RGB terminal To attach the stand, perform the above steps in reverse order.
PC/MAC Resolution Horizontal Frequency Vertical Frequency VESA Standard When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal
PC 31.5 kHz 60 Hz (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be
640 x 400 made, enabling automatic programmed playing.
37.9 kHz 85 Hz O
31.5 kHz 60 Hz Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the
720 x 400 connections.
37.9 kHz 85 Hz O
VGA
31.5 kHz 60 Hz O NOTE
37.9 kHz 72 Hz O This operation system should be used by a person who is accustomed to using computers.
640 x 480
37.5 kHz 75 Hz O
43.3 kHz 85 Hz O Communication conditions
WVGA 848 x 480 31.5 kHz 60 Hz Set the RS-232C communications settings on the PC to match the TV's communications conditions.
35.1 kHz 56 Hz O The TV's communications settings are as follows:
37.9 kHz 60 Hz O Baud rate: 9,600 bps
SVGA 800 x 600 48.1 kHz 72 Hz O Data length: 8 bits
46.9 kHz 75 Hz O Parity bit: None
53.7 kHz 85 Hz O Stop bit: 1 bit
48.4 kHz 60 Hz O Flow control: None
56.5 kHz 70 Hz O
XGA 1024 x 768
60.0 kHz 75 Hz O Communication procedure
68.7 kHz 85 Hz O Send the control commands from the PC via the RS-232C connector.
1280 x 720 45.0 kHz 60 Hz The TV operates according to the received command and sends a response message to the PC.
WXGA Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending
1280 x 768 48.1 kHz 60 Hz
SXGA 1280 x 1024 64.0 kHz 60 Hz O the next command.
MAC13" VGA 640 x 480 34.9 kHz 67 Hz
MAC16" SVGA 832 x 624 49.7 kHz 75 Hz Command format
MAC19" XGA 1024 x 768 60.2 kHz 75 Hz Eight ASCII codes + CR
Command 4-digits: Command. The text of four characters.
C1 C2 C3 C4 P1 P2 P3 P4 Parameter 4-digits: Parameter 0 9, x, blank, ?
12
Command 4-digits Parameter 4-digits Return code
Parameter
Apple and Macintosh are registered trademarks Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4 values are input for the
of Apple Computer, Inc. parameter.)
DDC is a registered trademark of Video Electronics When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response code format".)
Standards Association. No problem to input any numerical value for "x" on the table.
Power Management is a registered trademark of
Sun Microsystems, Inc. 0
VGA and XGA are registered trademarks of
International Business Machines Co., Inc. 0 0 0 9
- 3 0
1 0 0
0 0 5 5
When "?" is input for some commands, the present setting value responds.
?
? ? ? ?
Appendix Basic adjustment settings
Response code format AV input mode menu items Digital Setup
Normal response
List of AV menu items to help you with
O K operations Video Setup
Audio Setup
Picture
Return code (0DH)
Problem response (communication error or incorrect command)
OPC PC input mode menu items
E R R Backlight
Contrast
List of PC menu items to help you with
operations
Return code (0DH) Brightness
Color Picture
Command table
• About the command except being indicated here, it is outside the guarantee range of operation. Tint
Sharpness OPC
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POWER SETTING P O W R 0 _ _ _ It shifts to standby. Advanced Backlight
INPUT SELECTION A TOGGLE I T G D x _ _ _ (Toggle) It input-switches by the toggle. (It is the same as an input change key) C.M.S. Contrast
TV I T V D x _ _ _ It input-switches to TV. (A channel remains as it is. (Last memory))
INPUT1-5 I A V D * _ _ _ Input terminal number (1- 5) It input-switches to INPUT1~INPUT5. Color Temp. Brightness
INPUT SELECTION B INPUT 1 I N P 1 0 _ _ _ AUTO An input change is also included. Black Red
1 _ _ _ VIDEO
2 _ _ _ COMPONENT
3D-Y/C Green
INPUT 2 I N P 2 0 _ _ _ AUTO Monochrome Blue
1 _ _ _ VIDEO
2 _ _ _ COMPONENT
Film Mode Advanced
INPUT 5 I N P 5 5 _ _ _ DIGITAL PC I/P Setting C.M.S.
