Académique Documents
Professionnel Documents
Culture Documents
Topology
Objectives
Part 1: Gather PDU Information
Part 2: Reflection Questions
Background
This activity is optimized for viewing PDUs. The devices are already configured. You will gather PDU
information in simulation mode and answer a series of questions about the data you collect.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3
Packet Tracer - Identify MAC and IP Addresses
At Device: Computer
e. Click Capture / Forward to move the PDU to the next device. Gather the same information from Step 1d.
Repeat this process until the PDU reaches its destination. Record the PDU information you gathered into
a spreadsheet using a format like the table shown below:
Test At Device Dest. MAC Src MAC Src IPv4 Dest IPv4
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3
Packet Tracer - Identify MAC and IP Addresses
Catatan :
Silahkan bisa langsung di jawab di file ini, tulis jawaban pada bagian yang telah disediakan dengan
menggunakan warna font jawaban merah.
PDU : Protocol Data Unit.
Buatlah topology seperti di atas, kemudian isi ke-2 interface router dengan IP 10.10.10.1 dan
172.16.31.1 (jadikan kedua IP ini sebagai gateway di masing-masing komputer yang sesuai dengan
jalurnya).
Selanjutnya ikuti cara di step 1, ubah ke mode simulasi untuk melihat proses yang terjadi.
Kerjakan sesuai instruksi yang ada pada file ini.
*silahkan bisa menggunakan google translete apabila kesulitan dalam menerjemahkan instruksi.
*cari materi tentang ethernet, mac address, dan IP address untuk membantu menyelesaikan tugas
ini.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3