Académique Documents
Professionnel Documents
Culture Documents
reviewer4@nptel.iitm.ac.in ▼
Unit 6 - Week 5
Register for
Certification exam Assignment 5
The due date for submitting this assignment has passed.
Course As per our records you have not submitted this Due on 2019-03-06, 23:59 IST.
outline
assignment.
Flyback transistor
Isolated DC-
DC Converters
No, the answer is incorrect.
II
Score: 0
Isolated DC-
Accepted Answers:
DC Converters
III Flyback transformer
A parallel combination
Powered byof controllable switch and a diode is used
Week 8
4) For a buck converter to reduce the conduction losses in diode 1 point
DOWNLOAD
VIDEOS A high on - resistance switch can be added in parallel
None of these
6) A Buck converter is driven by a constant input voltage 30V. The switching frequency is 10 1 point
kHz, the L and C of the converter are 1mH and 10μF. Calculate the output ripple voltage when duty
ratio of gate signal of the transistor is 0.5. The converter is operating in continuous mode.
0.1456V
0.9375V
0.9855V
0.9575V
7) A Ćuk converter operates at 50kHz switching frequency. The On-state time of the transistor 1 point
is 12μs. The input voltage is 100V. The load resistance varies between 50-500Ω. Considering the
converter operating in continuous mode, calculate the voltage rating of the diode.
250V
150V
260V
50V
8) The Flyback Converter has an input of 44V, an output of 3V, a duty ratio of 0.32 and 1 point
switching frequency of 300kHz. The load resistance is 1 ohm. Determine the transformer magnetizing
0.115
0.245
0.145
0.178
9) SCRs having turn-off times of 8 μsecs is connected in a load-commutated chopper. The 1 point
load current is 10 amperes, level. What is the minimum value of commutating capacitor necessary for
successful commutation. Supply voltage is 20 V DC.
0.4µF
0.6µF
0.8µF
0.1µF
10)Which among the following power supplies will be most energy-efficient if operated under 1 point
wide input voltage variation and at full load: