Vous êtes sur la page 1sur 110

AMBIAL

PW
DESIGN

5940.005
AMBIAL October 2018

PW
FOLDING DOOR
■■ Product concept P.3
■■ Product concept P.3
■■ Folding door, 3 leaves P.4
■■ Folding door, 3 corner leaves P.6
■■ PerformancesP.8
■■ Thermal performance P.8
■■ Weather performance P.11
■■ Acoustic performance P.12
■■ Use curves P.13
■■ InertiaP.15
■■ Infills P.17
■■ Infills P.17
■■ Applications P.19
■■ Outer frames P.19
■■ Description of frame symbols P.20
■■ Folding door 1 sash open in P.24
■■ Folding door 2 sash open out P.26
■■ 3 open out leaves P.28
■■ 4 open out leaves P.30
■■ 5 open out leaves P.32
■■ 5 open in leaves P.34
■■ 6 open out leaves P.36
■■ 8 open in leaves P.38
■■ 10 open out leaves P.40
■■ 2 open out corner leaves P.42
■■ 6 open out corner leaves P.44
■■ OptionsP.46
■■ Magnetic end stops assembly P.46
■■ Drainage principal P.47
■■ Main concealed drainage P.48
■■ Rebate thresholds application P.49
■■ Flat thresholds application P.50
■■ Rebate low thresholds application P.52
■■ Flat low thresholds application P.53
■■ Top frame rebate P.54
■■ Bottom rail finishing gasket and grooved brush gasket support P.55
■■ Bottom rail finishing gasket P.56
■■ Frame weather bar P.57
DESIGN

■■ Leaf weather bar P.58

1 AMBIAL PW
AMBIAL PW
■■ Leaf added weather bar P.59
■■ Variant of the glazing gasket P.60
■■ Variant of the rebate gasket P.61
DESIGN

■■ Adjustable frame mullion P.62


■■ Central gasket P.63
■■ Thermal insulation foam P.64
■■ Leaf transom P.65
■■ Intermediate transom: Infill dimensions P.66
■■ Choice of tools P.67
■■ Choice of corner-cleats and end caps P.68
■■ Choice of locks and handles P.69
■■ Hardware P.71
■■ Pull handle TPW6006 P.71
■■ Measurements P.72
■■ Choice and distribution of hinges P.73
■■ Choice and distribution of hinges for slave leaf and corner post P.75
■■ Handle assembly P.77
■■ Gear box handle assembly P.78
■■ Lever gearbox assembly P.79
■■ Main leaf: 3 locking points cylinder P.80
■■ Intermediate leaf: Cremone gearbox P.81
■■ Slave leaf: Lever gearbox P.82
■■ Corner leaf: Lever gearbox P.83
■■ Through unit P.84
■■ Through unit corner P.85
■■ Through unit, adjustable frame P.86
■■ Summary P.87
■■ Profiles P.87
■■ AccessoriesP.95
■■ Gaskets P.98
■■ ScrewsP.99
■■ ToolingP.100
■■ AbbreviationsP.102
■■ SymbolsP.103
■■ Summary of change P.104

2
Product concept

Product concept

PW - AMBIAL, the folding door with thermal barrier. System


carried on the bottom frame. Enables making up to 10
leaves, including 5 leaves maximum per side. Exterior or
interior opening with the same profiles, accessories and
hardware.
The main leaf can be made in the centre or on the side,
according to the type of application. Drainage:
Specific post and cap profiles allow to build outer openings at Frame drainage on front by oblongs holes 30x5mm
90º without visible post both in outwards and inwards and protected by drain cap.
opening.
Leaf drainage by holes Ø 10mm in the bars.
1 and 2-sash door possible with same profiles and
The transom leaf drainage is concealed.
accessories.
Concealed drainage available for all applications.
■ FRAMES Assembly:
Of frames by screwing and plugs.
Profiles 75mm with 3 thermal barrier chambers. Of leaves by expansion brackets with assembly
Thermal barrier provided by two centred bars. Bars made of by crimping or pinning.
polyamide PA 6.6 25% filled with fibreglass.
Frame, with or without groove, assembled in straight cut: Rebate corner-cleats for flush fitting of leaves
Top transom with integrated rebate and top transom with Assembly of transoms with connectors and pins.
added rebate. Assembly of rebate profiles on leaf transoms with POM
Frame mullion: Profile with added rebate if main leaf on the toggles.
side. ABS central cover or EPDM central gasket as option.
The frame bottom transom is equipped with finishing gasket Sealing:
between rail and tracks in stainless steel. Two At the top by brush with fin-sill and an EPDM
different applications: gasket.
• Flat threshold: with two profiles clipped for holding the
brush gasket At the bottom, two options:
• Rebate threshold: with a rebate profile and a profile • Flat threshold with two brushes
holding • Rebate threshold with one brush and an EPDM gasket.
the brush gasket.
The optional lateral frame for additional adjustment enables Between leaves sealing is obtained with a double tubular
adjustment of ± 5mm EPDM gasket.

■ INTERMEDIATE TRANSOMS Between main and semi-fixed leaves or frame


sealing is obtained with double barrier of EPDM interior and
Profiles 65mm with 3 thermal barrier chambers. exterior gaskets.
The thermal barrier is provided by two bars.
Bars made of polyamide PA 6.6 25% filled with glassfibre. Optional:
Profiles assembled in straight cut. The weather bar with brush pile bottom rail level when door
Transoms available in 40, 50, 80, 110 and 150mm installed on explosed site.
high. Weather bar with or without brush pile fixed at the top of the
frame when door installed to external wall.
■ LEAVES
■ ACCESSORIES
Tubular profiles 75mm with 3 thermal
barrier chambers. The centred thermal barrier is obtained Rollers and hinges:
with double crimped bar made of PA 6.6 25% filled with Each carriage can support a weight of 300kg, i.e. 150kg
glassfibre. per leaf and allows vertical adjustment on site
Leaf frame assembled in mitre cut. +3/-1mm with:
Two leaf profiles: • Top and bottom rollers.
• Leaf 75 x 63mm with cage 28mm • Top and bottom hinges.
• Reinforced leaf 77.4 x 73mm with cage 38mm. • Intermediate hinges with no play.

Rebate profile added on main and semi-fixed leaves Locks and handles:
if centre opening.
ABS central cover or EPDM central gasket as option. Intermediate leaves:
■ PRINCIPLES: Locking is done with gear boxes concealed
in the leaf.
Glazing: Locking of leaves of gear boxes with threaded
Holding of the glass in the leaves will be ensured with rod.
aluminium on aluminium attached glazing bead. With glazing Handle with or without key.
infill Specific lever handle for closing assistance
of 9mm up to 52mm thick. A PVC clip is added
for anodised finishes will ensure perfect flush fitting Main leaf:
of the glazing beads. Locking with 3 locking points.
For filling of more than 49mm the glazing bead fits Handle with single or double key-device, 8mm square.
on front with a stainless steel clip. Locking of gear boxes and door lock with threaded rod.
DESIGN

SEC-000048491

3 AMBIAL PW
AMBIAL PW Product concept

Folding door, 3 leaves


DESIGN

SEC-000048492

4
Product concept

Folding door, 3 leaves

DESIGN

SEC-000048492

5 AMBIAL PW
AMBIAL PW Product concept

Folding door, 3 corner leaves


DESIGN

SEC-000051289

6
Product concept

Folding door, 3 corner leaves

DESIGN

7 AMBIAL PW
AMBIAL PW Performances

Thermal performance
DESIGN

 Glazing U-values

VERTICAL GLAZING U-values according to glass specification


(Slope ≥ 60°) according to EN673

non-exhaustive list, for information DOUBLE GLAZING


thickness thickness Glazing U-value thickness Glazing U-value thickness Glazing U-value
Trade names certified / air gap (mm) 4+4 or 6+6 (mm) 4+10 or 4+FA44.1 (mm) FA64.1 + FA44.1
emissivity values or ARGON 6 + 6 argon 4 + 10 argon argon
(mm) air 85% air 85% air 85%
8 20 2.1 1,7 22 2.1 1,7 27
10 22 1,8 1,5 24 1,8 1,5
12 24 1,6 1,3 26 1,6 1,3
Planibel Top N (AGC) 0,04 14 26 1,5 1,2 28 1,5 1,2
16 28 1,4 1,2 30 1,4 1,2
18 30 1,4 1,2 32 1,4 1,2
20 32 1,4 1,2 34 1,4 1,2 39 1,4 1,2
Clima Guard Premium (Guardian)
8 20 2,1 1,7 22 2,1 1,7
iPlus Sun (Interpane)
iPasol neutre 73/42 10 22 1,8 1,5 24 1,8 1,5
Optitherm S3 & Suncool 70/40 (Pilk.) 12 24 1,6 1,3 26 1,6 1,3
0,03 1,5 1,2 1,4 1,2
Planibel Energy N & Planibel Top NT 14 26 28
Planistar (SGG) 16 28 1,4 1,1 30 1,4 1,1
Planitherm ultra N (SGG) 18 30 1,4 1,2 32 1,4 1,1
Sun-Guard Super Neutral 70/41 20 32 1,4 1,2 34 1,4 1,2 39 1,4 1,2
Planibel Energy NT (AGC) argon 90% argon 90% argon 90%
Stopray Vision 60-T
iPasol neutre 50/27 - 68/37 (Interpane) 14 26 1,4 1,1 28 1,4 1,1
0,02
IPasol natura 67/37 16 28 1,3 1,1 30 1,3 1,1
Sun-Guard Super Neutral 62/34 18 30 1,3 1,1 32 1,3 1,1
Sun-Guard Super Neutral 40/23 20 32 1,4 1,1 34 1,3 1,1 39 1,3 1,1
Sun-Guard E performance argon 90% argon 90% argon 90%
Planibel Top 1.0 (AGC) 14 26 1,4 1,1 26 1,4 1,1
Planitherm one (SGG) 0,01 16 28 1,3 1,0 28 1,3 1,0
CoolLite Xtrême 60/28 (SGG) 18 30 1,3 1,1 30 1,3 1,1
iPlus 1.0 (Interpane) 20 32 1,3 1,1 32 1,3 1,1 39 1,3 1,1

The emissivity values given comply with the CEKAL database


The most efficient glazing can be manufactured with a warm edge spacer, which significantly
improves window Uw performance. The performance tables of our products include this option.

