Vous êtes sur la page 1sur 14

Requirement of Standard lis

IEC Standard
SL No Name of Standard Description
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1:
1 IEC 60189-1
General test and measuring methods

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2:
2 IEC 60189-2
Cables in pairs, triples, quads and quintuples for inside installations

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3:
3 IEC 60189-3 Equipment wires with solid or stranded conductor wires, PVC insulated, in
singles, pairs and triples

Polyvinyl chloride insulated cables for rated voltage up to and including 450/750 V
4 IEC 60227-1
, Part-1 general requirement

PVC insulated cable for rated voltage up to & including 450/750 V part -2 test
5 IEC 60227-2
method

Polyvinyl chloride insulated cables for rated voltage up to and including 450/750 V
6 IEC 60227-3
, Part -3 Non sheathed cable for fixed wiring
Polyvinyl chloride insulated cables for rated voltage up to and including 450/750 V
7 IEC 60227-4
, Part-4, Sheathing cables for fixed wiring

Polyvinyl chloride insulated cables for rated voltage up to and including 450/750 V
8 IEC 60227-5
, Part-5, Flexible cables

Polyvinyl chloride insulated cables for rated voltage up to and including 450/750 V
9 IEC 60227-6
, Part-6, Lift cables & cables for flexible connections

Polyvinyl chloride insulated cables for rated voltage up to and including 450/750 V
10 IEC 60227-7
, Part-7, Flexible cables screened & unscreened with two or more conductors

11 IEC 60230 Impulse tests on cables and their accessories


Electrical cable- calculation for the currant rating -Part -1 current rating equation
12 IEC 60287-1-1
(100% load factor) and calculation of losses -section -1 general

Electrical cable- calculation for the currant rating -Part -1 current rating equation
13 IEC 60287-1-2 (100% load factor) and calculation of losses -section -2 Sheath eddy current loss
factor for two circuits in flat formation

Electrical cable- calculation for the currant rating -Part -1 current rating equation
14 IEC 60287-1-3 (100% load factor) and calculation of losses -section -3 current sheathing
between parallel single-core cables and calculation of circulating current loss
Electric cables – Calculation of the current rating – Part 2-1: Thermal resistance –
15 IEC 60287-2-1
Calculation of thermal resistance

Electrical cable- calculation for the currant rating Part-2 thermal resistance-
16 IEC 60287-2-2 section 2:a method for calculating reduction factor for groups of cables in free air,
protected from solar radiation

Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for
20 IEC 60332-1-1
vertical flame propagation for a single insulated wire or cable - Apparatus

Tests on electric cables under fire conditions Part 1:test for vertical flame
21 IEC 60332-1-2 propagation for a single insulated wire or cable section-2 procedure for 1 kW pre-
mixed flame

Tests on electric cables under fire conditions Part 1-3:test for vertical flame
22 IEC 60332-1-3 propagation for a single insulated wire or cable: procedure for determination of
flaming droplets/particles.

Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for
23 IEC 60332-2-1
vertical flame propagation for a single small insulated wire or cable - Apparatus

Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for
24 IEC 60332-2-2 vertical flame propagation for a single small insulated wire or cable - Procedure
for diffusion flame

Tests on electric cables under fire conditions Part 3:test for vertical flame spread
25 IEC 60332-3-10
of vertically mounted bunched wires or cables section 10 :apparatus

Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for
26 IEC 60332-3-22
vertical flame spread of vertically-mounted bunched wires or cables - Category A

Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for
27 IEC 60332-3-23
vertical flame spread of vertically-mounted bunched wires or cables - Category B

Tests on electric cables under fire conditions Part 3:test for vertical flame spread
28 IEC 60332-3-24
of vertically mounted bunched wires or cables section 24 :category C

Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for
29 IEC 60332-3-25
vertical flame spread of vertically-mounted bunched wires or cables - Category D

Common test methods for insulating and sheathing materials of electric cables -
30 IEC 60811-3-1 Part 3: Methods specific to PVC compounds - Section One: Pressure test at high
temperature - Tests for resistance to cracking
IEC 60811-3-2
Methods specific to PVC & PVC Compounds section 1 resistance to
31 IEC 60811-4-1 environmental stress cracking -measurement of the Melt flow index, Carbon black
content test
Insulating and sheathing materials of electric and optical cables - Common test
methods - Part 4-2: Methods specific to polyethylene and polypropylene
compounds - Tensile strength and elongation at break after conditioning at
32 IEC 60811-4-2
elevated temperature - Wrapping test after conditioning at elevated temperature -
Wrapping test after thermal ageing in air - Measurement of mass increase - Long-
term stability test - Test method for copper-catalyzed oxidative degradation

