Académique Documents
Professionnel Documents
Culture Documents
2
DARA Lighting - Installation and quick check
Content:
Installation guide for DARA L Box 4
Quick check 24
DARA manual 27
3
DARA Lighting - Installation and quick check
Specifications can be modified without prior notice. All information is property of DARA Trademark and Software Owner.
The presentation picture is for information purposes only. Latest document update: February 18, 2019 10:03 AM.
4
DARA Lighting - Installation and quick check
Attention!
1. Turn power off before inspection, installation or removal.
2. Properly ground electrical enclosure.
3. Follow all IEC and local building codes.
4. Do not operate the device with damaged parts.
5. Please see technical data sheet for electrical properties to ensure safe installation.
6. The grounding and bonding of the overall system shall be done in accordance to local
electric code of the country where the luminaire is installed.
7. For indoor use, only.
8. Installation should be performed by a qualified electrician in compliance with these
instructions and applicable standards.
NOTE !
The antenna of the device, marked with the sign on the box, should always be oriented
towards the room. The antenna must not be oriented towards the ceiling, if top mounted,
nor towards the floor if mounted less than 1,5 m / 5 ft high.
5
DARA Lighting - Installation and quick check
DARA L Box
1 2
Click
3 DARA L supplies the DALI circuit with 250mA for up to 64 DALI individual addressed devices.
DALI wires
D- D+ NL
D- D+ N L
Power wires
D- D+ N L
6
DARA Lighting - Installation and quick check
DARA L Box
4 5
Click
Cable CYYF
5x1,5 sqmm
Legend:
DA + : Red
DA - : Black
Cable CYYF
L : Brown
3x1,5 sqmm Cable CYYF N : Blue
3x1,5 sqmm
L PE : Green and Yellow
N
7
DARA Lighting - Installation and quick check
Specifications can be modified without prior notice. All information is property of DARA Trademark and Software Owner.
The presentation picture is for information purposes only. Latest document update: February 18, 2019 10:03 AM.
8
DARA Lighting - Installation and quick check
Attention!
1. Turn power off before inspection, installation or removal.
2. Properly ground electrical enclosure.
3. Follow all IEC and local building codes.
4. Do not operate the device with damaged parts.
5. Please see technical data sheet for electrical properties to ensure safe installation.
6. The grounding and bonding of the overall system shall be done in accordance to local
electric code of the country where the luminaire is installed.
7. For indoor use, only.
8. Installation should be performed by a qualified electrician in compliance with these
instructions and applicable standards.
NOTE!
The antenna of the device, marked with the sign on the box, should always be oriented
towards the room. The antenna must not be oriented towards the ceiling, if top mounted,
nor towards the floor if mounted less than 1,5 m / 5 ft high.
9
DARA Lighting - Installation and quick check
1 2
Click
Click
Click
3 DARA L supplies the DALI circuit with 250mA for up to 64 DALI individual addressed devices.
L N D+ D-
Power wires
L N D+ D-
L N D+ D-
DALI wires
10
DARA Lighting - Installation and quick check
4 Click
Click
Click
Cable CYYF
5x1,5 sqmm
Legend:
DA + : Red
DA - : Black
Cable CYYF
3x1,5 sqmm
L : Brown
Cable CYYF
3x1,5 sqmm N : Blue
L PE : Green and Yellow
N
11
DARA Lighting - Installation and quick check
Specifications can be modified without prior notice. All information is property of DARA Trademark and Software Owner.
The presentation picture is for information purposes only. Latest document update: February 18, 2019 10:03 AM.
12
DARA Lighting - Installation and quick check
Attention!
1. Turn power off before inspection, installation or removal.
2. Properly ground electrical enclosure.
3. Follow all IEC and local building codes.
4. Do not operate the device with damaged parts.
5. Please see technical data sheet for electrical properties to ensure safe installation.
6. The grounding and bonding of the overall system shall be done in accordance to local
electric code of the country where the luminaire is installed.
7. For indoor use, only.
8. Installation should be performed by a qualified electrician in compliance with these
instructions and applicable standards.
NOTE!
The antenna of the device, marked with the sign on the box, should always be oriented
towards the room.
13
DARA Lighting - Installation and quick check
DARA L TRK
1 2
Click D- D+ N L
3 Attach the adaptor (EUTRAC, Stucchi, Global) you have been provided with for your specific track to the DARA device.
DALI wires D- D+ N L
D- D+ NL
D- D+ L
Power wires
D- D+ N L
14
DARA Lighting - Installation and quick check
DARA L TRK
4 Insert the device into the track. 5 Insert the adapter into the track, so that the mechanical
key (A) in the adaptor matches the groove (B) in the
track.