 G-factor and light transmission of the glazing


G-factor (solar) DOUBLE GLAZING
and
Light Transmission TL G-factor g G-factor TL
(EN410) (EN410)
non-exhaustive list, for information
Glass Glass
Trade names certified / thickness 4+4 thickness 4+4
emissivity values low emissivity layer
in face 2
Planibel Top N (AGC) 0,04 0.60 0.78
Clima Guard Premium (Guardian) 0.63 0.80
iPlus Sun (Interpane) 0.43 0.71
iPasol neutre 73/42 0.42 0.73
Optitherm S3 (Pilkington) 0.61 0.80
Suncool 70/40 (Pilkington) 0,03 0.39 0.71
Planibel Energy N (AGS) 0.42 0.71
Planibel Top NT 0.64 0.80
Planistar (SGG) 0.42 0.71
Planitherm ultra N (SGG) 0.58 0.80
Sun-Guard Super Neutral 70/41 0.41 0.70
Planibel Energy NT (AGC) 0.45 0.75
Stopray Vision 60-T 0.37 0.60
iPasol neutral 50/27 (Interpane) 0.27 0.50
0,02
iPasol neutre 68/37 0.37 0.68
iPasol natura 67/37 0.37 0.67
Sun-Guard Super Neutral 40/23 0.23 0.40
Sun-Guard E performance 0.42 0.66
Planibel Top 1.0 (AGC) 0.50 0.70
Planitherm One (SGG) 0,01 0.49 0.71
CoolLite Xtrême 60/28 (SGG) 0.28 0.60
SEC-000045688 iPlus 1.0 (Interpane) 0.53 0.74

8
Performances

Thermal performance

 Uw values: thermal insulation (with leaf profile TPW1200)

* Swisspace or equivalent
** Foam option = gaskets TPW5002 + T790002
DESIGN

SEC-000048695

9 AMBIAL PW
AMBIAL PW Performances

Thermal performance
DESIGN

 Sw values: solar factor

SEC-000048696

10
Performances

Weather performance

 Frame under ITT (Initial Type Test) or ETI (Essais de Type Initiaux)

Results (as per NF EN 14351-1+A1)

Appllication Height x Air Watertightn Resistance


Width
Test No. Permeability ess to Wind load
Q4* Q100*

Folding door, 3 leaves Ext # 404/16/73-1


3 8A C3 0.26 2.2
L = 2400 x H = 2250 FCBA

Folding door, 4 leaves Ext # Q16-03-01


3 6A C3 0.26 2.21
L = 3160 x H = 2400 P.V. interne

Folding door, 4 leaves Ext # # Q16-03-02


3 3A C3 0.29 2.49
L = 3160 x H = 2400 P.V. interne

# Bottom rebate frame without weather bar


# # Bottom frame without rebate

* Permeability to air for NEW buildings (reference values).


(average per m² including walls)

equivalent
Q4 Pa Max to Q100 Pa Max
Individual dwelling m³/(h.m²) 0,6 5,1

Collective dwelling m³/(h.m²) 1 8,5

Note: Qp = Q100 x (P/100)2/3

Q100 = Leak rate at 100 Pa


P = Pressure Pa
Q = Leak rate at P Pa
DESIGN

SEC-000048490

11 AMBIAL PW
AMBIAL PW Performances

Acoustic performance
DESIGN

Acoustic reduction
Tests performed as per EN ISO 10140 & EN ISO 717
Frame dimensions H x L (2180 x 3650)

Glazing unit Window


Gasket performances performances
Application Glazing composition Test number
TAS0180 RW RW
RA RA,tr RA RA,tr
(C;Ctr) (C;Ctr)

3 open out 42 FCBA N°


44.2SI-16-10 ▲ 45 41 39
(-1;-5)
41 37
leaves 404 / 18 / 101 / 5

3 open out 32 20170130_RE_


4-16-4 ▲ 30 29 26
(-1;-4)
31 28 PW AMBIAL_2
leaves

As per prEN window 14351-1, this window performance is valid for:


- glazing Rw+Ctr (for index RA,tr) more than or equal to the tested glazing values
- corrections - 1dB for window area + 50% to + 100% / - 2dB for + 100% to + 150% / - 3dB for + 150% to + 200%

TPW5002 TPW5002

SEC-000050709

12
Performances

Use curves

Minimum leaf width 600mm


Minimum leaf height 572mm with HP = 348mm
Leaf height = H - 148mm
Max weight per leaf = 150kg
Number of hinges: H < 2250 = 3
H > 2250 = 4
Inertia required of leaf frame according to dimensions of the leaf in cm4

Width of leaf in mm
800 850 900 950 1000 1050 1100 1150 1200

2050
2100
2150
2200
2250
2300 Pressure Pa: 800
2350
Height of leaf in mm

Deflection : 1/150
2400
E = Young's Modulus Mpa: 70000
2450
2500
TPW1200 TPW1201
2550
2600
2650
2700
2750
2800
2850
2900

Inertia required of leaf frame according to dimensions of the leaf in cm4

Width of leaf in mm
800 850 900 950 1000 1050 1100 1150 1200

2050
2100
2150
2200
2250
2300 Pressure Pa: 800
2350
Height of leaf in mm

Deflection : 15 mm maxi
2400
E = Young's Modulus Mpa: 70000
2450
2500
TPW1200 TPW1201
2550
2600
2650
2700
2750
2800
2850
2900
DESIGN

SEC-000049136

13 AMBIAL PW
AMBIAL PW Performances

Use curves
DESIGN

Inertia required of leaf frame according to dimensions of the leaf in cm4


Width of leaf in mm
800 850 900 950 1000 1050 1100 1150 1200
2000
2050
2100
2150
2200
2250
2300 Pressure Pa : 1200
Deflection : 1/150
Height of leaf in mm

2350
2400 E = Young's Modulus Mpa : 70000
2450
2500
TPW1200 TPW1201
2550
2600
2650
2700
2750
2800
2850
2900

Inertia required of leaf frame according to dimensions of the leaf in cm4


Width of leaf in mm
800 850 900 950 1000 1050 1100 1150 1200
2000
2050
2100
2150
2200
2250
2300 Pressure Pa : 1600
Deflection : 1/150
Height of leaf in mm

2350
2400 E = Young's Modulus Mpa : 70000
2450
2500
TPW1200 TPW1201
2550
2600
2650
2700
2750
2800
2850
2900

Inertia required of leaf frame according to dimensions of the leaf in cm4


Width of leaf in mm
800 850 900 950 1000 1050 1100 1150 1200
2000
2050
2100
2150
2200
2250
2300 Pressure Pa : 2000
Deflection : 1/150
Height of leaf in mm

2350
2400 E = Young's Modulus Mpa : 70000
2450
2500
TPW1200 TPW1201
2550
2600
2650
2700
2750
2800
2850
2900

SEC-000049138

14
InertiaInertia

Inertia
For deformation verification of a profile with thermal break, the deflection calculation requires knowledge of the moment of
inertia Ix that varies according to the length. This value is calculated in compliance with annex C of standard EN 14024.

As per Axis XX’ As per Axis YY’

y
1200 1600 2000 2250 2500 3000
x x' Ref. Length
(mm) (mm) (mm) (mm) (mm) (mm)
y'

TFY1301 Inertia I(cm4) 14.52 18.61 21.65 23.10 24.29 26.06 19.20

TFY1302 Inertia I(cm4) 15.51 20.09 23.60 25.31 26.73 28.86 28.84

TFY1303 Inertia I(cm4) 18.01 23.85 28.66 31.13 33.22 36.51 76.10

TFY1304 Inertia I(cm4) 20.45 27.44 33.57 36.86 39.74 44.40 160.00

TFY1305 Inertia I(cm4) 23.78 32.23 40.24 44.79 48.93 55.95 353.75

TPW1100 Inertia I(cm4) 16.16 20.21 23.28 24.77 25.99 27.84 4.10

TPW1101 Inertia I(cm4) 16.18 20.42 23.70 25.31 26.65 28.68 5.68

TPW1102 Inertia I(cm4) 17.94 23.01 26.91 28.81 30.38 32.76 9.88

TPW1103 Inertia I(cm4) 16.24 20.25 23.29 24.76 25.96 27.77 4.00

TPW1107 Inertia I(cm4) 16.26 20.46 23.71 25.30 26.62 28.62 5.57

TPW1108 Inertia I(cm4) 18.04 23.07 26.93 28.82 30.37 32.72 9.67
DESIGN

15 AMBIAL PW
AMBIAL PW Inertia

Inertia
DESIGN

As per Axis XX’ As per Axis YY’

y
1200 1600 2000 2250 2500 3000
x x' Ref. Length
(mm) (mm) (mm) (mm) (mm) (mm)
y'

TPW1110 Inertia I(cm4) 18.41 23.36 27.27 29.22 30.85 33.33 8.35

TPW1200 Inertia I(cm4) 19.83 25.67 30.27 32.55 34.45 37.36 17.52

TPW1201 Inertia I(cm4) 26.67 35.30 42.63 46.46 49.77 55.01 32.98

TPW1202 Inertia I(cm4) 10.81 13.01 14.44 15.07 15.56 16.25 1.77

TPW1203 Inertia I(cm4) 31.30 35.80 38.30 39.50 40.00 41.50 12.11

TPW1500 Inertia I(cm4) 15.47 19.46 22.45 23.89 25.06 26.82 4.35

16
Infills

Infills

■ Outside gasket T410010 Colour code White Green Red Blue Yellow Brown

8 7 6 5 4 2
T410010 B
A B C
Internal TAS0018 TAS0016 T710004
gasket TAS0017 TAS0015 T710002
T197112
2 (transport option)
C Glazing beads A

2 T591001 46 47 48 49

5 T591002 43 44 45 46 47

9 T591003 39 40 41 42 43

75

TPW3816 TPW1200
12 T591004 36 37 38 39 40

15 T591005 33 34 35 36 37
Front face glazing:
remove 4mm from H and L from the hook
bead cutting formula
19 T591006 29 30 31 32 33

Fit an anti-sway clip TAT0049


to each end of 22 T591007 26 27 28 29 30
the ANODISED BEAD

24 T591008 24 25 26 27 28
■ Outside gasket T4010003

T4010003 26 T591009 22 23 24 25 26
A B C

T197112 29 T591010 19 20 21 22 23
2 (transport option)

32 T591011 16 17 18 19 20

34 T591012 14 15 16 17 18

37 T591013 11 12 13 14 15

75
41 T591014 9 10
TPW3816 TPW1200
DESIGN

Grey = recommanded infill thickness


SEC-000048494
17 AMBIAL PW
AMBIAL PW Infills

Infills
DESIGN

■ Powder coated and anodised profiles


Colour code White Green Red Blue Yellow Brown
T410010 A B C
8 7 6 5 4

2mm glazing wedge B


(not supplied)
Internal TAS0018 TAS0016 T710004
gasket TAS0017 TAS0015 T710002
TFY3816 C Glazing beads A

2 T591221 46 47 48 49 50 52

Grey = recommanded infill thickness

T770070

T770070
Compulsory
(5 per linear
metre)

■ Position of clip T770070 150 5/ml 150


150

150

When using this type of glazing bead, the


height and the width of the glass must be
reduced by 4 mm.
5/ml

5/ml

This type of glazing bead is not suitable for


internal or external impact test, in
accordance with EN 13049 standard.
150

150

150 5/ml 150


SEC-000051330

18
Applications

Outer frames

Profiles without Pressing groove


or
pressing groove profiles

Ref. TPW1108 Ref. TPW1102

Ref. TPW1103 Ref. TGY1100

Ref. TPW1107 Ref. TPW1101


DESIGN

SEC-000048444

19 AMBIAL PW
AMBIAL PW Applications

Description of frame symbols


DESIGN

The applications can be produced with the The frames are viewed from outside
Techdesign software.

Open in Open out

101-i 101-e
110-i 110-e

1 leaf 1 leaf

211-i 211-e

2 leaves 2 leaves

303-i 303-e
330-i 330-e

3 leaves 3 leaves

413-i 413-e
431-i 431-e

4 leaves 4 leaves

505-i 505-e
550-i 550-e

5 leaves 5 leaves

633-i 633-e

6 leaves 6 leaves

615-i 615-e
651-i 651-e

6 leaves 6 leaves

835-i 835-e
853-i 853-e

8 leaves 8 leaves

1055-i 1055-e

10 leaves 10 leaves

First number second number Third number Opening


Number of Leaves on the Leaves on the i = Insider e =
SEC-000048493 leaves left right Outside

20
Applications

Description of frame symbols


The applications can be produced with the The frames are viewed from outside
Techdesign software.

