Académique Documents
Professionnel Documents
Culture Documents
SOLUTIONS
product innovation and leadership, as well as exceptional customer service.
The reputation of Kentrox was built on our Data Service Unit/Channel Service Unit (DSU/CSU) product line. We pioneered
multi-service access concentrator technology in 1993, which was used in our successful line of AAC™ products that connect
voice, video and data traffic with public ATM services and private WANs.
In 2004, Kentrox developed the Q-Series™ line of QoS access products to address the growing need for quality-of-service
for converged IP networks. Q-Series provides the industry’s first affordable, easy-to-use, quality-of-service solutions to
small/medium businesses and branch offices. And leveraging our experience supplying CSUs and cross-connects to wireless
networks since 1989, Kentrox developed the CrossPATH® 3G in 2005 for deployment in high-density wireless base stations.
Kentrox headquarters, including our customer service and technical support teams, is located in Hillsboro, Oregon,
with regional sales offices located throughout the United States. Kentrox solutions are sold through a network of VARs,
distributors, carriers and system integrators.
Table of Contents
2 Kentrox Solutions 31 CSUs
2 Kentrox Network Access Product Matrix 32 M-PATH™ T1, Stand-alone and 2-slot shelf
3 VoIP Solutions 33 M-PATH™ T1, 12-slot shelf
4 QoS Solutions 34 T-SMART® T1
5 VPN Solutions 35 T-SERV® II T1
6 Frame Relay Solutions 36 Satellite™ 931 T1
7 ATM Solutions 37 Wireless Access
8 Wireless Base-station Solutions
38 Wireless Access Product Overview
9 QoS Access Routers 39 CrossPATH® 3G T1 Cross Connects
10 Q-Series™ Overview 40 CrossPATH® IIe Triple T1 with Ethernet
11 Q-Series™ Functionality 41 M-PATH™ T1
12 Q-Series™ Graphical Web Interface 42 T-SMART® T1 and T-SERV® II T1
14 Q2200 T1 QoS Access Router 43 ATM Access Concentrators
15 Q2300 Ethernet QoS Access Router
44 ATM Access Concentrator Overview
16 Q2400 Dual T1/Ethernet QoS Access Router
45 Kentrox Access Concentrators
17 DSU/CSUs 46 AAC-3® and AAC-2™
18 DSU Overview 47 AAC-3® and AAC-2™ Ordering Information
19 DSU Software 49 Inverse Multiplexers
20 DataSMART® 696/698 T1 Frame Monitoring
50 CellSMART® 200 Series
21 DataSMART® T3/E3 IDSU
22 DataSMART® 656/658 T1 51 Service and Support
23 DataSMART® 554/558 T1 Plug-ins 52 Kentrox Commitment to Customer Care
24 DataSMART® 456/458 E1 53 Kentrox Care Plan Feature Matrix
25 DataSMART® T1 MAX™ Dual-ports and Quad-port 54 Kentrox Care Plan Descriptions
26 CrossPATH® II Triple T1, AC 56 Kentrox Care Plan Ordering Information
27 DataSMART® E1 MAX Dual-port 57 Kentrox Care Installation Services
28 DataSMART® 552 56/64k 58 Technical Training
29 Satellite™ 651 T1 59 Price List
30 D-SERV® T1 and D-SERV® II 56/64k 60 Access Equipment Price List
62 Kentrox Care Service and Support Price List
64 Cable Price List
800-733-5511
www.kentrox.com
1
KENTROX SOLUTIONS
Access Equipment
QoS Access DSU/CSUs CSUs Wireless Access Inverse
Routers Access Concentrators Multiplexers
56/64k D-SERV II 56/64k
DataSMART 552
T1/FT1 Q2200 D-SERV T1 M-PATH CrossPATH 3G AAC-3
Q2400 Satellite 651 T-SERV II CrossPATH IIe AAC-2
DataSMART 696, 698 T-SMART M-PATH
DataSMART 656, 658, Satellite 931 T-SERV II
554 and 558 T-SMART
DataSMART T1 MAX
CrossPATH II Triple T1, AC
E1/FE1 DataSMART 456, 458 AAC-3
DataSMART E1 MAX AAC-2
NxT1/E1 AAC-3 CellSMART 200
AAC-2
T3/E3 DataSMART T3/E3 IDSU AAC-3
AAC-2
OC-3/STM-1 AAC-3
AAC-2
ATM AAC-3 CellSMART 200
AAC-2
Frame Relay Q2200, Q2400 D-SERV AAC-3
Satellite 651 AAC-2
DataSMART
DataSMART MAX
CrossPATH II
Ethernet Q2300, Q2400
DSL/Cable Q2300, Q2400
2 800-733-5511
KENTROX SOLUTIONS
VoIP Solutions
I am considering adopting voice over IP for business, but I’m concerned about
SOLUTIONS
call quality. How do I protect the quality of calls running on the same line as my
data applications?
