Académique Documents
Professionnel Documents
Culture Documents
6.0
(7.8)
26.5-25 32PR L3 -112 (-247) -90 (-200) -80 (-175)
5.5 29.5-25 28PR L3 +352 (+776) +270 (+595) +240 (+530)
Bucket Capacity
(7.2)
5.0
29.5-25 28PR L5 +1,240 (+2,734) +960 (+2,160) +850 (+1,870)
(6.5)
29.5 R25 XHA* +500 (+1,102) +390 (+860) +340 (+750)
4.5
(5.9)
4.0
(5.2)
1,400 1,600 1,800 2,000 2,200 2,400 kg/m3 With Tier 3 Engine installed
2,000 2,500 3,000 3,500 4,000 lb/yd3
Material Density
HL780-9
HL780XTD-9
STANDARD EQUIPMENT
Electrical system - job time and distance - air conditioner & heater Engine fuel priming pump(Electric) Remote cooling fan,
Alternator, 70A - temperature(coolant, hydraulic - defroster 3 operating mode hydraulically-driven,
24-volt to 12-volt DC converter oil, t/m oil) - intermittent wiper and washer, (power / standard / econo) temperature sensing type
Alarms, audible and visual Lighting system front and rear Fan guard
- air filter clogging - 2 LED dome lights - personal storage space: Fuel/water separator Others
- transmission error - 2 stop and tail lights Console box Fuel warmer Articulation locking bar
- alternator voltage - 4 turn signals Holder, can and cup Muffler, under hood with large Coolant level sight gauge
- brake oil pressure - brake lights(counterweight) Rear view mirrors (2 inside) exhaust stack Counterweight
- engine oil pressure - 2 head lights on front tower Heated rear view mirrors Rain cap, engine air intake Door and cab locks, one key
- parking brake - 2 working lights on front roof (2 outside) Radiator Doors, service access(locking)
- fuel level - 2 working lights on grill Air suspension seat (heated) with Starting aid (air intake heater) Drawbar with pin
- hydraulic oil temperature Switches 3" seat belt Engine oil level dipstick gauge
- coolant temperature - clutch cut-off Steering column, tilt and Power Train Ergonomically located and slip
- service brake oil pressure - hazard telescopic Brakes : Service, enclosed wet-disc resistant, left & right
Batteries, 1,315 CCA, 12V, (2) - lgnition key, start/stop switch Steering wheel with knob Differentials, Hydraulic lock - front, - handrails
Gauges - main light(illumination and Roller type sunshade (front limited slip - rear - ladders
- engine coolant temperature head light) window) Parking brake - platforms
- fuel level - parking Tinted safety glass Torque converter - steps
- hydraulic oil temperature - rear wiper & washer Two door cab Transmission, computer-controlled, Fenders(front)
- speedometer - work light Magazine pocket electronic soft shift, auto-shift and Guard, bucket cylinder rod
- transmission oil temperature - master switch Pedals kick-shift features included Hydraulic oil level sight gauge
- voltmeter - pilot cut-off - one accelerator pedal Transmission oil cooler License plate bracket
Horn, electric Starter, electric - one brake pedal Lift and tie-down hooks
Indicator lights Starting and charging system(24- Radio/USB player Hydraulics Loader linkage, sealed
- clutch cut-off volt) Rubber floor mat Boom kickout, automatic Z-Bar design
- high beam Wrist rest Bucket positioner, automatic Steering stops, cushioned
- turn signal Cab Joystick with travel switch(FNR) Diagnostic pressure taps Tires(29.5-25, 22PR,L3)
- work light Cab, ROPS/FOPS Hydraulic oil cooler Transmission oil site level
LCD Display (sound suppressed and Engine Hydraulic system, Vandalism protection caplocks
- clock and fault code pressurized) with : Antifreeze - 2 spool, single lever, pilot control 3 piece cutting edge, bolt-on type
- operating hour counter - cigar lighter & ashtray Engine, Cummins QSM11 for boom and bucket actuation HI-Mate(Remote Management
- engine rpm - coat hook - Low Emission Diesel, Tier3 - 3rd spool for auxiliary function System)
- transmission gear range indicator Automatic climate control Engine enclosure, lockable Steering, load-sensing Rearview camera
optional EQUIPMENT
3 Spool Dual brake pedal Hydraulic control, 3 lever - 3” static seat belt & adjustable Tooth, 1 piece, bolt-on type
Climate control Secondary steering system Operator suit mechanical suspension Tooth, 2 pieces, bolt-on type
- air conditioner only Fenders(rear) Pallet forks Tires : Wheel chock
- heater only Fire extinguisher Reversible cooling fan - 29.5 - 25, 28PR L3 Pre-cleaner, engine air intake
Beacon light, rotating High lift arrangement with Ride control system - 29.5 - 25, 28PR L5 Joystick-steering
Lighting, auxiliary, 4 on front roof additional counterweight, Seat - 26.5 - 25, 32PR L3 Roller type sunshade (rear window)
(2 Xenon work lights) 552kg(1,210lb) - 2” static seat belt & adjustable - 29.5 R25 XHA* License plate & lamp
Lighting, auxiliary, 4 on rear roof Hydraulic control, 2 lever mechanical suspension (vinyl) Tool kit
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.