6 _ _ _ ANALOG PC
7 _ _ _ DIGITAL AV
8 _ _ _ ANALOG AV
AV MODE SELECTION A V M D 0 _ _ _ (Toggle) Although it can choose now, it is toggle operation in inside. Audio Audio
1 _ _ _ STANDARD
2 _ _ _ MOVIE
3 _ _ _ GAME Treble Treble
4 _ _ _ USER
5 _ _ _ DYNAMIC (Fixed)
Bass Bass
6 _ _ _ DYNAMIC Balance Balance
VOLUME V O L M * * _ _ Volume (0- 60)
H-POSITION H P O S * * * _ AV mode. ( ± 10)
Dolby Virtual Dolby Virtual
POSITION * * * _ INPUT5: AV mode. ( ± 90)
13
* * * _ PC mode. (0- 180)
V-POSITION V P O S * * * _ AV mode. ( ± 20)
Power Control Power Control
* * * _ INPUT5: AV mode. ( ± 50)
* * * _ PC mode. (0- 100)
CLOCK C L C K * * * _ Only PC mode. (0- 180)
PHASE P H S E * * * _ Only PC mode. (0- 40)
No Signal Off Power Management
VIEWMODE W I D E 0 _ _ _ (Toggle) [AV] Although it can choose now, it is toggle operation in inside. No Operation Off
1 _ _ _ Side Bar [AV]
2 _ _ _ S.Stretch [AV]
3 _ _ _ Zoom [AV]
4 _ _ _ Stretch [AV] Setup Setup
5 _ _ _ Normal [PC]
6 _ _ _ Zoom [PC]
7 _ _ _ Stretch [PC] EZ Setup Input Signal
8 _ _ _ Dot by Dot [PC]
MUTE M U T E 0 _ _ _ (Toggle)
CH Setup Auto Sync.
1 _ _ _ On Antenna Setup-DIGITAL Input Label
2 _ _ _ Off
Dolby Virtual
Input Label Fine Sync.
A C D V 0 _ _ _ (Toggle)
1 _ _ _ On Parental CTRL Picture Flip
2 _ _ _ Off Position Language
AUDIO SELECTION A C H A x _ _ _ (Toggle)
SLEEP TIMER O F T M 0 _ _ _ OFF Picture Flip
1 _ _ _ OFF TIMER _ 30 MIN. Language
2 _ _ _ OFF TIMER _ 60 MIN.
3 _ _ _ OFF TIMER _ 90 MIN.
4 _ _ _ OFF TIMER _ 120 MIN. Option
CHANNEL DIRECT D C C H * * * _ The channel number of TV An input change is included if it is not TV display.
Option
CHANNEL (1- 125) In Air, 2- 69ch is effective.
(ANALOG) In Cable, 1- 125ch is effective. Audio Only
DIRECT D A 2 P * * * * (0101-9999) DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
Audio Only Input Select
CHANNEL
(DIGITAL) Digital Noise Reduction Output Select
CH UP C H U P x _ _ _ The channel number of TV + 1 If it is not TV display, it will input-switch to TV. (same function as CH ) HDMI Setup Quick Shoot
CH DOWN C H D W x _ _ _ The channel number of TV - 1 If it is not TV display, it will input-switch to TV. (same function as CH )
CC C L C P x _ _ _ (Toggle) Toggle operation of a closed caption. Input Select
Output Select
NOTE Quick Shoot
If an underbar (_) appears in the parameter column, enter a space. Caption Setup
If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
As long as that from which the parameter ( × ) in the table is a numerical value, it may write anything.
LC-37GB5U
LC-37GB5U
DIMENSIONS
Unit: inch/(mm)
2621/32 (677)
323/8 (822.6)
2139/64 (549)
2431/32 (634)
181/4 (463.8)
141/4 (362)
125/64 (307)
77/8 (200)
349/64 (96)
7 /8 (200)
7
1415/64 (361.5)
14
LC-37GB5U
SD Card Cover
3
Terminal Cover
Front Cabinet
2
1 4
Rear Cabinet
Stand
15
LC-37GB5U
6 Top Control
Cover Center Angle
P151
8
KEY PWB 7
LCD PWB Shield
P2002
9 Main Shield A
16
LC-37GB5U
(SC4651) (CN7404)
(CN7542) (SC4652) (P7705)
(P7704) (SC4601) (P7707)
(CN7543) (P2004) (CN7501) (CN7405)
(CN704)
(CN7541) (P3804) (P2006) (P2003)
(CN7544) (P1105) (P5703) (P1802) (SC3200) (CN703) (CN7406)
(P2501) (CN706)
(CN7545) (P3805) (CN7407)
(SC3202) (CN7502)
(CN7547) (SC3202) (CN707)
(CN7546) (SC9601) (CN7408)
(SC3201) (SC3201) (CN7503)
(P1501)
(CN7471)
(CN7612) (P3101) (P1804) (CN705) (CN7472)
(P7611)
(P1803)
(CN7613) (CN7473)
(CN702)
(CN7614) (CN7474)
(CN7615) (CN7475)
10. Remove the 5 lock screws 0 and detach the Main Shield B.
11. Remove the 4 lock screws q and detach the Digital PWB
12. Remove the 4 lock screws w and detach the Jack Cover C.
13. Detach the 2 Speaker Box.e
11
Digital PWB
10
Main Shield B
12 Jack Cover C
13 13
17
LC-37GB5U
14. Remove the 6 lock screws r. Detach the Main PWB and Main Shield C.
15. Remove the AV PWB.
15-1. Remove the 3 lock screws t, 2 screws y, and detach the AV PWB.
15-2. Remove the 1 lock screw i and detach the Jack Cover B.
15-3. Remove the 4 lock screws o and detach the Jack Cover A.
16. Remove the 1 lock screw p and detach the LCD Controller PWB. Detach the Radiation Shields.
15
AV PWB
19
Jack Cover A
16 Radiation
Shield
Jack Cover B 18
Main Shield C
Main PWB
Radiation Shield
14
18
LC-37GB5U
17. Remove the 6 lock screws a and detach the Power PWB.
18. Remove the 6 lock screws s. Detach the INVERTER-GND A and INVERTER-GND B PWB.
19. Remove the 8 lock screws d. Detach the INVERTER A and INVERTER B PWB.
20. Remove the 2 lock screws 24 and detach the R/C LED PWB.
21. Remove the 2 lock screws 25 and detach the LCD Panel Ass'y.
21
Power PWB
23
22
25
INVERTER-GND A INVERTER
and B PWB A and B PWB
R/C, LED
PWB 24
19
LC-37GB5U
22. Remove the 4 lock screws 26 from the 37" LCD Panel Unit, and detach the 37" LCD Panel Unit.
23. Detach the sheet spacer 1 and sheet spacer 2.
24. Detach the Diffusion and Reflection/Deflection Sheets and Diffusion Panel.
25. Remove the 6 lock screws 27 from the Lamp Holder (top), and detach the Lamp Holder (top).
26. Remove the Fluorescent Lamps.
Lamp Holder(Top)
Sheet Spacer 1
(PSPAKA092WJZZ)
Sheet Spacer 2
(PSPAKA093WJZZ)
27
Lamp Holder(Top)
27 (LHLDZA521WJKZ)
26
Diffusion Panel
(PCOVUA053WJZZ)
Diffusion Sheet
37" LCD Panel Unit (PSHEPA290WJZZ )
Reflection/Deflection Sheet
(PSHEPA245WJZZ)
20
LC-37GB5U
-MEMO-
21
LC-37GB5U LC-37GB5U
BLOCK DIAGRAM
J
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
22 23
LC-37GB5U LC-37GB5U
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
24 25
LC-37GB5U
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
DUNTKC793FE33
LCD CONTROL UNIT
LCD PANEL RESISTORS
R2029 VRS-CY1JF223JY J 22K 1/16W Metal Oxide AA
NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN
ASSEMBLY BUT NOT INDEPENDENTLY.
DUNTKC956FE07
RLCDTA036WJZZ J 37” Wide LCD Panel Unit EW
(LK370T3FZA0A) DIGITAL UNIT
INTEGRATED CIRCUITS
IC8451 VHiLHF12F01-1Q J LHF12F01 BK
RESISTORS
R8176 VRS-CH1JF103JY J 10K 1/16W Metal Oxide AA
R9509 VRS-CH1JF000JY J 0 1/16W Metal Oxide AA
R9529 VRS-CZ1JF472JY J 4.7K 1/16W Metal Oxide AA
26
LC-37GB5U
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
27
LC-37GB5U
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
28
LC-37GB5U
64 S L 81
1-4 h
96
L L
1-3 7
1-1 103
G
1-3 82
1-4 f
8
65 E
1-5 L 96 N
28 B D H 6-2-3
1-6 1-2
6-2-1 6-2-8 F
G
A 6-2-9 I
F 6-2-4 6-2-2
6-2-6
6-2-8
O 6-2-10
6-2-5
6-2-6
6 6-6
6-8 6-2-7
6-7 P
6-9
6-10 6-11
B
6-4 6-2-4 4-2
E
6-3
Q 4-1
R 4-2
4
6-2 10 4-2
17
6-11 6-4 102
95
6-5 2
A 101
6-9
D 6-1 6-10
94
2-1 2-4 2-2
D 2-3
68 100
O
2-4
34 K
E 42
47 93 2-5
90 33 20
93 94 19
Q 73 31
U 110
C R
90 23
51 60 100 100 37
j A
100 27
69 35 18
V Y k 100
V 100
84 Z F 83 54 43 100 89
S 100 62 36
50 45 57 52 32
U
91 b
22 T 49 39 53 98
21 100 W 24
100 110 77 55 111
46 M N X
80 Z 100 d 56
W c j h
92 X K
G 38
B b 85 95 78 f
M 48
59 86 e 87
74 11 k 5-2
e a 29 40 101
a 112 25
H c 63
75 d 14 5-1
44 30 99
61 T 95 99 12
43 Y P
100 13
5 5-3
41 88
70
A 76
I
71
1 2 3 4 5 6
29
LC-37GB5U
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
X5 Operation Manual
30
LC-37GB5U
S5
X1
X2
X3
X4
S5 X5
X6
X7
X8
S3
S4
S5
S5
S2
S7
S1
31
LC-37GB5U
TQ1888-S
Apr. 2005 Printed in Japan
Design and Production Information SHARP CORPORATION
Design : Japan AV Systems Group
Production : SEMEX Quality & Reliability Control Center
SY. KD Yaita, Tochigi 329-2193, Japan