VPN Tunnel A
Q2300
T1
Q2400
Cable or DSL Public Internet
Modem
Q2200 T1
IP Phone T1
VPN Tunnel B
PSTN
IP PBX with FT1
Access to PTSN
Voice over IP (VoIP) is one of For example, if voice calls are running over the same link as web or email traffic,
the most significant technology a large web page download may surge and block out voice traffic. Delay and
shifts in telecommunications dropped packets may not noticeably affect the quality of data traffic, but can be
in years. It has the potential to devastating to the quality of a voice call.
deliver considerable cost savings
To ensure VoIP gets the necessary bandwidth for quality performance, businesses
to customers by leveraging the
should select an access router with the functionality of a Quality-of-Service
efficiencies of IP communications.
(QoS) appliance.
Many of today’s companies are
considering VoIP because of these
potential savings, which may be Kentrox Solutions for Quality VoIP
even greater when voice and Kentrox offers the Q-Series QoS Access Router to help businesses protect VoIP
data traffic are converged over a call quality, automatically. Right out of the box, the Q-Series router prioritizes
single IP infrastructure. However, VoIP traffic marked with IP QoS classifications, using DiffServ or Type of Service
as businesses consider converging (ToS). This prioritization ensures voice traffic gets the bandwidth required for
voice and data over IP services, quality performance. Additionally, users can implement QoS policies to further
they often are concerned with optimize and control network traffic. Using the Q-Series graphical QoS reports,
quality degradation of their voice customers can then easily monitor network traffic to see whether VoIP and other
calls. This quality can easily be traffic is performing as expected and tweak settings as necessary.
adversely affected by other traffic
running on the same WAN line. Kentrox VoIP Alliances:
www.kentrox.com 3
KENTROX SOLUTIONS
4 800-733-5511
KENTROX SOLUTIONS
VPN Solutions
Our company is looking for a lower-cost solution for our site-to-site communications.
SOLUTIONS
Our private network is too expensive, yet provides the security we need. If we move to
a dedicated Internet network, how do we maintain security?
www.kentrox.com 5
KENTROX SOLUTIONS
T1/FT1 T1/FT1
DataSMART 696
Router
Frame
Relay Router
T1 Services T3/E3
Router Q-Series Q2400
AAC
T1/E1 T3/E3 Router
As the most commonly deployed Kentrox Solutions for Frame Relay Access
data service for corporate networks, Kentrox offers a suite of product families for deployment at the edge of your
Frame Relay provides efficiency and Frame Relay network. From 56/64k to T3/E3, our basic, managed, frame
cost-effectiveness to businesses monitoring and integrated solutions provide the reliability and feature sets
worldwide. But different locations your business requires for each location in your network.
within an organization have varying
needs for Frame Relay access Kentrox basic DSU/CSUs offer the most economical option for Frame Relay
equipment and other functionality. access, while our managed DataSMART DSU/CSUs provide central offices with
Remote sites with existing routers monitoring and management of remote sites. For monitoring the health of the
require a highly reliable DSU/CSU Frame Relay circuit, our Frame Monitoring DSUs are the ideal choice. These
that can be accessed and managed products can verify Service Level Agreements (SLAs), measure bandwidth usage,
remotely. For a new office, an and monitor network availability, congestion, delay and data delivery rates.
integrated solution may make the
Kentrox’s integrated solution, the Q-Series QoS Access Router, integrates an IP
most sense.
router, T1/FT1 DSU/CSU, VPN appliance, QoS appliance, firewall and Ethernet
switch into a single device. This feature-rich product is ideal for connecting
new offices to the Frame Relay network quickly and inexpensively, as well as
for upgrading obsolete routers in existing locations.