All imperial measurements rounded off to the nearest pound or inch.
PLEASE CONTACT
Axle
Hydraulically lockable front differential and limited slip rear differential for easy driving on variable ground condition
Self-adjusting & wheel speed brake
Improved Durability
Load sensing hydraulic system with variable displacement piston pump and closed-center MCV (main control valve).
Long-life cooling system, designed for additional durability, resistant to thermal shock, impulse and vibration.
Redesigned steering cylinder lug and bucket link, now cast steel for additional strength and reliability.
Improved Convenience
Increased cooling & heating capacity with fully automatic climate control system.
Tilting & telescopic steering column.
Adjustable wrist rest for reduced operating stress.
Multiple storage compartments.
AM/FM Radio with MP3 interface and USB input.
Improved ladder with 20 Degree incline and large, deep tread, aluminum cast steps for safer access and exit from the cab.
Serviceability
Reversible, swing-out, cooling fan for easy service and improved cooler maintenance.
Ground level access to critical service points, filters and sight gauges for easy maintenance.
Long life hydraulic filter and oil for reduced operating costs.
2/3
In the 9 series cabin you can easily adjust the steering column and wrist rest to best suit
Operator Comfort your preferred comfort level. Pilot-operated joystick controls are easy and comfortable to
Operator Comfort operate. An FNR (Forward/Neutral/Reverse) switch on the control lever facilitates easy
selection of travel direction. Roller type sunshades on the front window and rear window allow the operator to reduce
glare and improve visibility. Heated side mirrors feature built-in hot wires for quick defrosting during cold weather
conditions.
Operating a 9 series wheel loader is unique to
every operator. Operators can fully customize
40˚
their work environment and operating
80mm
preferences to fit their individual needs.
Wrist rest FNR switch Front sunshade Heated AM/FM Radio with
side mirrors MP3 / AC control
Reduced Stress
Work is stressful enough. Your work environment should be stress free. Hyundai's 9 series cabin offers lots of amenities,
additional space and a comfortable seat to minimize stress to the operator. A powerful climate control system provides the
operator with optimum air temperature. An advanced audio system with AM/FM stereo with MP3 interface and USB input,
plus remotely located controls is perfect for listening to music favorites.
o
15
Horizontal
o
Total : 30
o
7
*Photo may include optional equipment.
Vertical
Total : 14o
Spacious and Convenient Cab
The newly designed cabin was conceived for more space, a wider field of view and operator
o
comfort. The front windshield is rounded and 17% wider than the previous 7A series. Special CCW : 540
attention was given to a clean, open and convenient interior with plenty of visibility on the
machine surroundings and the job at hand. This well balanced combination of cab ergonomics
puts the operator in the perfect position to work safely and securely. The 9 series cab's fully
automatic climate control system features 11 air vents and increased cooling and heating
CW : 540o
capacity for optimum temperature control. The defroster vents located on the front and rear
windows and a PTC (electric pre-heater) make working in cold weather more hospitable.
4/5
Precision & Performance Improved Durability & Reliability
The new load sensing hydraulic system with a variable volume piston pump and closed
Innovative hydraulic system technologies make the 9 series wheel loader fast, smooth and center main control valve, provide efficient hydraulic power and additional energy savings.
easy to control. 9 series wheel loaders are designed for maximum performance to keep the Service and clean-out are easier on the 9 series, now equipped with a completely
operator working productively. redesigned, parallel-mounted, cooler configuration and non louvered fins to prevent
clogging. All coolers are designed with aluminum bar plate configuration and undergo strict
factory tests for thermal shock, impulse and vibration to assure long term durability. Top
mounted non-louvered aluminum air condenser and variable displacement A/C compressor
are designed for maximum cooling capacity, energy savings and easy clean-out. Additionally,
the redesigned steering cylinder lug and bucket link, are now cast steel for additional
strength and reliability.
The CUMMINS QSM11 electronic control engine combines full- Fully automatic transmission designed for maximum durability,
authority electronic controls with the reliable performance. Minimum power loss, improved travel speed and low noise.
The combination of improved airflow and evenly dispersed fuel Improved clutch control and minimized shifting shock when
results in increased power, improved transient response and traveling, contribute to a smoother ride. Error messages and
reduced fuel consumption. And the QSM11 uses advanced transmission fault history are recorded and accessible through
electronic controls to meet the emission standards. the monitor.
(EPA Tier-3, EU StageIII-A)
*Photo may include optional equipment.
6/7
Profitability
The 9 series is designed to maximize profitability through improved efficiencies,
enhanced service features and longer life components.
8/9
Specifications & Dimensions
Engine brakes steering system
Maker/Model CUMMINS QSM11 Bore x Stroke 125 mm (4.9”) x 147 mm (5.8”) Service Brakes Hydraulically actuated, wet disc Type Load sensing hydrostatic articalated steering
brakes actuate all 4 wheels
4-cycle, turbocharged, Displacement 10.8ℓ(660 cu in) Pump Piston, 220 liters/min
Type independent axle-by-axle system.
charge aircooled direct injection, (58.1 gal/min)
Compression ratio 16.3 : 1 Self adjusting & wheel speed brake.
electronic controlled diesel engine
Relief Valve Setting 210 kg/cm2(2,990 psi)
Air cleaner Dry, dual elements Parking Brake Spring-applied, hydraulically released
Gross power 348HP(260 kW) / 2,000rpm
Cylinder Type Double acting
Alternator 24V, 70 Amp disc brake on front axle input shaft
Net power 344HP(257 kW) / 2,000rpm Bore x Stroke 105mm(4.1") x 480mm(18.9")
Battery 2 x 12V, 220 Ah. Emergency Brake When brake oil pressure drops,
Maximum torque 171kg.m(1,235 lb.ft) / 1,400rpm indicator light alerts operator and Steering Angle 40o(each direction)
Starting motor 24V, 7.5 kW
No. of cylinders 6 parking brake automatically applies.
Features
※No derating for continuous operating required up to 3,048m (10,000ft). This engine meets the EPA(Tier III) / EU(Stage III-A) Emission regulation. - Center-point frame articulation. - Load-sensing, pressure-compensated system.
- Steering-wheel operated metering pump controls flow to steering cylinders.
- Tilt and telescopic steering column.