Open in Open out

AS-211-i AS-211-e

1 leaf of angle 1 leaf of angle

AS-413-i AS-413-e
AS-431-i AS-431-e

1 x 3 leaves of angle 1 x 3 leaves of angle

AS-633-e
AS-633-i

3 x 3 leaves of angle 3 x 3 leaves of angle

AS-615-i AS-615-e
AS-651-i AS-651-e

1 x 5 leaves of angle 1 x 5 leaves of angle

AS-835-i AS-835-e
AS-853-i AS-853-e

3 x 5 leaves of angle 3 x 5 leaves of angle

AS-1055-i AS-1055-e

5 x 5 leaves of angle 5 x 5 leaves of angle

Letters First number second number Third number Opening


DESIGN

Number of Leaves on the Leaves on the i = Insider


SEC-000051287 AS = Outward corner
leaves left right e = Outside

21 AMBIAL PW
AMBIAL PW
DESIGN

22
■■ Folding door 1 sash open in P.24
■■ Folding door 2 sash open out P.26
■■ 3 open out leaves P.28
■■ 4 open out leaves P.30
■■ 5 open out leaves P.32
■■ 5 open in leaves P.34
■■ 6 open out leaves P.36
■■ 8 open in leaves P.38
■■ 10 open out leaves P.40
■■ 2 open out corner leaves P.42
■■ 6 open out corner leaves P.44

DESIGN

23 AMBIAL PW
AMBIAL PW Applications

Folding door 1 sash open in


DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
2 || H-274 3Lx3/
T591006 19 mm glazing bead T1110 Weather bar clip
2 || L-221 ml
T730085 Cover profile 4 || H T750220 Corner cleat 4
TPW1103 Bottom frame 2 || L-82 T7977 M8 rod 1
TPW1108 Lateral outer frame 2 || H T930010 Rosette, 6mm 2
2 /\ H-148 T960023 Single lever handle 1
TPW1200 Sash 28 mm TPW3600 Corner cleat 28x15x18 8
2 /\ L-139
1 || H-104 TPW3704 European cylinder DIN 45/50 1
TPW1202 Locking vent rebate TPW3800 Locking points guide 2
1 || H-75
TPW2200 Rebate section 1 || L-139 TPW3802 Set of sealing parts 2
TPW2400 Gasket support section 3 || L-139 TPW3803 Weather tightness cap 1
TPW2401 Brush gasket support on frame 3 || L-83 TPW3804 Plugs for vent mullion 2
TPW2402 Outer frame rebate 1 || L-83 TPW3805 Plug set vent mullions 1
2 || L-18 TPW3806 Door vent frame plugs 1
TPW2403 Weather bar profile TPW3807 Set of caps 1
1 || L-139
TPW4000 Stainless steel track 4 || L-94 TPW3809 Frame plugs 4
TPW3810 End pieces weather bar 3
Gaskets Cutting TPW3811 Cramp 6
T410010 Multifunction gasket 4H+3L TPW3812 Guide 2
TAS0015 5 mm glazing gasket 2H+2L TPW3816 Glazing wedge support 4
TAS0509 Brush 13/7 5L TPW6005 Hinge 2
TPW5000 Vent gasket 4H TPW6010 Striker plate 1
TPW5003 Finish cover L TPW6011 Central hinge 1
TPW5005 Threshold gasket L TPW6012 3 locking point with shoot bolt 1
TPW6016 Strike set 1

Screws Qty
T770022 3Lx3/ml +4
T770072 5
TAY0002 16
TVE037 4 +2(H+L)x3/ml
TVE043 8

T960023
TPW1200

41 17 41 22
T730085 TPW1202

TPW3600
75

TVE037
16
121

TPW1108 TPW5000 T930010 8 32 41

143.9
SEC-000051279

24
Applications

Folding door 1 sash open in

TPW2401

TPW5003

TPW2402

137
Glazing
H-242
TPW2400
L-233
TPW2200

TPW6005
H

TPW6011

TPW6005

TAS0015

T591006
TVE037
TPW3816
63

TPW5005
TAS0509
27

TPW4000
47

TPW2403 TVE037 TPW1103


DESIGN

75

25 AMBIAL PW
AMBIAL PW Applications

Folding door 2 sash open out


DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
4 || H-294 2Lx3/
T591006 19 mm glazing bead T1110 Weather bar clip
4 || L/2-180 ml
T730085 Cover profile 2 H T3160 Drain cap 3
TPW1103 Bottom frame 1 || L-82 T750220 Corner cleat 8
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 2
TPW1110 Upper frame with rebate 1 || L-82 T930007 Door handle square pin 8 x 140 mm 1
4 /\ H-148 T930010 Rosette, 6mm 2
TPW1201 Reinforced vent section T960010 Double handle + rosette 1
4 /\ L/2-78
1 || H-104 TPW3601 Corner cleat 38x15x18 16
TPW1202 Locking vent rebate TPW3704 European cylinder DIN 45/50 1
1 || H-109
TPW2200 Rebate section 4 || L/2-78 TPW3800 Locking points guide 4
TPW2400 Gasket support section 4 || L/2-78 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame 1 || L-83 TPW3803 Weather tightness cap 2
TPW2402 Outer frame rebate 1 || L-83 TPW3804 Plugs for vent mullion 2
1 || L/2-78 TPW3805 Plug set vent mullions 2
TPW2403 Weather bar profile TPW3806 Door vent frame plugs 1
1 || L/2-48
TPW2405 Grooved brush gasket support on frame 1 || L-83 TPW3807 Set of caps 1
TPW2406 Top weather bar 1 || L-18 TPW3809 Frame plugs 4
TPW4000 Stainless steel track 2 || L-94 TPW3810 End pieces weather bar 3
TPW3811 Cramp 12
Gaskets Cutting TPW3812 Guide 4
T410010 Multifunction gasket 6H+4L TPW3816 Glazing wedge support 8
TAS0015 5 mm glazing gasket 4H+2L TPW6005 Hinge 4
TAS0509 Brush 13/7 3L TPW6010 Striker plate 1
TPW5000 Vent gasket 8H TPW6011 Central hinge 4
TPW5002 Central gasket 4H TPW6012 3 locking point with shoot bolt 1
TPW5003 Finish cover L TPW6016 Strike set 2
TPW5005 Threshold gasket L TPW6018 Bolt lock with lever 22 mm 1

Screws Qty
T770022 2Lx3/ml +4
T770072 5
TAY0002 32
TAY0056 3
TVE037 8 +(2H+L)x3/ml
TVE043 8
L

T960010 TPW5000 TPW3601

41 17 51 22 TPW1201
8 32 51
75

16 186
131
TVE037 TPW5002
TPW1108 TPW1202 T410010

SEC-000051280

26
Applications

Folding door 2 sash open out

TPW2406 TPW1110

TPW2401

147
Glazing
H-262 TPW2200
L/2-192
TPW2400

TPW1201

TPW6005

TPW6011
H

TPW6005
TAS0015

T591006
TPW3816

TVE037
73

TAS0509
TPW2405
TPW5005
TPW4000
11.5

TPW2402
37

TPW5003
T3160 TVE037 TPW1103
DESIGN

TPW5004 75

27 AMBIAL PW
AMBIAL PW Applications

3 open out leaves


DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
6 || H-274 2Lx3/
T591008 24 mm glazing bead T1110 Weather bar clip
6 || L/3-139,7 ml
T730085 Cover profile 8 || H T3160 Drain cap 4
TPW1103 Bottom frame 1 || L-82 T750220 Corner cleat 12
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 2
TPW1110 Upper frame with rebate 1 || L-82 T930007 Door handle square pin 8 x 140 mm 1
6 /\ H-148 T930010 Rosette, 6mm 2
TPW1200 Sash 28 mm T960010 Double handle + rosette 1
6 /\ L/3-57,7
1 || H-104 TPW3600 Corner cleat 28x15x18 24
TPW1202 Locking vent rebate TPW3704 European cylinder DIN 45/50 1
1 || H-75
TPW2200 Rebate section 6 || L/3-57,7 TPW3800 Locking points guide 4
TPW2400 Gasket support section 6 || L/3-57,7 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame 2 || L-83 TPW3803 Weather tightness cap 1
TPW2402 Outer frame rebate 1 || L-83 TPW3804 Plugs for vent mullion 6
1 || L-18 TPW3805 Plug set vent mullions 6
TPW2403 Weather bar profile 1 || L/3-27,7 TPW3806 Door vent frame plugs 1
2 || L/3-57,7 TPW3807 Set of caps 1
TPW4000 Stainless steel track 2 || L-94 TPW3809 Frame plugs 4
TPW3810 End pieces weather bar 4
Gaskets Cutting TPW3811 Cramp 18
T410010 Multifunction gasket 8H+4L TPW3812 Guide 4
TAS0016 6 mm glazing gasket 6H+2L TPW3813 Gear box adaptator 1
TAS0509 Brush 13/7 4L TPW3815 Supplementary plastic piece for puller 2
TPW5000 Vent gasket 12H TPW3816 Glazing wedge support 12
TPW5003 Finish cover L TPW3818 Cover piece for drainage 1
TPW5004 Bottom frame gasket L TPW6001 Lock 1
TPW6003 Top/bottom rolling set 1
Screws Qty
TPW6005 Hinge 4
T770022 2Lx3/ml +4
TPW6006 Pull handle 2
T770072 5
TPW6007 Magnetic holder 1
TAY0002 48
TPW6009 Technal handle 1
TAY0056 2
TPW6010 Striker plate 1
TPW3707 2
TPW6011 Central hinge 3
TPW3708 2
TPW6012 3 locking point with shoot bolt 1
TVE037 (2H+L)x3/ml +12
TPW6013 Magnetic holder, height 12.5mm 1
TVE043 8
TPW6014 Loop handle support 1
L
TPW6014
T960010 + TPW6006 TPW6009
TPW1200 TPW5000 TPW3600
41 32 8

143
TVE037
TPW1202 T410010 TPW6007 TPW6001

SEC-000048478

28
Applications

3 open out leaves

TPW1110

TPW2401

137
Glazing
H-242 TPW2200
L/3-151,7
TPW2400

TPW6005
TPW6011
TPW6003
H

TPW6011
TPW6006

TPW6003 TPW6005

TAS0016
TPW6013
T591008
22 41 17 41
TPW3816
63
75

TVE037
TAS0509
TPW4000
16
11.5

121 TPW2402
37

T730085 TPW1108 TPW5003

T3160 TVE037 TPW1103


DESIGN

TPW5004 75

29 AMBIAL PW
AMBIAL PW Applications

4 open out leaves


DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
8 || H-274 2Lx3/
T591008 24 mm glazing bead T1110 Weather bar clip
8 || L/4-129,5 ml
T730085 Cover profile 10 || H T3160 Drain cap 5
TPW1103 Bottom frame 1 || L-82 T750220 Corner cleat 16
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 3
TPW1110 Upper frame with rebate 1 || L-82 T930007 Door handle square pin 8 x 140 mm 1
8 /\ H-148 T930010 Rosette, 6mm 2
TPW1200 Sash 28 mm T960010 Double handle + rosette 1
8 /\ L/4-47,5
1 || H-109 TPW3600 Corner cleat 28x15x18 32
TPW1202 Locking vent rebate TPW3704 European cylinder DIN 45/50 1
1 || H-104
TPW2200 Rebate section 8 || L/4-47,5 TPW3800 Locking points guide 6
TPW2400 Gasket support section 8 || L/4-47,5 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame 2 || L-83 TPW3803 Weather tightness cap 2
TPW2402 Outer frame rebate 1 || L-83 TPW3804 Plugs for vent mullion 8
1 || L-18 TPW3805 Plug set vent mullions 8
TPW2403 Weather bar profile 1 || L/4-17,5 TPW3806 Door vent frame plugs 1
3 || L/4-47,5 TPW3807 Set of caps 1
TPW4000 Stainless steel track 2 || L-94 TPW3809 Frame plugs 4
TPW3810 End pieces weather bar 5
Gaskets Cutting TPW3811 Cramp 24
T410010 Multifunction gasket 10H+4L TPW3812 Guide 6
TAS0016 6 mm glazing gasket 8H+2L TPW3813 Gear box adaptator 2
TAS0509 Brush 13/7 4L TPW3815 Supplementary plastic piece for puller 2
TPW5000 Vent gasket 16H TPW3816 Glazing wedge support 16
TPW5003 Finish cover L TPW3818 Cover piece for drainage 1
TPW5004 Bottom frame gasket L TPW6001 Lock 1
TPW6003 Top/bottom rolling set 1
Screws Qty
TPW6005 Hinge 6
T770022 2Lx3/ml +4
TPW6006 Pull handle 2
T770072 5
TPW6009 Technal handle 1
TAY0002 64
TPW6010 Striker plate 1
TAY0056 4
TPW6011 Central hinge 4
TPW3707 4
TPW6012 3 locking point with shoot bolt 1
TVE037 (2H+L)x3/ml +16
TPW6013 Magnetic holder, height 12.5mm 2
TVE043 8
TPW6014 Loop handle support 1
TPW6018 Bolt lock with lever 22 mm 1