6 800-733-5511
KENTROX SOLUTIONS
ATM Solutions
We are running videoconferencing over our wide-area network in addition to
SOLUTIONS
voice and data applications. How do I combine these various traffic types over
a single, efficient network?
Router
NxT1/E1
ATM or IMA
Frame Relay HSSI
Private
MUX
Asynchronous Transfer Mode As the most popular service for high-speed networks, public and private ATM
(ATM) is a fixed-packet, cell-based networks are used worldwide by large, enterprise companies. With ATM,
technology designed to provide a businesses can efficiently and reliably transport traffic at speeds from NxT1
common switching fabric capable IMA (Inverse Multiplexing over ATM) up to OC-3.
of integrating data, voice and
video services. ATM combines the Kentrox ATM Access Solutions
statistical multiplexing efficiencies Kentrox ATM products support public and private ATM networks, as well as
of packet switching with the low existing services, such as Frame Relay and leased-line traffic. They provide all
delay characteristics of circuit the enhanced capabilities of ATM technology, as well as providing protection
switching technologies. So voice for your investment in existing network equipment. The products support both
and video can run on the same enterprise and carrier ATM applications, with an array of supported protocols,
infrastructure as data without speeds and interfaces for maximum flexibility.
sacrificing quality. Additionally,
ATM provides dynamic bandwidth
allocation for more efficient
handling of traffic, dynamically
assigning transmission capacity
when needed for bursty data,
predictable data, and all other
traffic types, including voice
APPLICATION PRODUCT PAGE
and video.
Enterprise access to AAC-3 46-48
a public ATM service; AAC-2 46-48
Private ATM network;
Carrier provisioning of
ATM service
www.kentrox.com 7
KENTROX SOLUTIONS
Base Station
2G Radios 3G Radios
Fractional
To MSC T1s (DSX-1)
To MSC
CrossPATH 3G
V.35
To MSC
Multiple T1 backhaul
8 800-733-5511
QoS Access Routers
QoS ROUTERS
• Q-Series Q2200
• Q-Series Q2300
• Q-Series Q2400
9
QoS ACCESS ROUTERS
Today’s small-to-medium
businesses (SMBs) are investing
in new technologies and
applications to help them
increase productivity, improve
QoS ROUTERS
10 800-733-5511
QoS ACCESS ROUTERS
Business-class QoS Appliance Firewall with VPN WAN Access Device Managed Ethernet
IP Router Traffic reports and graphs VPN T1 DSU/CSU Switch
Network Address Auto DiffServ/ToS priority 100 IPSec tunnels (Q2200, Q2400) Four 10/100 Ethernet ports
QoS ROUTERS
Translation (NAT) queuing Encryption (DES, 3DES, AES) Frame monitoring Auto-sensing, auto-polarity
Mapped IP Class-based Weighted Fair Hardware acceleration for Alarms and diagnostics Multiple subnets with VLAN
Easy-to-use embedded GUI Queuing DES/3DES SNMP
Intuitive CLI for scripting User-selectable QoS policies Digital Certificates Frame Relay and PPP support
IP routing – Static, RIP, Prioritization of VoIP and
OSPF and BGP* video
SPI Firewall Ethernet WAN Port
DHCP, DHCP Relay QoS over VPN
Packet filtering (access control (Q2300, Q2400)
lists)
Bandwidth monitoring and
Intrusion Detection System (IDS) control
Denial of Service (DoS) protection Alarms and diagnostics
Application Layer Gateways SNMP
DMZ support PPPoE
Secure, Cost-effective Networking with Easy Installation and Setup with Graphical
Internet VPNs Web Interface
Many small/medium businesses are choosing to set up Traditional routers, security devices, and network access
Virtual Private Networks (VPNs) to take advantage of the equipment can be difficult to set up, and often require
lower cost of IP services. With its integrated VPN appliance, special training. This can be problematic for many small
the Q-Series router enables businesses to set up secure, businesses and branch offices that do not have onsite
cost-effective networks over the Internet. And Q-Series technical expertise. Kentrox Q-Series routers include a
provides scalability by securing up to 100 VPN tunnels with graphical user interface (GUI), making installation faster
standards-based IPSec encryption and authentication. and easier for both network administrators and less
experienced staff. This web-based, graphical interface is
Intrusion Protection for Internal Systems simple, intuitive and requires no special training.