Insulating and sheathing materials of electric and optical cables - Common test
methods - Part 5-1: Methods specific to filling compounds - Drop-point -
33 IEC 60811-5-1
Separation of oil - Lower temperature brittleness - Total acid number - Absence of
corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C

Measurement of smoke density of electrical cables burning under defined


35 IEC 61034-1
conditions Part-1 Test apparatus
Measurement of smoke density of cables burning under defined conditions - Part
36 IEC 61034-2
2: Test procedure and requirements

Aluminium conductors for overhead power transmission- Aluminium Stranded


37 IEC 207
Conductors
Aluminium conductors and aluminium conductors, Steel-reinforced for overhead
38 IEC 209
power transmission- Aluminium Stranded Conductors
39 IEC 60317-0-1 Standard Specification for Super Enamelled winding wire
40 IEC 60317-34 Standard Specification for Super Enamelled winding wire
41 ISO/IEC 11801 Information technology - Generic cabling for customer premises
Electrical installations in ships - Part 350: General construction and test methods
42 IEC 60092-350 of power, control and instrumentation cables for shipboard and offshore
applications

Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV
43 IEC 60092-353
and 3 kV

Electrical installations in ships –Part 354: Single- and three-core power cables
44 IEC 60092-354 with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV
(Um = 36 kV)

Tests for electric cables under fire conditions – Circuit integrity –


45 IEC 60331-11
Part 11: Apparatus – Fire alone at a flame temperature of at least 750 °C
Tests for electric cables under fire conditions –Circuit integrity –Part 12:Apparatus
46 IEC 60331-12
– Fire with shock at a temperature of at least 830 °C

Tests for electric cables under fire conditions –Circuit integrity –Part
47 IEC 60331-21 21:Procedures and requirements –Cables of rated voltage up to and including
0,6/1,0 kV

Tests for electric cables under fire conditions –Circuit integrity –Part
48 IEC 60331-23
23:Procedures and requirements –Electric data cables

Tests for electric cables under fire conditions –Circuit integrity –Part
49 IEC 60331-31 31:Procedures and requirements for fire with shock – Cables of rated voltage up
to and including 0,6/1 kV
est on gases evolved during combustion of materials from cables - Part 1:
50 IEC 60754-1
Determination of the amount of halogen acid gas

Test on gases evolved during combustion of electric cables - Part 2:


51 IEC 60754-2 Determination of degree of acidity of gases evolved during the combustion of
materials taken from electric cables by measuring pH and conductivity

British Standard
SL No Name of Standard Description
42 BS 183 General pirpose galvanized steel wire strand-(Guy Wire)
Aluminium conductors and aluminium conductors, Steel-reinforced for overhead
43 BS 215-1
power transmission- Aluminium Stranded Conductors
Aluminium conductors and aluminium conductors, Steel-reinforced for overhead
44 BS 215-2
power transmission- Aluminium Conductors Steel-reinforced
45 BS 5099 Voltage level for spark testing
Electric Cables- Thermosetting insulated, armoured cables for voltages of
46 BS 5467
600/1000V and 1900/3300V.

Fire detection and fire alarm systems for buildings. Code of practice for design,
47 BS 5839-1 installation, commissioning and maintenance of systems in non-domestic
premises

Electric Cables- PVC insulated, armoured cables for voltages of 600/1000V and
48 BS 6346
1900/3300V.
Test method for resistance to fire of cables required to maintain circuit integrity
49 BS 6387
under fire conditions
50 BS 6485 PVC covered conductors for Overhead power lines
51 BS 6746 Specification for PVC insulation and sheath of electric cables

Electric cables. Thermosetting insulated and thermoplastic sheathed cables for


52 BS 7211 voltages up to and including 450/750 V for electric power and lighting and having
low emission of smoke and corrosive gases when affected by fire

Electric cables. Specification for 300/500 V fire resistant screened cables having
53 BS 7629-1 low emission of smoke and corrosive gases when affected by fire. Multicore and
multipair cables