L
TPW6014
T960010 TPW6010 + TPW6006
TPW6018
TPW5000 T930007 TVE037 TPW3600
TPW3813
75

T770072
TPW1202 143
TPW6012
8 T410010
SEC-000048445
63 32 63
30
Applications

4 open out leaves

TPW1110

TPW2401

137
Glazing
H-242 TPW2200
L/4-141,5
TPW2400

TPW6005

TPW6003
H

TPW6011
TPW6006

TPW6003 TPW6005

TAS0016

T730085 TPW6009 TPW6013 T591008

22 41 17 41 TPW3816
63

TVE037
TAS0509
TPW4000
11.5

16 TPW2402
37

121
TPW5003
TPW6013 TPW6001 TPW1200 TPW1108 TVE037 TPW1103
T3160
DESIGN

TPW5004 75

31 AMBIAL PW
AMBIAL PW Applications

5 open out leaves


DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
10 || H-294 2Lx3/
T591006 19 mm glazing bead T1110 Weather bar clip
10 || L/5-151,4 ml
T730085 Cover profile 12 || H T3160 Drain cap 6
TPW1103 Bottom frame 1 || L-82 T750220 Corner cleat 20
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 3
TPW1110 Upper frame with rebate 1 || L-82 T930007 Door handle square pin 8 x 140 mm 1
10 /\ H-148 T930010 Rosette, 6mm 2
TPW1201 Reinforced vent section T960010 Double handle + rosette 1
10 /\ L/5-49.4
1 || H-104 TPW3601 Corner cleat 38x15x18 40
TPW1202 Locking vent rebate TPW3603 Adjustable jack for frame 12
1 || H-75
TPW1500 Adjustable frame adaptator 1 || H-76 TPW3704 European cylinder DIN 45/50 1
TPW2200 Rebate section 10 || L/5-49,4 TPW3800 Locking points guide 6
TPW2400 Gasket support section 10 || L/5-49,4 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame 2 || L-83 TPW3803 Weather tightness cap 1
TPW2402 Outer frame rebate 1 || L-83 TPW3804 Plugs for vent mullion 10
1 || L-18 TPW3805 Plug set vent mullions 10
TPW2403 Weather bar profile 4 || L/5-49,4 TPW3806 Door vent frame plugs 1
1 || L/5-19,4 TPW3807 Set of caps 1
1 || H-75 TPW3809 Frame plugs 4
TPW2404 Adjustment frame mullion profile TPW3810 End pieces weather bar 6
1 || H-95
TPW4000 Stainless steel track 2 || L-94 TPW3811 Cramp 30
TPW3812 Guide 6
Gaskets Cutting TPW3813 Gear box adaptator 2
T1311 Weatherpile gasket 2H TPW3815 Supplementary plastic piece for puller 3
T410010 Multifunction gasket 12H+4L TPW3816 Glazing wedge support 20
TAS0015 5 mm glazing gasket 10H+2L TPW3817 Adjustable frame profile caps 1
TAS0509 Brush 13/7 4L TPW3818 Cover piece for drainage 2
TPW5000 Vent gasket 20H TPW6001 Lock 2
TPW5003 Finish cover L TPW6003 Top/bottom rolling set 2
TPW5004 Bottom frame gasket L TPW6005 Hinge 6
TPW6006 Pull handle 3
Screws Qty
TPW6007 Magnetic holder 1
T770022 2Lx3/ml +4
TPW6009 Technal handle 2
T770072 5
TPW6010 Striker plate 1
TAY0002 80
TPW6011 Central hinge 5
TAY0056 4
TPW6012 3 locking point with shoot bolt 1
TPW3707 4
TPW6013 Magnetic holder, height 12.5mm 3
TPW3708 2
TPW6014 Loop handle support 1
TVE037 (2H+L)x3/ml +22
TVE043 8 TPW6014
+ TPW6006
+ TPW3815 L

TPW6013
41 32 8
TPW6006
75

TVE037
TPW1202 T960010
SEC-000048474 T750220 TPW6007

32
Applications

5 open out leaves

37
TPW1110

37
147
TPW2200
TPW2400

73
Glazing
H-262
L/5-163,4
TPW6005

TPW6003

TPW6006
TPW6011

TPW6003

TAS0015

T591006
TPW3816
73

TVE037
TPW2401
TPW5004
27

TAS0509 TPW4000
T3160 TVE037
47

TPW1103

TPW3603 TPW2404
TPW3601 TPW6009
TPW1500 TPW1108
T730085

163 40 41
T410010 TPW6001 TPW1201
DESIGN

TPW5000 T1311

33 AMBIAL PW
AMBIAL PW Applications

5 open in leaves
DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
10 || H-294 2Lx3/
T591006 19 mm glazing bead T1110 Weather bar clip
10 || L/5-151,4 ml
T730085 Cover profile 12 || H T3160 Drain cap 6
TPW1103 Bottom frame 1 || L-82 T750220 Corner cleat 20
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 3
TPW1110 Upper frame with rebate 1 || L-82 T930007 Door handle square pin 8 x 140 mm 1
10 /\ H-148 T930010 Rosette, 6mm 2
TPW1201 Reinforced vent section T960010 Double handle + rosette 1
10 /\ L/5-49,4
1 || H-104 TPW3601 Corner cleat 38x15x18 40
TPW1202 Locking vent rebate TPW3603 Adjustable jack for frame 12
1 || H-75
TPW1500 Adjustable frame adaptator 1 || H- 76 TPW3704 European cylinder DIN 45/50 1
TPW2200 Rebate section 10 || L/5-49,4 TPW3800 Locking points guide 6
TPW2400 Gasket support section 10 || L/5-49,4 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame 2 || L-83 TPW3803 Weather tightness cap 1
TPW2402 Outer frame rebate 1 || L-83 TPW3804 Plugs for vent mullion 10
1 || L-18 TPW3805 Plug set vent mullions 10
TPW2403 Weather bar profile TPW3806 Door vent frame plugs 1
5 || L/5-49,4
1 || H- 75 TPW3807 Set of caps 1
TPW2404 Adjustment frame mullion profile TPW3809 Frame plugs 4
1 || H- 95
TPW4000 Stainless steel track 2 || L-94 TPW3810 End pieces weather bar 6
TPW3811 Cramp 30
Gaskets Cutting TPW3812 Guide 6
T1311 Weatherpile gasket 2H TPW3813 Gear box adaptator 2
T410010 Multifunction gasket 12H+4L TPW3815 Supplementary plastic piece for puller 1
TAS0015 5 mm glazing gasket 10H+2L TPW3816 Glazing wedge support 20
TAS0509 Brush 13/7 4L TPW3817 Adjustable frame profile caps 1
TPW5000 Vent gasket 20H TPW3818 Cover piece for drainage 2
TPW5003 Finish cover L TPW6001 Lock 2
TPW5004 Bottom frame gasket L TPW6003 Top/bottom rolling set 2
TPW6005 Hinge 6
Screws Qty
TPW6006 Pull handle 1
T770022 2Lx3/ml +4
TPW6007 Magnetic holder 1
T770072 5
TPW6009 Technal handle 2
TAY0002 80
TPW6010 Striker plate 1
TAY0056 4
TPW6011 Central hinge 5
TPW3707 4
TPW6012 3 locking point with shoot bolt 1
TPW3708 2
TPW6013 Magnetic holder, height 12.5mm 3
TVE037 (2H+L)x3/ml +22
TPW6014 Loop handle support 1
TVE043 8

TPW1202 TPW6007 TPW6009


75

41 32 8 T960010 TPW6014
TPW6001
+ TPW6006
SEC-000048472 + TPW3815 T750220

34
Applications

5 open in leaves

37
TPW1110

37
TPW2401

147
TPW2400
TPW2200

73
Glazing
H-262
L/5-163,4

TPW6003

TPW6005
TPW6011

H TPW6011

TPW6005

TAS0015

T591006
TPW3816
73

TVE037

TPW5003
27

TAS0509
TPW2402
TPW4000
47

T3160 TPW1103

TPW5004 TPW3603 TPW2404


TPW3601 TPW5000
T730085 TPW1500 TPW1108
TPW6013

163 40 41
T410010 TPW1201
DESIGN

TPW6005 + TPW6011 T1311

35 AMBIAL PW
AMBIAL PW Applications

6 open out leaves


DESIGN

*** see design chart


Profiles Qty Cutting Accessories Qty
12 || H-294 2L x
T591006 19 mm glazing bead T1110 Weather bar clip
12 || L/6-146 3/ml
T730085 Cover profile 14 || H T3160 Drain cap 7
TPW1103 Bottom frame 1 || L-82 T750220 Corner cleat 24
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 4
TPW1110 Upper frame with rebate 1 || L-82 T930007 Door handle square pin 8 x 140 mm 1
12 /\ H-148 T930010 Rosette, 6mm 2
TPW1201 Reinforced vent section T960010 Double handle + rosette 1
12 /\ L/6-44
1 || H-104 TPW3601 Corner cleat 38x15x18 48
TPW1202 Locking vent rebate TPW3603 Adjustable jack for frame 12
1 || H-109
TPW1500 Adjustable frame adaptator 1 || H-76 TPW3704 European cylinder DIN 45/50 1
TPW2200 Rebate section 12 || L/6-44 TPW3800 Locking points guide 8
TPW2400 Gasket support section 12 || L/6-44 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame 2 || L-83 TPW3803 Weather tightness cap 2
TPW2402 Outer frame rebate 1 || L-83 TPW3804 Plugs for vent mullion 12
1 || L-18 TPW3805 Plug set vent mullions 12
TPW2403 Weather bar profile 1 || L/6-14 TPW3806 Door vent frame plugs 1
5 || L/6-44 TPW3807 Set of caps 1
1 || H-75 TPW3809 Frame plugs 4
TPW2404 Adjustment frame mullion profile TPW3810 End pieces weather bar 7
1 || H-95
TPW4000 Stainless steel track 2 || L-94 TPW3811 Cramp 36
TPW3812 Guide 8
Gaskets Cutting TPW3813 Gear box adaptator 3
T1311 Weatherpile gasket 2H TPW3815 Supplementary plastic piece for puller 4
T410010 Multifunction gasket 14H+4L TPW3816 Glazing wedge support 24
TAS0015 5 mm glazing gasket 12H+2L TPW3817 Adjustable frame profile caps 1
TAS0509 Brush 13/7 4L TPW3818 Cover piece for drainage 2
TPW5000 Vent gasket 24H TPW6001 Lock 2
TPW5003 Finish cover L TPW6003 Top/bottom rolling set 2
TPW5004 Bottom frame gasket L TPW6005 Hinge 8
TPW6006 Pull handle 4
Screws Qty
TPW6007 Magnetic holder 1
T770022 2L x 3/ml +4
TPW6009 Technal handle 2
T770072 5
TPW6010 Striker plate 1
TAY0002 96
TPW6011 Central hinge 6
TAY0056 6
TPW6012 3 locking point with shoot bolt 1
TPW3707 6
TPW6013 Magnetic holder, height 12.5mm 3
TPW3708 2
TPW6014 Loop handle support 2
TVE037 (2H+L)x3/ml+30
TPW6018 Bolt lock with lever 22 mm 1
TVE043 8
L
TPW6006 + TPW3815 TPW6014
+ TPW6006
41 17 51 TPW6009 TPW3601
+ TPW3815
75