With the rapid increase in Internet utilization and network-
related technologies, it is essential that businesses protect
their internal systems from outside security breaches. To
help companies reduce the risk of unwanted intrusions,
the Q-Series router includes an integrated Stateful Packet
Inspection (SPI) firewall. The firewall includes Denial
of Service (DoS) and Intrusion Detection System (IDS)
capability, which identifies and blocks the most common
attacks. Application Layer Gateways (ALGs) pass common
traffic types while preventing unwanted traffic from
entering the LAN.
www.kentrox.com 11
QoS ACCESS ROUTERS
The Daily Historical Network Usage graph displays Prioritize critical applications, like VoIP, by adding a
circuit utilization based on DiffServ class. QoS Policy.
Monitor traffic with the real-time Policy Report to ensure Also check the daily and weekly policy reports such as
QoS policies are protecting prioritized applications. VoIP Policy Statistics.
12 800-733-5511
QoS ACCESS ROUTERS
VPN
QoS ROUTERS
Firewall
WAN Configuration
www.kentrox.com 13
QoS ROUTERS, T1
Relay networking over T1 or fractional T1 services. Ideal for small-to-medium businesses, the
• Easy-to-interpret graphs and Q2200 includes an IP router, QoS appliance, VPN appliance, firewall, T1 DSU/CSU and Ethernet
charts show network activity switch – all in a single, affordable device. With this integrated networking solution, customers
at a glance need only purchase, install, set up and manage one device instead of up to six, significantly
reducing capital and ongoing expenses.
• VPN appliance supports up to
100 VPN tunnels To further reduce cost-of-ownership, the Q2200 includes a graphical web interface for simplified
setup and management. This easy-to-use GUI is intuitive and requires no special training.
• SPI firewall provides secure
business networking Q220x
• Managed 10/100 Ethernet
switch provides connectivity
for multiple workgroups A B C D
14 800-733-5511
QoS ROUTERS, Ethernet
QoS ROUTERS
setup and management The Q2300 QoS Access Router makes low-cost broadband services practical for businesses.
Until now, business-class routers have been expensive and complex to set up and use, while
• Easy-to-interpret graphs and consumer-level DSL and cable routers have lacked business-quality monitoring, control, and
charts show network activity security capabilities. The Q2300 router changes all this by offering significantly more features
at a glance appropriate for a small or medium business.
• VPN appliance supports up to With the Q2300, customers get the functions of an IP router, QoS appliance, VPN appliance,
100 VPN tunnels firewall, and Ethernet switch – all in a single, affordable device. And the Q2300 router is
designed to be easy enough for less experienced staff to install and set up. It includes a
• SPI firewall provides secure graphical web interface that is simple, intuitive and requires no special training.
business networking
Q230x
• Managed 10/100 Ethernet
switch provides connectivity
for multiple workgroups
A B C D
• Ethernet WAN port provides
alarms and diagnostics
ORDERING INFORMATION SPECIFICATIONS
Description Part No. Interfaces
Q2300 Ethernet QoS Access Router 2300 WAN 10/100Base-Tx (RJ45)
Q2301 Ethernet QoS Access Router with Modem 2301 LAN Four-port 10/100 Switch (RJ45)
BACK PANEL AND CABLE GUIDE Q-Series 19” Rack Mounting Kit 77912 Control CLI RS-232 (RJ45)
A Ethernet Ports Kentrox Care Installation Services Modem (Q2301) V.92 (RJ11C) for dial-in management
RJ45 Plug to RJ45 Plug, Cat 5E (UTP568B), Q-Series Onsite Installation 13820 User Intuitive Web-style GUI and CLI
6 Feet 93006212* Q-Series Phone Installation 13830 IP Router
B Network Port Kentrox Care Q-Series Support Plans Routing Static, RIP, OSPF, BGP*
RJ45 Plug to RJ45 Plug, Cat 5E (UTP568B) 930xx212 Onsite 7x24x4 13803 DHCP server, client, relay
C Modem Port (Q2301 only) Onsite 5x8x4 13813 DNS client, relay
RJ11 Plug to RJ11 Plug 930xx210 Onsite 7x24xNBD 13802 PPPoE
D Control Port Onsite 5x8xNBD 13812 VLAN-up to 8 subnets
RJ45 Socket to DE9S Adapter 77910* Basic 7x24xNBD 13804 Virtual Private Network
(CLI Serial to PC Adapter; for use with Ethernet cable) Exchange NBD 13809 IPSec 100 IPSec VPN tunnels
RJ45 Plug to RJ45 Plug, Cat 5E (UTP568B) 930xx212 Software 13810 Encryption DES, 3DES, AES
Kentrox Care Training Digital Certificates
* Ships with unit
Q-Series Basic Configuration and Quality of Service
NOTE: xx denotes length of cable, contact factory for Maintenance Lecture 133851 QoS Methods Auto DiffServ/ToS-based priority queuing
available lengths. P = Plug (male); S = Socket (female). Q-Series Advanced Configuration and Class-based Weighted Fair Queuing
Maintenance Lecture 133852 32 user-configurable QoS policies
Firewall
Protection Stateful Packet Inspection, DoS,
Methods Intrusion Detection and Prevention,
Blacklist, NAT, ALG, TCP/UDP packet
filtering
Physical
Dimensions 1.6”H x 11.8”W x 8.6”D
Power 100-240 AC, 50-60 Hz, .20W
www.kentrox.com 15
QoS ROUTERS, Multi-port
16 800-733-5511
Data Service Units (DSUs)
• DataSMART
• DataSMART MAX
• Satellite
• D-SERV
17
DATA SERVICE UNITS
Managed DSU/CSUs
Take active control of your network – from anywhere in your network – with Kentrox managed
DSU/CSUs. These products include in-band access for simplified remote management, Ethernet
and front-panel LCD for easy local management and standards-based SNMP management.
Basic DSU/CSUs
When all you need is highly reliable termination, the Kentrox line of Satellite and D-SERV
DSU/CSUs are your most economical solution. Our basic DSU/CSUs are ideal for networks
where there are no requirements for remote diagnostics or centralized management.
18 800-733-5511
DSUs, Software
DSU/CSUs
DataSMART Installer is an intuitive, Windows-based setup and
diagnostics utility, included free with any T1 or E1 DataSMART
DSU/CSU. With DataSMART Installer, you can easily maintain and
update DataSMART configurations and channel assignments. The
utility also performs troubleshooting, such as loopbacks, with a
click of the mouse.
Alarms Utility
The Alarms Utility integrates DataSMART DSU monitoring into
HP OpenView® Network Node Manager. Custom icons for the
topology map uniquely identify DataSMART devices, allowing
you to verify network layout. The Alarms Utility continuously
monitors for interface and device errors, and posts any errors
to the HP OpenView alarm log.
www.kentrox.com 19
DSUs, FR Monitoring, T1
Carrier Network
DataSMART
T1 FR
698
T1/FT1
DCS
Vertical Shelf
DataSMART 696 DataSMART 698
A C D E A B C D E
20 800-733-5511
DSUs, Managed, T3/E3
• Enterprise network backbone The DataSMART T3/E3 IDSU provides economical and flexible access for bandwidth-intensive
connectivity Frame Relay and high-speed, router-based applications, such as Internet access and corporate
LAN traffic.
• HSSI and V.35/EIA-530 data
ports For maximum flexibility, the DataSMART IDSU data ports support full T3/E3 bandwidth and
variable clock rates in Nx.5 Mbps increments, allowing you to connect a variety of data or
• Selectable data port clock video equipment to your network.
rates for flexible connectivity
An embedded SNMP agent supports standard MIBs, SNMP Traps, Telnet and Pings, providing
• Embedded SNMP and Telnet a wide range of network management capabilities.
for advanced network
management
• 5-year warranty
DSU/CSUs
DataSMART T3/E3
A B C D E
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A To Control Terminal E Power Source (AC or DC option available, specify Power
EIA-561 to EIA-561 (EIA-232D), 14 Feet 93014241* type when ordering) DC 48VDC, 20 Watts nominal,
DB25P to RJ45 Jack Adapter 78892 US Power Cord 90000 25 Watts Max
DE9S to RJ45 Jack Adapter 78899* EC Power Cord 90001 AC 100-240VAC, 24 Watts nominal,
B To Data Equipment UK Power Cord 90002 30 Watts Max
EIA-530 Italy Power Cord 90003 T3 Network Interface
DB25P to DB25P 950xx061 * Ships with product
Line Rate 44.736 Mbps
DB25P to DB25P (DCE to DCE), 10 Feet 95010058 Framing M13 or C-bit Parity
NOTE: xx denotes length of cable, contact factory for
DB25P to DC37P (EIA-530 to RS449), Line Code B8ZS
available lengths. P = Plug (male); S = Socket (female).
10 Feet 95010066 Input Signal +6.2 dBm to –11.7 dBm
DB25P to DC37S (EIA-530 to RS449) 950xx042 Output Signal DSX-3
X.21 ORDERING INFORMATION Impedance 75 ohm coax
DB25P to DA15S, X.21 Adapter 78902 Connector BNC socket or 1.6/5.6 DIN
V.35 Description Part No.
E3 Network Interface
DB25P to MRAC34P 950xx054 DataSMART T3/E3 IDSU, AC 15951
Line Rate 34.368 Mbps
DB25P to MRAC34P (DCE to DCE), 10 Feet 95010073 DataSMART T3/E3 IDSU, DC 15952
Framing per ITU-T G.751
DB25P to MRAC34S Adapter Cable, 1 Foot 95001074 Kentrox Care Support Plans Line Code HDB3
DB25P to MRAC34S Adapter 78904 See page 56 for a full list of available support plans. Input Signal per ITU-T G.703
C To HSSI Output Signal per ITU-T G.703
HSSI Plug to HSSI Plug 960xx011 Impedance 75 ohm coax
D To Network, 2 cables required Connector BNC socket or 1.6/5.6 DIN
BNC Plug to BNC Plug 960xx010 Synchronization Network or internal clock
Physical
Dimensions 1.7" H x 16.75" W x 11.00" D
4.32 cm H x 42.55 cm W x 27.94 cm D
www.kentrox.com 21
DSUs, Managed, T1/FT1
NMS
V.35
In-band
Ethernet Management
Management T1/PRI
from a T1/PRI PBX and data or Internet traffic onto a single T1/FT1 line, reducing monthly
• 5-year warranty WAN access charges.
Vertical Shelf
DataSMART 656 DataSMART 658
A C D E A B C D E
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A To Network D To Data Equipment (V.35) Power
DA15S to DA15P 930xx091 MRAC34P to MRAC34P 950xx052 AC 120VAC, 60 Hz, 8W
DA15S to Stub 930xx111 MRAC34P to MRAC34P, DCE to DCE, 10 Ft. 95010055 Network Interface
DA15S to RJ48C Plug 930xx151 E To 10Base-T LAN Line Rate T1/PRI (1.544 Mbps)
DA15S to RJ48C Jack Adapter 77891* RJ45 Plug to RJ45 Plug, Cat. 5E UTP, 6 Feet 93006212 Framing SF, ESF, Ericsson
B To Terminal Equipment (DataSMART 658) Line Code AMI, B8ZS
NOTE: xx denotes length of cable, contact factory for
DA15P to Stub 930xx101 available lengths. P = Plug (male); S = Socket (female).
Input Signal DS1 from 0 dB to -27 dB, typical
DA15P to DA15S 930xx091 Output Signal DS1 with LBO 0, -7.5, -15 dB
DA15P to RJ48C Plug 930xx121 (selectable)
DA15P to DA15P 930xx131 ORDERING INFORMATION Mechanical DA15 plug
DA15P to DA15P, DCE to DCE, 10 Feet 93010132 Terminal Interface (DataSMART 658)
Description Part No.
