Académique Documents
Professionnel Documents
Culture Documents
RATE AMOUNT
NO. DESCRIPTION UNIT QTY.
(Rs.) (Rs.)
A PUMPS & EQUIPMENT
1 Supply, Installation, Testing & Commissioning of Domestic water lifting to overhead water tank pumps
complete composite hydropneumatic system consisting of horizontal /vertical multistage centrifugal pump
having stainless steel SS-304 stage casing and SS 304 impellers with stainless steel SS-304 shaft as per IEC
standards and GJL250 cast iron suction & discharge casing with single mechanical seal and pressurised tank
of suitable capacity as per manufacturer calculation, complete with all standard accessories including
pressure switch, pressure gauges, non-return & isolating valves on suction and delivery side with nuts, bolts
& washer including mild steel flanges, where ever required with 3 mm thick rubber insertion, with
necessary protection and operational devices i.e alternate pumping operation and shut-off during dry
running conditions etc. with suitable electrical motor to be operated on 210/220 OR 400/440 volt 50 cycle
AC supply, suitable for following duty and with total no. of pumps - 3 nos.(2 working+1standby) complete
with Control Unit Panel, manifolds & chassis, as per the approval of Project-in-charge complete complete
with M.S fabricated base frame, nuts and bolts bolted to cement concrete foundations complete as per
requirement.
No of Pump - 3(2W+1S)
Power in Kw - 5 KW each Pump
Flow - 250 LPM
Per Pump Head - 40-50 M Set 1
2 Supply, Installation, Testing & Commissioning of Filter Feed pumps consisting of horizontal /vertical 138.89
multistage centrifugal pump having stainless steel SS-304 stage casing and SS 304 impellers with stainless
steel SS-304 shaft as per IEC standards and GJL250 cast iron suction & discharge casing with single
mechanical seal and pressurised tank of suitable capacity as per manufacturer calculation, complete with all
standard accessories including pressure switch, pressure gauges, non-return & isolating valves on suction
and delivery side with nuts, bolts & washer including mild steel flanges, where ever required with 3 mm
thick rubber insertion, with necessary protection and operational devices i.e alternate pumping operation
and shut-off during dry running conditions etc. with suitable electrical motor to be operated on 210/220 OR
400/440 volt 50 cycle AC supply, suitable for following duty and with total no. of pumps - 2 nos.(1
working+1standby) complete with Control Unit Panel, manifolds & chassis, as per the approval of Project-in-
charge complete complete with M.S fabricated base frame, nuts and bolts bolted to cement concrete
foundations complete as per requirement.
Power = 3.0 KW
Flow Rate = 150 LPM
Head = 20-30 Mtrs.(2 No. 1W+1S) Set 1 35 000.00 35 000.00
2 Providing, fixing, testing & commissioning vertical self supporting Activated Carbon Filter (ACF) fabricated
from M.S. Sheet as per IS: 2825, pressure gauge at inlet & outlet, sample cock, G.I. Class 'C' face piping, C.I.
Butterfly valve / Multiport Valve and all accessories, air vent valve with piping, with initial charge of filter
media for activated carbon filter, painting inside with epoxy paint and outside with two coat of synthetic
enamel paint complete.
3 Providing, fixing, testing & commissioning of metering pump type chemical doser with 100 lits.HDPE/ FRP
solution tank, injection fitting assembly, suction and delivery hose upto the point of injection, capacity 0-6
lph, complete in all respects for treated water tank.
RATE AMOUNT
NO. DESCRIPTION UNIT QTY.
(Rs.) (Rs.)
4 Providing , fixing, testing and commissioning of water softener fabricated from MS plate as per IS : 2825
(shell & thick dished ends) complete with initial charge of resins, GI class 'C' face piping, CI butterfly valves,
pressure gauge, hydraulic brine injector, accessories, painting inside with epoxy paint and outside with two
coat of red oxide primer and two or more coat of synthetic enamel paint, including suitable PVC/HDPE brine
tank of 2 regeneration capacity complete with resins of approved quality and make.
Hardness
Inlet - 400 PPM (Approx.)
Outlet - Commercial zero (<5 PPM)
Capacity - 8500 LPH (8.5 m3/hour)
Operating pressure - 3.0 kg/Sq.cm
Test pressure - 5.5 Kg/Sq.cm
Suggested Resin Quantity - 600-650 Kg
Suggested dia - 600-750 mm
Supply,Installation, testing & commissioning Each 1 95 000.00 95 000.00
5 Providing, fixing, testing and commissioning of Electronic Level indicator including sensor, Display Panel, Each 2 15 000.00 30 000.00
cabling and all fitting and accessories (For Underground Water Tank).
6 Supplying, installing, testing and commissioning of centrifugal mud sump pumps, suitable for 415 ± 10%
Volts, 3 phase/230 ±10% volts 50 Hz A.C. power supply. Each pump shall suitable for automatic/manual
operation complete with starter / control panel as per specification.