TFY6010
163
SEC-000048534 TPW6007 T750220

36
Applications

6 open out leaves

37
TPW1110

TPW2400

37
TPW2200
TPW6005

73
Glazing
H-262
L/6-158

TPW6003
TPW6006

H TPW6011

TPW6003
TPW6014
+ TPW6006
+TPW3815 TPW6011
TAS0015

T591006
TFY3816
73

TVE037

TPW2401
27

TAS0509
T3160 TPW2402
TPW4000
47

TPW1103

T960010 TPW6006 TPW5004 TPW1500 TPW2404


+ TPW3815 TPW1108
T730085

5
TPW5000 40 41
TPW1202 TPW1201
DESIGN

T410010 T1311

37 AMBIAL PW
AMBIAL PW Applications

8 open in leaves
DESIGN

Profiles Qty Cutting Accessories Qty

*** see design chart


16 || H-294 2L x
T591006 19 mm glazing bead T1110 Weather bar clip
16 || L/8-139.3 3/ml
T730085 Cover profile 18 || H T3160 Drain cap 9
1 || 5/8L-41 T750220 Corner cleat 32
TPW1103 Bottom frame T7977 M8 rod 5
1 || 3/8L-41
TPW1108 Lateral outer frame 2 || H T930007 Door handle square pin 8 x 140 mm 1
1 || 5/8L-41 T930010 Rosette, 6mm 2
TPW1110 Upper frame with rebate T960010 Double handle + rosette 1
1 || 3/8L-41
16 /\ H-148 TPW3601 Corner cleat 38x15x18 64
TPW1201 Reinforced vent section TPW3602 Transom connector 2
16 /\ L/8-37.3
1 || H-104 TPW3603 Adjustable jack for frame 12
TPW1202 Locking vent rebate TPW3704 European cylinder DIN 45/50 1
1 || H-106.5
TPW1500 Adjustable frame adaptator 1 || H-76 TPW3800 Locking points guide 10
TPW2200 Rebate section 8 || L/8-37.3 TPW3802 Set of sealing parts 2
TPW2400 Gasket support section 24 || L/8-37.3 TPW3803 Weather tightness cap 2
1 || 3/8L+59 TPW3804 Plugs for vent mullion 24
2 || 5/8L+59 TPW3805 Plug set vent mullions 8
TPW2401 Brush gasket support on frame TPW3806 Door vent frame plugs 2
1 || 5/8L-142
2 || 3/8L-142 TPW3807 Set of caps 1
2 || L/2-9 TPW3809 Frame plugs 4
TPW2403 Weather bar profile 1 || L/8-7.3 TPW3810 End pieces weather bar 9
7 || L/8-37.3 TPW3811 Cramp 48
1 || H-75 TPW3812 Guide 10
TPW2404 Adjustment frame mullion profile TPW3813 Gear box adaptator 4
1 || H-85
2 || L/2+53 TPW3815 Supplementary plastic piece for puller 2
TPW4000 Stainless steel track TPW3816 Glazing wedge support 32
2 || L/2-147
TPW3817 Adjustable frame profile caps 1
Gaskets Cutting
TPW3818 Cover piece for drainage 3
T1311 Weatherpile gasket 2H
TPW6001 Lock 3
T410010 Multifunction gasket 18H+3L
TPW6003 Top/bottom rolling set 3
TAS0015 5 mm glazing gasket 18H+2L
TPW6005 Hinge 10
TAS0509 Brush 13/7 5L
TPW6006 Pull handle 2
TPW5000 Vent gasket 32H
TPW6007 Magnetic holder 1
TPW5004 Bottom frame gasket L
TPW6009 Technal handle 3
Screws Qty TPW6010 Striker plate 1
T770022 2L x 3/ml +4 TPW6011 Central hinge 8
T770072 5 TPW6012 3 locking point with shoot bolt 1
TAY0002 128 TPW6013 Magnetic holder, height 12.5mm 5
TAY0056 7 TPW6014 Loop handle support 2
TPW3707 8 TPW6018 Bolt lock with lever 22 mm 1
TPW3708 2
TVE037 2H x 3/ml +38
TVE043 8 L
TPW6007 TPW3601
TPW6009
T410010
75

41 17 51 163 TPW6014
SEC-000049139 + TPW6006
T750220 + TPW3815
38
Applications

8 open in leaves

37
TPW1110

TPW2400

37
TPW2200

TPW6003
1

73
TPW6014
+ TPW6006
TPW6005
+ TPW3815
TPW6006

2
H

TPW6011

TAS0015

T591006
TFY3816
3
73

TVE037

TPW2400
27

TAS0509
Glazing
H-262 TPW2401
T3160
L/8-151.2 TPW4000
47

1 2 3
TPW1103

T960010 TPW5004 TPW1500


TPW5000 TPW1108
T730085

5
40 41
TPW1202 TPW1201 T1311
DESIGN

TPW2404

39 AMBIAL PW
AMBIAL PW Applications

10 open out leaves


DESIGN

Profiles Qty Cutting Accessories Qty

*** see design chart


20 || H-294 2Lx3/
T591006 19 mm glazing bead T1110 Weather bar clip
20 | | L/10-135,2 ml
T730085 Cover profile 22 || H T3160 Drain cap 11
TPW1103 Bottom frame 2 || L/2-41 T750220 Corner cleat 40
TPW1108 Lateral outer frame 2 || H T7977 M8 rod 6
TPW1110 Upper frame with rebate 2 || L/2-41 T930007 Door handle square pin 8 x 140 mm 1
20 /\ H-148 T930010 Rosette, 6mm 2
TPW1201 Reinforced vent section T960010 Double handle + rosette 1
20 /\ L/10-33,2
1 || H-104 TPW3601 Corner cleat 38x15x18 80
TPW1202 Locking vent rebate TPW3602 Transom connector 2
1 || H-106.5
TPW1500 Adjustable frame adaptator 1 || H-76 TPW3603 Adjustable jack for frame 12
TPW2200 Rebate section 10 || L/10-33,2 TPW3704 European cylinder DIN 45/50 1
TPW2400 Gasket support section 30 || L/10-33,2 TPW3800 Locking points guide 12
3 || L/2+59 TPW3802 Set of sealing parts 2
TPW2401 Brush gasket support on frame TPW3803 Weather tightness cap 2
3 || L/2-142
1 || L/2-9 TPW3804 Plugs for vent mullion 30
TPW2403 Weather bar profile 1 || L/10-3,2 TPW3805 Plug set vent mullions 10
9 || L/10-33,2 TPW3806 Door vent frame plugs 2
1 || H-75 TPW3807 Set of caps 1
TPW2404 Adjustment frame mullion profile TPW3809 Frame plugs 4
1 || H-85
2 || L/2+53 TPW3810 End pieces weather bar 11
TPW4000 Stainless steel track TPW3811 Cramp 60
2 || L/2-147
TPW3812 Guide 12
Gaskets Cutting TPW3813 Gear box adaptator 5
T1311 Weatherpile gasket 2H TPW3815 Supplementary plastic piece for puller 6
T410010 Multifunction gasket 22H+3L TPW3816 Glazing wedge support 40
TAS0015 5 mm glazing gasket 20H+2L TPW3817 Adjustable frame profile caps 1
TAS0509 Brush 13/7 5L TPW3818 Cover piece for drainage 4
TPW5000 Vent gasket 40H TPW6001 Lock 4
TPW5004 Bottom frame gasket L TPW6003 Top/bottom rolling set 4
TPW6005 Hinge 12
Screws Qty
TPW6006 Pull handle 6
T770022 2Lx3/ml +4
TPW6007 Magnetic holder 1
T770072 5
TPW6009 Technal handle 4
TAY0002 160
TPW6010 Striker plate 1
TAY0056 8
TPW6011 Central hinge 10
TPW3707 10
TPW6012 3 locking point with shoot bolt 1
TPW3708 2
TPW6013 Magnetic holder, height 12.5mm 7
TVE037 2Hx3/ml+46
TPW6014 Loop handle support 2
TVE043 8
TPW6018 Bolt lock with lever 22 mm 1

3 4 L
TPW6014 + TPW6006
+ TPW3815 TPW3601
41 17 51 TPW6009
75

SEC-000049141 TPW6001 T750220

40
Applications

10 open out leaves

37
TPW1110

TPW2400

37
TPW2200
1 TPW6005

73
TPW6003
TPW6006
2

H TPW6011

TPW6003
3
TPW6011
TAS0015

T591006
TFY3816

4
73

TVE037
TPW2400
TAS0509
27

TPW2401
T3160
TPW4000
47

Glazing 1 2 3 TPW1103
H-262
L/10-147,2
TPW5004 TPW1500 TPW2404
TPW1108
T730085

5
TPW5000 40 41
TPW1202 TPW6013 TPW1201
DESIGN

T960010 T410010 T1311

41 AMBIAL PW
AMBIAL PW Applications

2 open out corner leaves


DESIGN

Accessories Qty

*** see design chart


2(L1+L2) x
T1110 Weather bar clip
3/ml
T3160 Drain cap 4
T750220 Corner cleat 8
T7977 M8 rod 2
Gaskets Cutting T930010 Rosette, 6mm 2

T1311 Weatherpile gasket 4H T960023 Single lever handle 1

T190259 Gap infill gasket H TPW3600 Corner cleat 28x15x18 16

T410010 Multifunction gasket 6H+3(L1+L2) TPW3603 Adjustable jack for frame 32

TAS0015 5 mm glazing gasket 4H+2(L1+L2) TPW3604 Alignement corner cleat set 1

TAS0509 Brush 13/7 5(L1+L2) TPW3605 Corner post set 1

TPW5000 Vent gasket 8H TPW3606 Corner finishion set Nº1 1

TPW5002 Central gasket 4H TPW3704 European cylinder DIN 45/50 1

TPW5003 Finish cover L1+L2 TPW3800 Locking points guide 2

TPW5005 Threshold gasket L1+L2 TPW3802 Set of sealing parts 2


TPW3803 Weather tightness cap 2
TPW3804 Plugs for vent mullion 3
TPW3805 Plug set vent mullions 1
TPW3806 Door vent frame plugs 2
TPW3807 Set of caps 1
TPW3809 Frame plugs 4
TPW3810 End pieces weather bar 3
TPW3811 Cramp 12
TPW3812 Guide 4
TPW3816 Glazing wedge support 8
TPW3817 Adjustable frame profile caps 2
TPW6005 Hinge 4
TPW1200 TPW6010 Striker plate 1
TPW6011 Central hinge 4
TPW6012 3 locking point with shoot bolt 1
T960023
TPW6016 Strike set 2
TPW6018 Bolt lock with lever 22 mm 1

