Académique Documents
Professionnel Documents
Culture Documents
AUTOMATIC CHANGEOVER
WITH CURRENT LIMITER
iACCL M600
“Seamless, uninterrupted
changeover between power
sources”
www.elmeasure.com
Why Elmeasure iACCl ?
iACCL is a smart programmable device that is compatible to limit and allocate power based on requirements.
In a conventional approach, manual source transfer could lead to the disruption of key functions in expensive equipment.
While iACCL overcomes the problem by automatic switching of mains supply to standby generator during mains failure.
Also, power is automatically switched off for 5 seconds and reinstates automatically during overload conditions.
iACCL standouts with its ability to set parameters on site such as a programmable number of tripping cycles, current, over
voltage and under voltage protection. Also, single phase iACCL* is built with a separate control for power and lighting load
to reduce wiring cost.
30sA
Intelligent Tripping
iACCL operates on the principle of an inverse
SET AMPS
curve with continuous monitoring of phase
current and provides a faster trip time for high
overload conditions.
sA
sT sT
SET TIME
iACCL Operation:
Availability of mains supply:
During the availability of mains supply, the device will operate the
load using mains supply.
Applications
Commercial centres Airports & Railways Medical Facilities Banking & Finance Infrastructure &
Telecommunications.
iACCL
AUTOMATIC CHANGEOVER
WITH CURRENT LIMITER
FOR A SEAMLESS, UNINTERRUPTED CHANGEOVER
BETWEEN POWER SOURCES!
Single Phase
90 mm
96mm
72mm 67mm
Three Phase
144 mm
/ 7.5 mm
15 mm
144 mm 127 mm
105 mm
40A to 63A
Unique Features :
218mm
195mm
163mm
310. mm
285mm
310mm
265mm
183. mm
186. mm
198mm
10mm
5 mm
operations. 10 mm
238mm
5mm
elmeasure.com
Datasheet
Torque 1 N-m 1 N-m 2 N-m 2 N-m 2.5 N-m 2 N-m 2 N-m 2.5 N-m
Wire gauge 11 AWG 11 AWG 6 AWG 4 AWG 1 AWG 6 AWG 4 AWG 1 AWG
STANDARDS
Compliance IEC 60947-6-1 IS / IEC 60898 - 1
USE ENVIRONMENT CHARACTERISTICS
Temperature Ambient: -5 to +550 C, Storage: -25 to +750 C, Operating: -10 to +550 C, Operating Humidity: 5 to 85% RH
Environmental Class B
Pollution degree 2
elmeasure.com
Registered Office Sales Offices
BENGALURU BENGALURU
PLOT NO.: 47-P, HARDWARE PARK, KIADB, #57, EBENEZER ENCLAVE, NORRIS ROAD, NEAR
HUVINAYAKANAHALLI, JALA HOBLI, YELAHANKA TALUK, NANJAPPA CIRCLE LANGFORD TOWN,
BENGALURU - 562 149. KARNATAKA INDIA BENGALURU - 560 025. KARANATAKA, INDIA
COIMBATORE
Manufacturing Units # 150, RA J ILLAM, NVM LAYOUT NEW SIDDHAPUDHUR
UNIT I COIMBATORE - 641 019. TAMIL NADU, INDIA
PLOT NO.: 47-P, HARDWARE PARK, KIADB,
HUVINAYAKANAHALLI, JALA HOBLI, YELAHANKA TALUK,
BENGALURU - 562 149. KARNATAKA, INDIA CHENNAI
# 945, GROUND FLOOR, MIG, FIRST MAIN ROAD, TNHB
COLONY, VELACHERY,
CHENNAI – 600 042. TAMIL NADU, INDIA
UNIT II
GOWTHAM GARDEN NO. 4, VEERAPANDI
COIMBATORE - 641 019. TAMIL NADU, INDIA
SECUNDERABAD
# 51, 1ST FLOOR, CHANDRAGIRI COLONY, NEAR RTA,
THRIMUGHERRY,
UNIT III SECUNDERABAD - 500 015. TELANGANA, INDIA
#764, 4TH PHASE, 707, YELAHANKA NEW TOWN,
BENGALURU - 560 064. KARNATAKA, INDIA
MUMBAI
# 101, MILLENIUM PLAZA BEHIND SAKINAKA
TELEPHONE EXCHANGE, ANDHERI - KURLA ROAD
SAKINAKA, ANDHERI (EAST)
MUMBAI - 400 072. MAHARASTRA, INDIA
Service Hotline:
support@elmeasure.com
DELHI
+91 639-1010-320 # G-10, G-11, GROUND FLOOR, BAISOYA COMPLEX,
NAYABANS, SECTOR-15,
Monday to Friday 8:00 am. to 5:00 pm. IST NOIDA – 201301. INDIA.
PC/IACCL/V0.2/1118