Académique Documents
Professionnel Documents
Culture Documents
Answer saved
Marked out of 1.00
Flag question
Question text
What today's network design would contain the scope of disruptions on a network should a
failure occur?
Select one:
a. The installation of only enterprise class equipment throughout the network
b. The configuration of all access layer devices to share a single gateway
c. The deployment of distribution layer switches in pairs and the division of access layer
switch connections between them
d. The reduction in the number of redundant devices and connections in the network core
Clear my choice
Question 2
Answer saved
Marked out of 1.00
Flag question
Question text
Which among the listed below are the 2 functional parts of the network that can be
combined to form a collapsed core design in Cisco Enterprise Architecture?
Select one:
a. Enterprise edge and access layer
b. Provider edge and access layer
c. Access and distribution layer
d. Distribution and core layer
Clear my choice
Question 3
Answer saved
Marked out of 1.00
Flag question
Question text
Why would a network administrator of RMS Defence Contractor company issue the show
cdp neigbors command on a router especially if a network problem occurs?
Select one:
a. To display router ID and other information about OSPF neighbors
b. To display line status and other information about directly connected Cisco devices
c. To display device ID and other information about directly connected Cisco devices
d. To display routing table and other information about directly connected Cisco devices
Clear my choice
Question 4
Answer saved
Marked out of 1.00
Flag question
Question text
Select one:
a. It is used to monitor and make configuration changes to a network device over a network
connection.
b. It uses a direct connection to a console or AUX port.
c. It uses a terminal emulation client.
d. It is used for initial configuration or when a network connection is unavailable.
Clear my choice
Question 5
Answer saved
Marked out of 1.00
Flag question
Question text
Access Layer is the layer of which the hierarchical enterprise LAN design model would PoE
for VoIP phones and access points be considered.
Select one:
True
False
Question 6
Answer saved
Marked out of 1.00
Flag question
Question text
Select one:
a. show ip eigrp neighbors
b. show ip protocols
c. show ip eigrp interfaces
d. show ip interface brief
Clear my choice
Question 7
Answer saved
Marked out of 1.00
Flag question
Question text
Select one:
a. They are service provider switches that aggregate traffic at the edge of the network.
b. They are campus LAN switches that perform the same functions as Cisco 2960 switches.
c. They are cloud-managed access switches that enable virtual stacking of switches.
d. They promote infrastructure scalability, operational continuity, and transport flexibility.
Clear my choice
Question 8
Answer saved
Marked out of 1.00
Flag question
Question text
Select one:
a. show interfaces
b. show ip interface brief
c. show ip protocols
d. show ip route
Clear my choice
Question 9
Answer saved
Marked out of 1.00
Flag question
Question text
Core Layer is a design model layer that forwards traffic from/to different local networks.
Select one:
True
False
Question 10
Answer saved
Marked out of 1.00
Flag question
Question text
Which network design solution below in the current technology today will extend access
layer connectivity to user devices?
Select one:
a. Redundancy implementation
b. Wireless connectivity implementation
c. Implementing etherChannel implementation
d. Routing protocol implementation
Clear my choice