Screws Qty
T770022 2(L1+L2) x 3/ml +4
T770072 5
T770082 Hx3/ml
T930010
TAY0002 32
L1

TPW3707 4
TVE037 (4H+L1+L2)x3/ml + 20
TVE043 8
TPW1202

TPW6018
TPW1500 TPW2404
TPW1203 TPW1108
T730085
TPW5000
T134026
93

75

T770082 156 T1311


L2
SEC-000051282 TPW2201 T190259 TVE037 TPW5002
42
Applications

2 open out corner leaves

TPW2403

Glazing Glazing
H-242 H-242
L1 -325 L2 -285 TPW1103

TPW2401

137
Profiles Qty Cutting
TPW2200
T134026 Minimal coupling profile 5 || 100
TPW2400
4 || H-274
T591006 19 mm glazing bead 2 || L1-313
2 || L2-273
T730085 Cover profile 2 || H
1 |\ L1 -41
1 |\ L2 -41
TPW1103 Bottom frame
1 |\ L1 -41 TPW6005
1 |\ L2 -41
TPW1108 Lateral outer frame 2 || H
4 /\ H-148
TPW1200 Sash 28 mm 2 /\ L1-231
2 /\ L2-191
1 || H-104
TPW1202 Locking vent rebate
1 || H-106.5
TPW1203 Corner post 1 || H-160
TPW1500 Adjustable frame adaptator 2 || H-76
1 || L1-231
TPW2200 Rebate section
1 || L2-191
TPW6011
H

TPW2201 Corner post cover 1 || H-160


3 || L1-231
TPW2400 Gasket support section
3 || L2-191
1 |\ L1 -41.5
1 |\ L2 -41.5
1 |\ L1 -41.5
TPW2401 Brush gasket support on frame
1 |\ L2 -41.5
1 |\ L1 -98.7
1 |\ L2 -98.7
1 |\ L1-97.4 TPW6005
TPW2402 Outer frame rebate
1 |\ L2-97.4
TAS0015
1 |\ L1
1 || L1-199 T591006
TPW2403 Weather bar profile 1 |\ 102
TPW3816
1 |\ L2
1 |\ L2-89 TPW3811
2 || H-75
63

TPW2404 Adjustment frame mullion profile


2 || H-85 TVE037
2 |\ L1-69
TAS0509
2 |\ L2-69
TPW4000 Stainless steel track
2 |\ L1-95.5 TPW4000
11.5

2 |\ L2.95.5
37

T3160 TVE037 TPW1103


DESIGN

TPW5005 75

43 AMBIAL PW
AMBIAL PW Applications

6 open out corner leaves


DESIGN

Profiles Qty Cutting

*** see design chart


T134026 Minimal coupling profile 5 || 100

12 || H-274
T591006 19 mm glazing bead 6 | | L1 /3-170.3
6 || L2 /3-157
T730085 Cover profile 14 || H
1 |\ L1 -41
TPW1103 Bottom frame
TPW6013 1 |\ L2 -41
TPW1108 Lateral outer frame 2 || H
TPW6002 1 |\ L1 -41
+ TPW6019 TPW1110 Upper frame with rebate
1 |\ L2 -41
12 /\ H-148
TPW1200 Sash 28 mm 6 /\ L1 /3-88.3
6 /\ L2 /3-75
1 || H-104
TPW1202 Locking vent rebate
1 || H-106.5
TPW1203 Corner post 1 || H-160
TPW1500 Adjustable frame adaptator 2 || H-76
3 || L1 /3-88.3
TPW2200 Rebate section
3 || L2 /3-75
TPW2201 Corner post cover 1 || H-160
9 || L1 /3-88.3
TPW2400 Gasket support section
TPW1200 9 || L2 /3-75
1 |\ L1 -41.5
L1

1 |\ L2 -41.5
1 |\ L1 -41.5
TPW2401 Brush gasket support on frame
1 |\ L2 -41.5
1 |\ L1 -98.7
1 |\ L2 -98.7
2 || L1 /3-88.3
T960010 1 || L1 /3-56.3
TPW2403 Weather bar profile 1 |\ 102
1 |\ L2 /3+27
2 || L2 /3-75
2 || H-75
TPW2404 Adjustment frame mullion profile
2 || H-85
1 |\ L2
TPW2406 Top weather bar
1 |\ L1
1 |\ L1-95.5
1 |\ L2-95.5
TPW4000 Stainless steel track
1 |\ L1-69
1 |\ L2-69

TPW1202
TPW6018 TPW6014
TPW1203 + TPW6006
T134026 + TPW3815
93

T770082 156
L2
SEC-000051278 TPW2201 T190259 TVE037 T410010
44
Applications

6 open out corner leaves


TPW2406

Glazing Glazing
H-242 H-242
L1 /3-182.3 L2 /3-169

Accessories Qty Accessories Qty


2(L1+L2) TPW6002 Technal handle with key 2
T1110 Weather bar clip
x 3/ml TPW6003 Top/bottom rolling set 2
T3160 Drain cap 10 TPW6005 Hinge 8
T750220 Corner cleat 24 TPW6006 Pull handle 4
T7977 M8 rod 4 TPW6007 Magnetic holder 1
Door handle square pin 8 x 140 TPW6010 Striker plate 1
T930007 1
mm
TPW6011 Central hinge 12
T930010 Rosette, 6mm 2
TPW6012 3 locking point with shoot bolt 1
T960010 Double handle + rosette 1
TPW6013 Magnetic holder, height 12.5mm 3
TPW3600 Corner cleat 28x15x18 48
TPW6014 Loop handle support 2
TPW3603 Adjustable jack for frame 32
TPW6016 Strike set 2
TPW3604 Alignement corner cleat set 1
TPW6018 Bolt lock with lever 22 mm 1
TPW3605 Corner post set 1
TPW6019 Half cylinder 45 Technal 2
TPW3606 Corner finishion set Nº1 1
TPW3704 European cylinder DIN 45/50 1 Screws Qty
TPW3800 Locking points guide 6
T770022 2(L1+L2) x 3/ml +4
TPW3802 Set of sealing parts 2
T770072 5
TPW3803 Weather tightness cap 2
T770082 Hx3/ml
TPW3804 Plugs for vent mullion 18

H
TAY0002 96
TPW3805 Plug set vent mullions 6
TAY0056 4
TPW3806 Door vent frame plugs 1
TPW3707 4
TPW3807 Set of caps 1
TPW3708 2
TPW3809 Frame plugs 4
TVE037 4Hx3/ml + 40
TPW3810 End pieces weather bar 7
TVE043 8
TPW3811 Cramp 36
TPW3812 Guide 8 Gaskets Cutting
TPW3813 Gear box adaptator 2 T1311 Weatherpile gasket 4H
Supplementary plastic piece for T190259 Gap infill gasket H
TPW3815 4
puller T410010 Multifunction gasket 14H+4(L1+L2)
TPW3816 Glazing wedge support 24 TAS0015 5 mm glazing gasket 12H+2(L1+L2)
TPW3817 Adjustable frame profile caps 2 TAS0509 Brush 13/7 4(L1+L2)
TPW3818 Cover piece for drainage 2 TPW5000 Vent gasket 24H
TPW6001 Lock 2 TPW5004 Bottom frame gasket L1+L2

TPW2404
TPW1500 TPW1108
TPW3600 T730085
75

5 TVE037
40 41 T1311 75
TPW6013 TPW5000 TPW1200
DESIGN

45 AMBIAL PW
AMBIAL PW Options

Magnetic end stops assembly


DESIGN

Use of large end stop


TPW6007 in case of leaf
with handle.

TPW3708

TPW6007

TAY0056

TPW6013

SEC-000049134

46
Options

Drainage principal

Open Out Open Out or Open In

Open In

TPW5004
DESIGN

SEC-000048544

47 AMBIAL PW
AMBIAL PW Options

Main concealed drainage


DESIGN

Open Out

TPW2403 Open In

T1110 +
T770022

SEC-000051295

48
Options

Rebate thresholds application

Open Out

TPW2400
TPW2403 TPW1200
or TPW1201
H

TPW2200
137

23.2

4.5
TAS0509 TPW2402
TPW2401

20

74
50.8

TPW5003

TVE037
T3160

TPW1103

Open In

TPW1200
TPW2200 or TPW1201

TVE037

TPW2400
H

137

TPW2403
25.5

4.5
TPW2402
20
74

TAS0509
48.5

TPW5003
TPW2401

T3160 TPW1103
DESIGN

SEC-000048553

49 AMBIAL PW
AMBIAL PW Options

Flat thresholds application


DESIGN

Open Out

TPW2400
TPW2403 TPW1200
or TPW1201
H

TPW2400
137

23.2

TAS0509
TPW2401
50.8

TPW2401

T3160

TPW1103

Open In

TPW1200
or TPW1201

TPW2400 TVE037

TPW2400
137
H

TPW2403
25.5

TAS0509
48.5

TPW2401

T3160 TPW1103

SEC-000048554

50
Options

Flat thresholds application

Open Out

TPW2400
TPW2403 TPW1200
or TPW1201
H

TPW2400
137

23.2

TAS0509
TPW2405
50.8

TPW2405

T3160

TPW1103

Open In

TPW1200
or TPW1201

TPW2400 TVE037

TPW2400
137
H

TPW2403
25.5

TAS0509
48.5

TPW2405

T3160 TPW1103
DESIGN

SEC-000050710

51 AMBIAL PW
AMBIAL PW Options

Rebate low thresholds application


DESIGN

Open Out

TPW2400
TPW1200
TPW2403
or TPW1201

TPW2200
H

TAS0509
6.5
137

23.2

11.5
TPW2402

20

74
50.8

45
TPW2401

TPW1103 TPW5004 TVE037 TPW5003

Drainage according
to installation.
Open In

TPW1200
or TPW1201
TPW2200
TVE037
TPW2403
TPW2400
137
H

4 11.5
25.5

TPW2402

TAS0509
20
74

48.5
35

TPW5003

TPW1103 TPW5004 TPW2401


Drainage according
to installation.
SEC-000048538

52
Options

Flat low thresholds application

Open Out

TPW2400
TPW2403 TPW1200
or TPW1201
H

TPW2400
137

23.2

11.5

TAS0509
50.8

35
TPW2401

TPW1103 TPW5004

Drainage according
to installation.
Open In

TPW1200
or TPW1201
TPW2400
TVE037

TPW2400
137
H

TPW2403

TAS0509
TPW2401

11.5
37

TPW1103 TPW5004
Drainage according
to installation.
DESIGN

SEC-000048540

53 AMBIAL PW
AMBIAL PW Options

Top frame rebate


DESIGN

■ Open In or open out

TPW1107

TPW2401

TVE037

TPW2402

TPW5003

SEC-000048586

54
Options

Bottom rail finishing gasket and grooved


brush gasket support

TPW5004

TPW2401

TPW5004

TPW2405
DESIGN

SEC-000048587

55 AMBIAL PW
AMBIAL PW Options

Bottom rail finishing gasket


DESIGN

TPW6016
Option

Option

TPW5005

TPW5005

SEC-000051442

56
Options

Frame weather bar

■ Open In exposed site

TPW2403

T770022

T1110

TAS0509 TPW2402

■ Variante

TPW2406

T770022

T1110

TPW2402
DESIGN

SEC-000048588

57 AMBIAL PW
AMBIAL PW Options

Leaf weather bar


DESIGN

■ Open out exposed site

TPW2403

T770022

T1110

TAS0509 TPW2400

SEC-000048589

58
Options

Leaf added weather bar

■ Open In exposed site

TPW2403

T770022

T1110

TPW2200
DESIGN

SEC-000048590

59 AMBIAL PW
AMBIAL PW Options

Variant of the glazing gasket


DESIGN

■ Verticaly beaded

T4010003

T4010003

T4010003

T4010003

SEC-000051397

60
Options

Variant of the rebate gasket

T710041

T710041

T710041 T710041
DESIGN

SEC-000051398

61 AMBIAL PW
AMBIAL PW Options

Adjustable frame mullion


DESIGN

TPW3817

TPW1108
TPW1102

TVE037

TPW1500

TPW3603 TPW3817

TPW2404
TPW5000

T1311

SEC-000048585 ±5

62
Options

Central gasket

TPW5002 TPW5002
■ Frame node

■ Gear box node


TPW5002

TPW5002

■ Bogie node
DESIGN

SEC-000048591

63 AMBIAL PW
AMBIAL PW Options

Thermal insulation foam


DESIGN

■ Thermal gasket on leaf

T790002

TPW1200
TPW1201

■ Thermal gasket on transom

TFY1302

T790003

SEC-000048703

64
Options

Leaf transom

Accessories
Transom sections
Transoms Frames Infills
leaf References Designation Qty