DA15P to RJ48C Jack Adapter 77892* Line Rate T1/PRI (1.544 Mbps)
DataSMART 656 T1 DSU/CSU 72656
C To Control Terminal Framing SF, ESF, Ericsson
DataSMART 658 T1 Add/Drop DSU/CSU 72658
DE9S to DE9P, 6 Feet 95006022 Shelves and Mounting Accessories Line Code AMI, B8ZS
DE9S to DB25P, 5 Feet 95005023 Mounting Tray, one Unit 78031 Input Signal DSX-1 to -10 dB
Center Support for two 78031 Mounting Output Signal DSX-1 with equalization
*Ships with unit. Mechanical DA15 socket
Trays, 19 inch Rack 78031200
Center Support for two 78031 Mounting Physical
Trays, 23 inch Rack 78031300 Usage Desktop or tray mount
Vertical Mounting Shelf for 9 Stand-alone Units 78032 Dimensions 7.75" W x 1.65" H x 11.5" D
Kentrox Care Support Plans
See page 56 for a full list of available support plans
22 800-733-5511
DSUs, Managed, T1/FT1
Manage and grow your enterprise network with the DataSMART 554 and the DataSMART 558
T1 Single-port Plug-in DSU/CSUs. These DSU/CSUs are designed for high-density T1/FT1 net-
work installations. They support rapid expansion capabilities and comprehensive management
options appropriate for central offices, corporate and government networks.
The DataSMART Plug-ins offer auto-configuration for fast provisioning of additional circuits
in rapidly growing environments. Combined with the DataSMART Installer, this eliminates the
need for highly skilled installation technicians.
• Optimized for high-density
sites The DataSMART 558 includes an add/drop port for T1/PRI PBX and data traffic integration, and
an Ethernet port for management. DataSMART Plug-ins and remote DataSMARTs can be
• Standards-based management
managed over an Ethernet connection to the DataSMART 558 unit. SNMP and Telnet access
with embedded SNMP are available to all local and remote DataSMART DSU/CSUs.
• Manage multiple shelves with
a single Ethernet port
12-slot Shelf
• Supports leased-line, Frame
Relay and Internet services
B D
2-slot Shelf
• Free DataSMART Installer
C
and Alarms Utility
DSU/CSUs
A
• 5-year warranty A C B D A C B D
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE ORDERING INFORMATION
A To Network, 12-slot Shelf EIA-530 Power Supplies 120 VAC to:
DA15S to DA15P 930xx091 DB25P to DC37S (EIA-530 to RS449) 950xx042 48VDC, 100 W (1 Shelf) 72073
DA15S to Stub 930xx111 DB25P to DB25P 950xx061 48VDC, 100 W x2 (2 Shelves)
DA15S to RJ48C Plug 930xx151 DB25P to DB25P, DCE to DCE, 10 Feet 95010058 or 100 W redundant (1 Shelf) 72075
DA15S to RJ48C Jack Adapter 77891 DB25P to DC37P (EIA-530 to RS449) 48VDC, 100 W x4 (4 Shelves)
To Network, 2-slot Shelf 10 Feet 95010066 or 100 W redundant (2 Shelves) 72079
RJ48C Plug to RJ48C Plug 930xx143 To 10Base-T LAN (DataSMART 558)
RJ48C Plug to RJ48C Plug, crossover 930xx144 RJ45 Plug to RJ45 Plug, Cat. 5E UTP, 6 Feet 93006212 SPECIFICATIONS
B To Terminal Equipment, 12-slot Shelf
NOTE: xx denotes length of cable, contact factory for
(Requires split cables to data and terminal equipment) available lengths. P = Plug (male); S = Socket (female). Power
DB25P to DB25S (EIA-530) and DA15S, 1 Ft. 95001089 DC 24-48VDC, 7.5W
DB25P to MRAC34S and DA15S, 1 Foot 95001091 Network Interface
DB25P to RJ48C Plug (to terminal equip. only) 950xx094 ORDERING INFORMATION Line Rate T1/PRI (1.544 Mbps)
DB25P to RJ48C Jack Adapter 77890 Framing SF, ESF, Ericsson
Description Part No.