Specification for insulating and sheathing materials for cables. General


54 BS 7655-0
introduction
Specification for insulating and sheathing materials for cables. Elastomeric
55 BS 7655-1.3
insulating compounds. XLPE. Sec1.3 XLPE
Specification for insulating and sheathing materials for cables. PVC insulating
56 BS 7655-3.1
compounds. Harmonized types
Specification for insulating and sheathing materials for cables. PVC insulating
57 BS 7655-3.2
compounds. Hard grade types. Hard grade types
Specification for insulating and sheathing materials for cables. PVC sheathing
58 BS 7655-4.1
compounds. Harmonized types
Specification for insulating and sheathing materials for cables. PVC sheathing
59 BS 7655-4.2
compounds. General application. General application

Specification for insulating and sheathing materials for cables. Thermoplastic


sheathing compounds having low emission of corrosive gases, and suitable for
60 BS 7655-6.1
use in cables having low emission of smoke when affected by fire. General
application thermoplastic types

Electric cables-600/100V, armoured fire resistancecable having thermosetting


61 BS 7846
insulation and low emission smoke.

Methods of test for assessment of the fire integrity of electric cables. Test for
62 BS 8434-2 unprotected small cables for use in emergency circuits. BS EN 50200 with a 930°
flame and with water spray

Method for assessment of fire integrity of large diameter power cables for use as
63 BS 8491 components for smoke and heat control systems and certain other active fire
safety systems

Electric cables- Code of practice for the storage, handling, installation and
64 BS 8512
disposal of cables on wooden drums.
Method of test for resistance to fire of unprotected small cables for use in
65 BSEN 50200
emergency circuits
66 BSEN 50214 Flat polyvinyl chloride sheathed flexible cables

Common test methods for cables under fire conditions. Test for resistance to
67 BSEN 50265
vertical flame propagation for a single insulated conductor or cable. Apparatus

Multi-element metallic cables used in analogue and digital communication and


68 BSEN 50288-3-1 control. Sectional specification for unscreened cables characterised up to 100
MHz. Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and


69 BSEN 50288-5-1 control. Sectional specification for screened cables characterized up to 250 MHz.
Horizontal and building backbone cables

Multi-element metallic cables used in analogue and digital communication and


70 BSEN 50288-7
control. Sectional specification for instrumentation and control cables

Communication cables. Common design rules and construction. Polyethylene


71 BSEN 50290-2-23 insulation for multi-pair cables used in access telecommunication networks:
Outdoor cables

72 BSEN 50290-2-24 Communication cables. Common design rules and construction. PE sheathing

Communication cables. Common design rules and construction. Halogen free


73 BSEN 50290-2-26
flame retardant insulation compounds
Communication cables. Common design rules and construction. Halogen free
74 BSEN 50290-2-27
flame retardant thermoplastic sheathing compounds
Fire hazard testing. Test flames. 1 kW nominal pre-mixed flame: Apparatus,
75 BSEN 60695-11-2
confirmatory test arrangement and guidance
76 BSEN 61034-1 Measurement of smoke density of cables burning under defined condition

Plastics. Determination of burning behaviour by oxygen index. Ambient-


77 BSEN ISO 4589-2
temperature test
Plastics. Determination of burning behaviour by oxygen index. Elevated
78 BSEN ISO 4589-3
temperature tes
79 BS 2004 Specification for PVC insulation and sheathed Flexible cables

Other Standards
SL No Name of Standard Description

These standards apply to materials, constructions, and testing of aoss-


1 NEMA WC-7 linked-thermosetting-pol.thylene- insulated wires and cables that are
used for the trans- mission and distribution of electrical energy for
normal conditions of installation and service, either indoors, aeriai,
underground, or submarine.
Power cables - Specifications for power cables 0.6/1 kV and above for
2 VDE 0271-3.69 special applications
Equipment wires and stranded equipment wires for
3 VDE 0812 telecommunicationssystems and data processing systems

4 VDE 0815 wires for telecommunicationssystems and data processing systems

5 VDE 0816-1 wires for telecommunicationssystems and data processing systems

6 UL 444 Tests for Cat 5, Cat 6 type Cables


7 UL 2196 Tests for Fire Resistive Cables

ASTM
1 ASTM-B1 Standard Specification for Hard-Drawn Copper Wire
2 ASTM-B115 Standard Specification for Electrolytic Copper Cathode
3 ASTM-B193 Standard Test Method for Resistivity of Electrical Conductor Materials
4 ASTM-B2 Standard Specification for Medium-Hard-Drawn Copper Wire