h1 - 73
TPW1200 Lv - 82 T760005 Spigot 28x13,7 2
h2 - 73
T760206 Anti-skewing device 2
TFY1301
T770022 Screw TFX 4,2x13 8
h1 - 83 TAY0000 6x10 mm pin 4
TPW1201 Lv - 102
h2 - 83

h1 - 78
TPW1200 Lv - 82 T760006 Spigot 38x13,7 2
h2 - 78
T760206 Anti-skewing device 2
TFY1302
T770022 Screw TFX 4,2x13 8
h1 - 88 TAY0000 6x10 mm pin 4
TPW1201 Lv - 102
h2 - 88

h1 - 93
TPW1200 Lv - 82 T760009 Spigot 68x13,7 2
h2 - 93
T760206 Anti-skewing device 2
TFY1303
T770022 Screw TFX 4,2x13 8
h1 - 103 TAY0000 6x10 mm pin 4
TPW1201 Lv - 102
h2 - 103

h1 - 108
TPW1200 Lv - 82 T760012 Spigot 98x13,7 2
h2 - 108
T760206 Anti-skewing device 2
TFY1304
T770022 Screw TFX 4,2x13 8
h1 - 118 TAY0000 6x10 mm pin 4
TPW1201 Lv - 102
h2 - 118

h1 - 128
TPW1200 Lv - 82 T760004 Spigot 18x13,7 4
h2 - 128
T760206 Anti-skewing device 2
TFY1305
T770022 Screw TFX 4,2x13 8
h1 - 128 TAY0000 6x10 mm pin 4
TPW1201 Lv - 102
h2 - 128

26

TFY1302

TFY3807
ht2

T770022
ht1

T760206
T760006
TAY0000

65
DESIGN

SEC-000048595

65 AMBIAL PW
AMBIAL PW Options

Intermediate transom: Infill dimensions


DESIGN

Transom with infill 9 - 52mm

Example:

74
Infill sections
for transom
TFY1302 with
leaf TPW1200
47 h1 = H - ht2 - 152
h2 = H - ht1 - 152
ht2

h2
H

31

50
31

TFY1302
h1
ht1

47
74

SEC-000048550

66
Options

Choice of tools

Frame Sash

Punching tipping
Cassette TPW7000
leaf angles

Passage punching
lock finger Cassette TPW7001

Rebate punching
Cassette TPW7002
lock mullion

Punching of profiles
Cassette TPW7003
added to leaf transoms

Punching frame mullions Cassette TPW7004

Punching hinges TPW6005 Drill jig TPW7005 TPW7005

Drilling of frame drainage Drill jig TPW7006

Frame drill jig adjustable Drill jig TPW7007

Punching drainage for rail support Cassette TPW7008

Step drill after sales TPW7007 Step drill TPW7009

Drill jig for junction of


transom frame Drill jig TPW7010
DESIGN

SEC-000048597

67 AMBIAL PW
AMBIAL PW Options

Choice of corner-cleats and end caps


DESIGN

Corner cleats
Ref. Description Hollow Spigot splice bar
Crimping Pinning
TPW1100 Bottom outer frame 9.8 x 21 - TPW3604 - TPW3602
TPW1101 Top outer frame 9.8 x 21 - TPW3604 - TPW3602
TPW1103 Bottom frame 9.8 x 21 - TPW3604 - TPW3602
TPW1107 Top outer frame 9.8 x 21 - TPW3604 - TPW3602
TPW1110 Bottom outer frame 9.8 x 21 - TPW3604 - TPW3602
TPW1200 opening frame 18 x 28 TPW3600 -
TPW1201 opening frame 18 x 38 TPW3601 -
T760005 /
TFY1301 Transom 28 / 90 28 x 13,7 -
TFY3646
T760006 /
TFY1302 38 x 13,7 -
Transom 38 / 100 TFY3646
T760009 /
TFY1303 68 x 13,7 -
Transom 68 / 130 TFY3646
T760012 /
TFY1304 98 x 13,7 -
Transom 98 / 160 TFY3646
T760004 /
TFY1305 Transom 150 / 200 18 x 13.7 -
TFY3646
2 per end cap
Screw pin in case
except
TAY0002 of assembly by pinning (2 pins per
T760004
corner-cleat)
1 per end cap

Pin
TAY0000 of assembly by pinning (2 pins per
corner-cleat)

SEC-000048606

68
Options

Choice of locks and handles

TPW1201

TYPE OF OPENING
TPW1200
or

1 Leaf 2 Leaves 3 Leaves at 10 leaves


(101, 110) (211) (303, 330, 413, 431, 505, 550, 633, 615, 651, 835, 853, 1055)

IN
T960023
OUT

IN

T960010
OUT
Manoeuvre

IN

OUT
TPW6002
IN

OUT
TPW6009

IN
+
OUT
TPW6006 TPW3815

IN
+ +
TPW3815
OUT
TPW6006 TPW6014

IN
TPW6001

EXT
Lock

IN
TPW6012
OUT

IN
Cylinder

OUT
TPW6019

IN
+ +
TPW3704 + 2 x T930010
OUT
+ 4 x T770022
DESIGN

Possible Not Possible


SEC-000048546

69 AMBIAL PW
AMBIAL PW Options

Choice of locks and handles


DESIGN

TPW1200 TPW1201

TYPE OF OPENING
or

1 Leaves 2 Leaves 3 Leaves 4 Leaves 5 Leaves 6 Leaves 8 Leaves 10 Leaves


(101, (211) (301, (413, (505, (633, (835, (1055)
110) 330) 431) 550) 615, 651) 853)

IN
TPW6017
OUT
Lock

IN
TPW6018 *
OUT

* on slave leaf only

■ Lock for angle application

TPW1200 TPW1201
TYPE OF OPENING

or

1x1 Leaves 1x3 Leaves 1x5 Leaves 3x3 Leaves 3x5 Leaves 5x5 Leaves
(AS-211) (AS-413, (AS-615, (AS-633) (AS-835, (AS-1055)
AS-431) AS-651) AS-853)

IN
TPW6018 *
Lock

OUT

* on corner mullion only

Possible Not Possible


SEC-000051314

70
Hardware

Pull handle TPW6006

TPW6014

TPW3815

TPW6006

TPW6011

TPW3815

TPW6006
DESIGN

SEC-000049133

71 AMBIAL PW
DESIGN

Hp floor
AMBIAL PW

SEC-000048602
Hardware

Hp = handle height

74 Hp Hp min = 300

Hv = leaf height

72
Measurements

Hp floor

Hp floor =Hp + play


74 Hp Hp = handle height

Hp min = 300

Hv = leaf height
Hardware

Choice and distribution of hinges

*102 or 98 ■ Height < 2250mm (3 hinges)


28 28
100

100

100
TPW6003
TPW6005
TPW6005

TPW1108
TPW1201

TPW1102
TPW1200

Insert
TPW6011

TPW6011
100

100
96

TPW6011

120
TPW6001 or TPW6012
HP-6
HP-8

HP-8

HP

TPW6005 TPW6003
TPW6005
100

100
100

28 28

*102 or 98 * dimension is 102 for profile TPW1108


DESIGN

SEC-000048593
dimension is 98 for profile TPW1102

73 AMBIAL PW
AMBIAL PW Hardware

Choice and distribution of hinges


DESIGN

■ 2250mm < Frame height < 3000 (4 hinges)


*102 or 98
28 28
100

100

100
TPW6003
TPW6005 TPW6005
220 min

220 min
TPW6011
100

96

TPW6011

TPW1108
Insert TPW1201
TPW6011
TPW1102

TPW1200

TPW6011
100

100
Insert
96

TPW6011
TPW6011

120
TPW6001 or TPW6012
HP-6
HP-8

HP-8

HP

TPW6005

TPW6003
TPW6005
TPW6003
TPW6005
100
100

100

28 28

*102 or 98 * dimension is 102 for profile TPW1108


SEC-000048594 dimension is 98 for profile TPW1102

74
Hardware

Choice and distribution of hinges for slave


leaf and corner post
*102 or 98 ■ Height < 2250mm (3 hinges)
28
100

100
TPW6003
TPW6005
TPW6005

TPW1108
TPW1201

TPW1102
TPW1200

Insert
TPW6011
100

96

TPW6011

253.3
HP-6

TPW6018
HP-8

HP

TPW6005 TPW6003
TPW6005
100
100

28

*102 or 98 * dimension is 102 for profile TPW1108


DESIGN

SEC-000051319
dimension is 98 for profile TPW1102

75 AMBIAL PW
AMBIAL PW Hardware

Choice and distribution of hinges for slave


leaf and corner post
DESIGN

■ 2250mm < Frame height < 3000 (4 hinges)


*102 or 98
28
100

100
TPW6005
220 min

220 min
TPW6011
100

96

TPW1108
Insert TPW1201
TPW6011
TPW1102

TPW1200

TPW6011
100

Insert
96

TPW6011

253.3
HP-6

TPW6018
HP-8

HP

TPW6005

TPW6003
TPW6005
100
100

28

*102 or 98 * dimension is 102 for profile TPW1108


SEC-000051320 dimension is 98 for profile TPW1102

76
Hardware

Handle assembly

Internal handle
3 locking points

T960023

T770072

TPW6012

TPW3704
T930010

TPW3707

Internal & external handle


Key 3 locking points

T930007

T960010

T770072

TPW6012

TPW3704
T930010
T770072
TPW3707
DESIGN

SEC-000048599

77 AMBIAL PW
AMBIAL PW Hardware

Gear box handle assembly


DESIGN

 Internal handle
2 locking points

TPW3707

TPW6009
TPW6001

TPW3707
TPW3813

 Internal handle
2 locking points
in cylinder
TPW3813

TPW3707

TPW6002

TPW6001

TPW6019

TPW3707
SEC-000051327

78
Hardware

Lever gearbox assembly

TPW1202

TPW6018
TPW1200
or TPW1201

TPW2201

TPW1202

TPW6018

TPW1203
DESIGN

SEC-000051328

79 AMBIAL PW
AMBIAL PW Hardware

Main leaf: 3 locking points cylinder


DESIGN

Option:
TPW6016

TPW3800

T7977

Compatibility
TPW3812
European
Cylinder TPW3704

TPW6012 Handle, single T960023


22
Double rosette handle T960010
TAY0056 (with profile TPW1202
on TPW1200 or TPW1201)
or T1 = HP-97
T770072 (with profile TPW1202
T2 = HV-HP-38
on TPW1180 or TPW1102 +
TPW6001)

