Académique Documents
Professionnel Documents
Culture Documents
Page 1 of 3
Shutdown SIS
Previous Screen
Specifications
D10R Track-Type Tractor Power Train
Media Number -SENR8419-04 Publication Date -01/07/2011 Date Updated -26/07/2011
i02571673
Tracks
SMCS - 4170
S/N - -
Specifications
Illustration 1 g01136804
Note: Refer to Instructions, SEBF8022, "Guideline For Reusable Parts: Sealed and Lubricated Track"
for instruction on reusability.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 26-Sep-19
D10R Track-Type Tractor 3412 Engine 3KR00001-UP (MACHINE)(SEBP2478 - 100)/B... Page 2 of 3
Torque for bolts that hold the half links together ... 870 ± 90 N·m (650 ± 65 lb ft)
Then turn the bolts an additional ... 120 deg
Apply 2P-2506 Thread Compound or 5P-3931 Anti-Seize Compound on the threads, the body, and
the washer face of each bolt before installation.
Torque for bolts that hold the track shoes to the links ... 870 ± 90 N·m (641.7 ± 66.4 lb ft)
Then turn the bolts an additional ... 120 deg
Apply 2P-2506 Thread Compound or 5P-3931 Anti-seize Compound on the threads, the body, and
the washer face of each bolt before installation.
Height for new extreme service grouser ... 101.5 ± 1.5 mm (4.0 ± 0.06 inch)
Height for new link ... 181.00 ± 0.25 mm (7.126 ± .010 inch)
(5) Distance from the center of one pin to the center of the next pin (pitch) ... 260.35 ± 0.13 mm
(10.250 ± .005 inch)
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 26-Sep-19
D10R Track-Type Tractor 3412 Engine 3KR00001-UP (MACHINE)(SEBP2478 - 100)/B... Page 3 of 3
Illustration 2 g01136806
(6) Thickness of new thrust ring ... 11.10 ± 0.08 mm (.437 ± .003 inch)
(7) Distance from the face of the link to the end of the bushing ... 1.66 ± 0.13 mm (0.065 ± 0.005
inch)
(8) Bushings
(9) Maximum permissible end clearance (end play) ... 0.07 + 0.13 - 0.07 mm (0.003 + 0.005 - 0.003
inch)
(10) Maximum offset of the pin from the face of the counterbore of the link ... 1.97 ± 0.13 mm (0.08 ±
0.005 inch)
Copyright 1993 - 2019 Caterpillar Inc. Thu Sep 26 13:18:27 UTC+0800 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 26-Sep-19