5 ASTM-B230 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes

6 ASTM-B231 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

Standard Specification for Concentric-Lay-Stranded Aluminum Conductors,


7 ASTM-B232
Coated-Steel Reinforced (ACSR)

8 ASTM-B233 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

9 ASTM-B3 Standard Specification for Soft or Annealed Copper Wire

10 ASTM-B398 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes

11 ASTM-B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire


Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel
12 ASTM-B416
Conductors
Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for
13 ASTM-B498
Aluminum Conductors, Steel Reinforced (ACSR)
Standard Specification for Aluminum 1350 Round Wire, Annealed and
14 ASTM-B609
Intermediate Tempers, for Electrical Purposes
Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard,
15 ASTM-B8
Medium-Hard, or Soft
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion
16 ASTM-D1238
Plastometer
17 ASTM-D1603 Standard Test Method for Carbon Black In Olefin Plastics

18 ASTM-D2765-1 Standard Test Methods for Determination of Gel Content and Swell Ratio of
Crosslinked Ethylene Plastics

19 ASTM-D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of
Plastics

Standard Test Method for Measuring the Minimum Oxygen Concentration to


20 ASTM-D2863
Support Candle-Like Combustion of Plastics (Oxygen Index)

21 ASTM-D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and
Cable
tandard list
Edition Year Quantity Price Original (Tk)

2007 1 8000

2007 1 11200

2007 1 5600

2.2 1998 1 5600

Amd. 1 2003 1 8400

2.1 1997 1 12000

2.1 1997 1 3200

2.2 2003 1 6800

3 2001 1 8000

Amd. 2 2011 1 8400

1966 1 1600

Amd.1 2006 1 20800

1 1993 1 13600

1 2002 1 8000
2001 1 20800

1 1995 1 3200

Amd. 1 2004 1 2800

Amd. 1 2004 1 4800

1 2004 1 4800

2004 1 3200

2004 1 5600

1 2009 1 12000

2009 1 7600

2009 1 7600

1 2009 1 7600

1 2009 1 7600

1985 1 6400

2004 1 6400
2004 1 6000

Amd. 1 2004 1 6400

3 2005 1 8400

3 2005 1 8400

1966 1 3000

1966 1 3000

2008 1 14400
1997 1 3200
2 2002 1 11200

2014 1 22410

2011 1 16620

2.0 2003 1 8300

1.1 2009 1 12450

1 2002 1 5810

1 1999 1 3320

1 1999 1 3320

1 2002 1 3320
1 1994 1 5810

1 1997 1 5810

Edition Year
1 1972 1 8330

1 1999 1 8330

1 1999 1 8330

Amd-1 2004 1 8330

Amd-1 2008 1 16150

2002 1 24990

1997 1 16150

1994 1 13940

1 1999 1 8330
1990 1 4760

2012 1 16150

2015 1 16150

2006 1 8330

2000 1 8330

1997 1 3910

2000 1 3910

1997 1 4930
2000 1 8330

1997 1 8330

2000 1 19380

2003 1 8330

2008 1 9860

2008 1 8330

2006 1 9860

2006 1 9860

1999 1 8330

2003 1 8330

2003 1 8330

2005 1 9860

2002 1 8330

Amd. 1 2008 1 9860

2002 1 8330

2002 1 8330

2003 1 13940
2005 1 9860

1999 1 8330

1996 1 6970

Not in hand

Edition Year

88th Edition 1998 1 16000

1969 1 4000

1988 1 3000

Not in hand

1988 1 3000

4th 2010 1 6000


2001 1 5000

2001 1 3600
1995 1 4320
2002 1 4320
2000 1 3840

2004 1 3840

2004 1 4896

2001 1 4896

2003 1 3840

2001 1 4320

2002 1 3840

2002 1 3840
2002 1 3840

2002 1 3840

2004 1 4320

2008 1 4320

2004 1 4896

2001 1 3840

2001 1 4320

1999 1 4320

2000 1 4896

1999 1 6240

Total Price 870584

Vous aimerez peut-être aussi