TPW6010
T770072

TPW3812

Compatibility
European
TPW3704
T7977 Cylinder
3 locking points with
TPW6017
roller Includes adaptator

T1 = HP-97
T2 = HV-HP-38

TPW3800

Option:
TPW6016
SEC-000048543

80
Hardware

Intermediate leaf: Cremone gearbox

Compatibility

Half cylinder TPW6019


TPW3800
Flat handle on
TPW6002
clean plate

T1 = HP-172
T2 = HV-HP-47

T7977

TPW3812
TPW3813

22
TPW3707

TPW6001

TPW3812

T7977

TPW3800
DESIGN

SEC-000048542

81 AMBIAL PW
AMBIAL PW Hardware

Slave leaf: Lever gearbox


DESIGN

Option:
TPW6016

TPW3800

T1 = HP-311
T2 = HV-HP+199

T7977

TPW3812

22

TPW6018

TPW3812

T7977

TPW3800

Option:
TPW6016
SEC-000051323

82
Hardware

Corner leaf: Lever gearbox

Option:
TPW6016

TPW3605
T1 = HP-311
T2 = HV-HP+199

T7977

TPW3812

22

TPW6018

TPW3812

T7977

TPW3605

Option:
DESIGN

TPW6016
SEC-000051324

83 AMBIAL PW
AMBIAL PW Hardware

Through unit
DESIGN

73 through unit 389

49.5

75
TPW1108

TPW1201
77.4
152 174

136 through unit 336

49 TPW1108 75

27

TPW1200
75

102 171

SEC-000048605

84
Hardware

Through unit corner

75

99.4
476
L

thro
ugh

TPW1108
unit

27

75 TPW1200

102 171
DESIGN

426
SEC-000051443
L
85 AMBIAL PW
AMBIAL PW Hardware

Through unit, adjustable frame


DESIGN

73 through unit 428

99.5

75
TPW1108

32

TPW1201

77.4
TPW6007

152 174

136 through unit 377

49 TPW1108
75

27

TPW1200
75
TPW6013

SEC-000048905 101.6 171

86
Summary

Profiles Frame profiles

TPW1100 TPW1101

TPW1102
TPW1103

TPW1107 TPW1108

TPW1110
DESIGN

SEC-000051257

87 AMBIAL PW
AMBIAL PW Summary

Profiles Leaf profiles


DESIGN

TPW1200

TPW1201

SEC-000051259

88
Summary

Profiles Rebate profiles

TPW1202 TPW2200 TPW2400

TPW1203

TPW2201 TPW2402
DESIGN

SEC-000051260

89 AMBIAL PW
AMBIAL PW Summary

Profiles Leaf profiles


DESIGN

TFY1301

TFY1302 TFY1303

SEC-000051266

90
Summary

Profiles Leaf profiles

TFY1304 TFY1305
DESIGN

SEC-000051267

91 AMBIAL PW
AMBIAL PW Summary

Profiles Jamb profiles


DESIGN

TPW1500

SEC-000051268

92
Summary

Profiles Glazing bead


profiles

T591001 T591002 T591003 T591004 T591005

T591006 T591007 T591008 T591009

T591010 T591011 T591012

T591013 T591014 T591221


DESIGN

SEC-000051272

93 AMBIAL PW
AMBIAL PW Summary

Profiles Miscellaneous
DESIGN

T134026 T730085 TPW2401

TPW2403 TPW2404 TPW2405 TPW4000

TPW2406

SEC-000051273

94
Summary

Accessories
T1110 T197112 T3160

Weather bar clip Glazing bead support Drain cap

T740043 T750220 T760004

Drainage tube for transom Corner cleat 18 x 13.7mm connector

T760005 T760006 T760009

28x13.7mm connector 38 x 13.7mm connector 68 x 13.7mm connector

T760012 T760206 T770070

98 x 13,7mm connector Anti rotation device 28mm Glazing bead clip

T7977 T930007 T930010

M8 rod Door handle square pin 8 x 140 mm Rosette, 6mm

T960010 T960023 TAT0049

Double handle + rosette Single lever handle Clip for anodised glazing bead

TFY3807 TPW3600 TPW3601

Glazing support Corner cleat 28x15x18 Corner cleat 38x15x18

TPW3602 TPW3603 TPW3604


DESIGN

Transom connector Adjustable jack for frame Alignement corner cleat set

95 AMBIAL PW
AMBIAL PW Summary

Accessories
DESIGN

TPW3605 TPW3606 TPW3607

Corner post set Corner finishion set Nº1 Corner finishion set Nº2

TPW3704 TPW3800 TPW3802

European cylinder DIN 45/50 Locking points guide Set of sealing parts

TPW3803 TPW3804 TPW3805

Weather tightness cap Plugs for vent mullion Plug set vent mullions

TPW3806 TPW3807 TPW3809

Door vent frame plugs Set of caps Frame plugs

TPW3810 TPW3811 TPW3812

End pieces weather bar Cramp Guide

TPW3813 TPW3815 TPW3816

Gear box adaptator Supplementary plastic piece for puller Glazing wedge support

TPW3817 TPW3818 TPW6001

Adjustable frame profile caps Cover piece for drainage Lock

TPW6002 TPW6003 TPW6005

Technal handle with key Top/bottom rolling set Hinge

96
Summary

Accessories
TPW6006 TPW6007 TPW6009

Pull handle Magnetic holder Technal handle

TPW6010 TPW6011 TPW6012

Striker plate Central hinge 3 locking point with shoot bolt

TPW6013 TPW6014 TPW6016

Magnetic holder, height 12.5mm Loop handle support Strike set

TPW6017 TPW6018 TPW6019

Lock with roller Includes adaptator Bolt lock with lever 22 mm Half cylinder 45 Technal

DESIGN

97 AMBIAL PW
AMBIAL PW Summary

Gaskets
DESIGN

T1311 T190259 T4010003

Weatherpile gasket Gap infill gasket External glazing gasket, black

T410010 T710002 T710004

Multifunction gasket 2mm glazing gasket 4mm glazing gasket

T710041 T790002 T790003

Overlapping gasket, door Insulating gasket for vent rebate Insulating gasket for fixed rebate

TAS0015 TAS0016 TAS0017

5 mm glazing gasket 6 mm glazing gasket 7 mm glazing gasket

TAS0018 TAS0509 TPW5000

8 mm glazing bead gasket Brush 13/7 Vent gasket

TPW5002 TPW5003 TPW5004

Central gasket Finish cover Bottom frame gasket

TPW5005

Threshold gasket

98
Summary

Screws
T770020 T770022 T770072

Screw tfx 2/4 4,2x11 af torx Screw tfx 5/7 4,2x13 af torx Self-tapping countersunk screw 5x28, T20

T770082 TAY0000 TAY0002

Fillister head drilling screw 4.2x22 6x10 mm bush Conical screw, stainless, 6 mm

TAY0056 TPW3707 TPW3708

Countersunk screw ST4.2x16 Countersunk screw ST3.9x13 Countersunk screw ST4.2x45

TVE037 TVE043

Self tapping screw Screw

DESIGN

99 AMBIAL PW
AMBIAL PW Summary

Tooling
DESIGN

T2700 TEK7001 TEK7017

Perfopack pneumatic tool Roller for central gasket Open out drainage cassette

TEK7037 TOM023 TPW7000

Cassette holder for press 2700 Gasket cutter Punching tool sash corners PW

TPW7001 TPW7002 TPW7003

Punching tool for locking pins Punching tool for lock PW Punching tool for sash PW

TPW7004 TPW7005 TPW7006

Punching tool for frames PW Jig for hinge positioning Drainage drilling jig

TPW7007 TPW7008 TPW7009

Jig for adjustable frame Tool for notching rail support Step drill for TPW7007

TPW7010 TW110 TW118

Frame connection Jig Small joint sealant Silicon cartridge

TW150 TW200 TW201

Black Butyle Cyanoacrylate glue for gaskets 2 component glue

TWU0004 TWU0005 TWU0009

Security jack Cassette holder Cassette for pinned cleats

100
Summary

Tooling
TWU0015 TWU0020

Tool Concealed drainage punch tool

DESIGN

101 AMBIAL PW
AMBIAL PW Summary

Abbreviations
DESIGN

APD = Anti-finger trapping device


BO = Tilt and Turn (T & T)
BTC = Sill, flashing, architrave
CC = Aluminium clip section for glazing bead
DEP = Right when pushing
EPDM = Etylene Propylene Diene Monomer
FP = Door closer
FPI = Integral Door Closer
GEP = Left when pushing
H = Height (H1, H2 ...)
Hf = Rebate height
ho = Opening frame height
Hp = Handle height (from bottom of the leaf)
Hv = Leaf height
Hv1 / Hv2 = Transom height
L = Width (L1, L2 ...)
Lf = Rebate width
Lv = Leaf width (Lv1, Lv2 ...)
OF = Open in side hung
OB = Turn & Tilt
OA = Visible version
OM = Minimal version
PDA = Double action door
PF = Balcony door
PMR = Persons with Restricted Mobility
PSA = Single action door
RES = Residential
SAGP = Single action left push
SADP = Simple action right push
SF = Slave leaf
SFP = Slave leaf percussion
T1, T2, T3 ... = Rods
Vtl / Vtx = Leaf / leaves
VS = Main leaf
VV = Swing door

102
Summary

Symbols

Symbols Designation Symbols Designation Symbols Designation

Important note Drilling Screw


Warning

Punching Inject glue Key (Allen, Torx,


...)

Machining Sealing hit


Sealant EPDM
compatible

Milling Glue Pin punch

CN Machining by Cutting tool Rivet tool


CNC machine

Milling template Pliers Assembly


XX
XXXXXXXXX

XXXXXX
only manual
XXXXX

Drill jig Pliers for folding xx Head type and


dimension
xx

Tools
DESIGN

SEC-000048243

103 AMBIAL PW
AMBIAL PW Summary

Summary of change
DESIGN

Version Date Description

- Page A update, New cover.


- New page 6 and 7.
- Page update 9 at 12, New Thermal performance.
- Page update 13 at 41.
- New page 42 at 45, Applications for angle.
- Page update 48 a 56 Modification des coupes.
- New page 56, 60, 61.
- Page update 67 at 70, Modification table.
005 10/2018 - Page update 74 at 90.
- Page update 80 and 81 Add Option TPW6016.
- New page 75, 76, 78, 79, 82, 83, 85
- Page update 87 at 89, Add accessories TPW3604, TPW3605, TPW3606,
TPW6002, TPW6009, TPW6016, TPW6018, TPW6019.
- Page update 90 and 91, Add gaskets TPW5005, T401003, T710041, Add
screw vis T770082.
- Page update 92 et 93, Add tools TPW7010.
- Page update 94 at 101, Add profiles TPW1203, TPW2201, TPW2405.

104
DESIGN

105 AMBIAL PW
COPYRIGHT © - October 2018 - Document n° 5940.005

The entire content of this documentation, including articles, images, screen prints, graphic design, logos,
downloads and other files, is the exclusive property of Hydro Building Systems companies and are protected by
French and International laws on Copyright and also by French and International laws on Intellectual Property.
Any reproduction or copy made in whole or in part and in any form without the agreement
of the author is illegal and constitutes infringement sanctioned by civil and penal court.
Imagine what’s next (Imaginons l’avenir)

Vous aimerez peut-être aussi