NOTE !
The adaptor and track in this image are used for
exemplifications. Small variations may occur depending on
your specific DALI track.
4 Rotate of about 90° the levers of the two cams (C and 2 When the track is connected to a three-phase system it
D) until they reach the locking position. is possible to select the phase (L1, L2 or L3) to distribute
the single device in the system, by means of the proper
selector (A) of the adaptor.
15
DARA Lighting - Installation and quick check
Download
DARA Lighting
application
16
DARA Lighting - Installation and quick check
Start by downloading DARA Lighting mobile app from App Store (for iOS)
or Google Play Store (for Android). The app is free for download.
The application can run on mobile phone or tablets, minimal requirements are:
iOS Android
iOS version 10 or newer, iPhone SE Android version 5.0.0 Lollipop or newer Mobile
iPhone 6 or newer, iPad 3 or newer devices with Bluetooth 4.2 or newer
We are constantly working to expand our compatibility list. For latest updates please check our website: www.daraapp.com
Once the app has downloaded, ensure that Bluetooth® is enabled on your device.
If you’re unsure, follow the steps below for an iOS or Android device.
18
DARA Lighting - Installation and quick check
1. Use your email address and password to log in to DARA Lighting mobile app.
2. You can also use your Facebook or Google account to sign in.
3. Once you’ve successfully logged in, you’ll see the networks you have access to, listed on the network screen.
4. To access a particular network, tap on its name.
19
DARA Lighting - Installation and quick check
Create or connect
to network
20
DARA Lighting - Installation and quick check
After installing DARA Lighting App, you need to create or connect to your network.
Before going forward with the setup, please make sure that your DARA devices are installed and powered.
1. To add a new network, tap on the “+ Add New Network” button. The app will begin to scan for new devices.
2. Scanning for new networks can take a while, so please be patient. When the scan is completed, you will be notified.
3. In case no new networks are detected, the search will return a message. Please re-check if your devices
are properly installed and powered, then push “Retry” when you’re ready to search again.
4. If the new network is found, you will be asked to scan your DARA device id (QR code) in order to register
your network.
5, Once your network is registered, you will be asked to input the Network’s name. Tap the “Name” field to activate the
keyboard and input a value.
6, When ready, hit “Create Network”. The application will register the network and start discovering the DARA devices.
7, Your network is now ready and you will be redirected to the main screen where all existing networks are displayed.
Tap your network’s name to connect to it.
21
DARA Lighting - Installation and quick check
22
DARA Lighting - Installation and quick check
1. The app will start scanning the network to identify new devices.
2. Once a new device is found, you will be notified and instructed to scan the DARA device id (QR code) in order to add
the device to the network.
3. Tap “Scan ID” to begin scanning your network ID. This is the QR code received along with your DARA devices.
4. After the QR code is successfully scanned, the “Add devices to Network” button becomes active. Tap it to complete
the process.
5. Adding devices can take a while, so please be patient and do not turn off the application.
23
DARA Lighting - Installation and quick check
Quick check
24
DARA Lighting - Installation and quick check
Before starting to manage your network’s lamps and groups, please follow these steps to ensure that everything is
properly set.
In case a lamp is not responding, please check first that the lamp is properly connected.
If this is the issue, please check the dimming for all lamps.
25
DARA Lighting - Installation and quick check
Quick check
Check that all lamps and sensors are discovered
1. Once the “Reset all settings” has been performed, go to “Settings” and enter the “Groups & Lamps” menu.
2. The “All” group is created by default and contains all discovered devices with their lamps and sensors.
Please check that no lamps or sensors are missing from this group.
3. To easily identify a device, tap the symbol located in front of it. This will trigger all the lamps and sensors
connected to that device to flash for a few seconds.
4. Tap the device’s name to expand it and view all its lamps and sensors.
5. To easily identify a lamp or sensor, tap the symbol (or) located in front of it. This will trigger it to flash for a few
seconds.
Recommendation
1. Create a new group and add lamps from different devices to it.
2. Then go to the Control screen, select your new group and dim it on and off.
Check that all lamps are correctly responding.
26
DARA Lighting - Installation and quick check
DARA Manual
The complete manual is available in the DARA Lighting app or can be downloaded from: www.daraapp.com
27
Contact
support@daraapp.com / sales@daraapp.com
www.daraapp.com