Transmission service refill capacities
3-elements, single-stage Travel speed km/h (mph)
Torque converter type Fuel tank 450 liters (118.8 USgal) Front axle 58 liters (15.3 USgal)
Double-phase
Forward 1st 6.1(3.8)
Cooling system 65 liters (17.2 USgal) Rear axle 58 liters (15.3 USgal)
Tire 29.5-25, L3 2nd 11.5(7.1)
Crankcase 38 liters (10.0 USgal) Hydraulic tank 234 liters (62 USgal)
※Full automatic power shift, countershaft type with soft-shift in range and 3rd 18.0(11.2)
direction. Properly matched torque converter to engine and transmission for Transmission 43 liters (11.4 USgal) Hydraulic system (including tank) 344 liters (90.8 USgal)
excellent working ability 4th 36.5(22.7)
Reverse 1st 6.1(3.8) overview tires
2nd 11.5(7.1) Description UNIT HL780-9 HL780XTD-9 Type Tubeless, loader design tires
Operating weight kg (lb) 30,000 (66,100) 30,800 (67,900)
3rd 25.0(15.5) Standard 29.5-25, 22 PR, L3
Heaped m3(yd3) 5.4 (7.1) 5.4 (7.1)
Bucket capacity
Struck m3(yd3) 4.6 (6.0) 4.6 (6.0) Options include 26.5-25, 32 PR, L3
29.5-25, 28 PR, L3
Axles Breakout force-bucket kg (lb) 23,750 (52,360) 23,130 (50,990)
29.5-25, 28 PR, L5
Straight kg (lb) 24,200 (53,350) 21,500 (47,400)
Tipping load 29.5 R25 XHA*
Drive system Four-wheel drive system Hub reduction Planetary reduction at wheel end Full turn kg (lb) 21,000 (46,300) 18,500 (40,790)
Mount Rigid front axle and oscillating rear axle Differential Front hyd. lock, rear conventional
Rear axle oscillation ±13o (total 26o) Reduction ratio 27.0
Dimensions
hydraulic system
Type Load sensing hydraulic system Bucket Type Pilot operated lift and tilt circuit,
M M
Controls single-lever(joystick) control standard.
Pump Variable axial piston pump, 420 liters/min E B B
E
Lift Circuit The valve has four functions ;
(111.0 gal/min)@governed rpm F
F
raise, hold, lower and float. K
A L L
K
Control valve 2 Spool (Bucket, Boom) J
Can adjust automatic kickout from
J
3 Spool (Bucket, Boom, Aux) horizontal to full lift.
Tilt Circuit The valve has three functions ; I
Pilot pressure controled type
I
C G G H H
tilt back, hold and dump. N N
C
System pressure 280 kgf/cm2 (3,982 psi) D D
Can adjust automatic bucket
positioner to desired load angle.
Description
UNIT HL780-9 HL780XTD-9 Description
UNIT HL780-9 HL780XTD-9
Cylinder Type : Double acting
Bucket Type General purpose bolt-on cutting edge G. Front overhang mm (ft-in) 3,200 (10’ 6”) 3,575 (11’ 9”)
Lift, bore x stroke
A. Dumping clearance at max. H. Wheelbase mm (ft-in) 3,700 (12’ 2”) 3,700 (12’ 2”)
2-180 mm(7.0") x 863 mm(34.0") mm (ft-in) 3,300 (10’ 10”) 3,670 (12’)
height and 45o dump angle. I. Ground clearance mm (ft-in) 495 (1’ 7”) 495 (1’ 7”)
Tilt, bore x stroke
B. Reach
Full lift mm (ft-in) 1,430 (4’ 8”) 1,480 (4’ 10”) J. Height over exhaust mm (ft-in) 3,310 (10’ 10”) 3,310 (10’ 10”)
HL780-9 2-140 mm(5.5") x 575 mm(22.6")
7ft height mm (ft-in) 2,150 (7’ 1”) 2,470 (7’ 11”) K. Height over cab mm (ft-in) 3,865 (12’ 8”) 3,865 (12’ 8”)
HL780XTD-9 2-140 mm(5.5") x 570 mm(25.4")
C. Digging depth mm (in) 105 (4.1”) 115 (4.5”) Roll-back angle (on ground/at carry)
L. deg 42 / 48 42 / 49
Cycle Time Raise : 6.1 sec (with load) on ground mm (ft-in) 9,630 (31’ 7”) 10,060 (33’) M. Dump angle deg 47 47
D. Overall length
Dump : 1.4 sec at carry mm (ft-in) 9,545 (31’ 4”) 9,990 (32’ 9”) Clearance circle mm (ft-in) 14,970 (49’ 1”) 15,310 (50’ 3”)
Lower : 4.1 sec (empty) E. Overall height (fully raised) mm (ft-in) 6,295 (20’ 8”) 6,670 (21’ 11”) with bucket mm (ft-in) 3,450 (11’ 4”) 3,450 (11’ 4”)
N. Overall width
Total : 11.6 sec F. Bucket pivot max. height mm (ft-in) 4,560 (15’) 4,935 (16’ 2”) without bucket mm (ft-in) 3,220 (10’ 7”) 3,220 (10’ 7”)
10/11