To Terminal Equipment, 2-slot Shelf DataSMART 554 T1 Plug-in DSU/CSU 72554 Line Code AMI, B8ZS
RJ48C Plug to RJ48C Plug 930xx143 DataSMART 558 T1 Add/Drop Plug-in DSU/CSU Input Signal DS1 from 0 dB to -27 dB, typical
RJ48C Plug to RJ48C Plug, crossover 930xx144 w/Ethernet 72558 Output Signal DS1 with LBO 0, -7.5, -15 dB
C To Control Terminal (selectable)
Shelves and Mounting Accessories
DE9S to DE9P, 6 Feet 95006022 Mechanical DA15 plug (12-slot Shelf)
Universal Shelf, 12 slots, DC 78270
DE9S to DB25P, 5 Feet 95005023 RJ48C Jack (2-slot Shelf)
Universal Shelf, 2 slots, AC 78075
D To Data Equipment Universal Shelf, 2 slots, DC 78070 Terminal Interface (DataSMART 558)
(12-slot Shelf requires split cables to access both data Blank Plug-in Panel 78271 Line Rate T1/PRI (1.544 Mbps)
and terminal equipment. See Price section for models) Framing SF, ESF, Ericsson
Heat Baffle, Universal Shelf 72273
V.35 Line Code AMI, B8ZS
DB25P to MRAC34P 950xx054 Kentrox Care Support Plans
Input Signal DSX-1 to -10 dB
DB25P to MRAC34P, DCE to DCE 95010073 See page 56 for a full list of available support plans.
Output Signal DSX-1 with equalization
DB25P to MRAC34S, 1 Foot 95001074 Mechanical Special DB25 cable (12-slot Shelf)
DB25P to MRAC34S Adapter 78904 RJ48C Jack (2-slot Shelf)
V.35 Adapter to existing DataSMART 78xxx Physical
Series DSUs, Single-port cable 78905 12-slot Shelf 17" W x 7" H x 12" D
2-slot Shelf 17" W x 1.75" H x 12" D
www.kentrox.com 23
DSUs, Managed, E1/FE1
DataSMART DataSMART
Router
456 E1/FE1
458 Router
NMS
X.21/
In-band V.35
Ethernet Management
Management FE1
• X.21/V.35 data port DataSMART managed E1/FE1 DSU/CSUs from Kentrox deliver the features PTTs and enterprise
customers need for data and voice services such as Internet access, video teleconferencing, LAN-
• In-band management with to-LAN communications, CAD/CAM and SNA applications.
SNMP
DataSMART DSU/CSUs maximize your network uptime with comprehensive management
• Simple on-site setup with features, such as in-band access for simplified remote management. Each DSU/CSU includes
front-panel LCD and LEDs an integrated Ethernet port and a front-panel LCD for easy local management, along with
support for standards-based SNMP management.
• Ethernet management port
• Free DataSMART Installer
DSU/CSUs
A B C D A A B C D
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A To Network and Terminal Equipment D To 10Base-T LAN Environment
DA15P to DA15S 930xx091 RJ45 Plug to RJ45 Plug, Cat. 5E UTP, Operating 0° to 50° C
DA15P to Stub 930xx101 6 Feet (1.8m) 93006212 5% to 90% RH, non-condensing
DA15P to RJ48C Plug 930xx121 Storage -20° to 66° C
NOTE: xx denotes length of cable, contact factory for
DA15P to DA15P 930xx131 5% to 65% RH
available lengths. P = Plug (male); S = Socket (female)
DA15P to RJ48C Jack Adapter 77892 Power
DA15P to 2 x 75 ohm Socket Adapter 77895 AC 100-240VAC, 50-60 Hz, 8W
BNC Plug to BNC Socket 960xx009 ORDERING INFORMATION Physical
BNC Plug to BNC Plug 960xx010
Usage Desktop or tray mount
B To Control Terminal Description Part No. Dimensions 19.68 cm W x 4.19 cm H x 29.21 D
DE9S to DE9P, 6 Feet (2.4 m) 95006022 DataSMART 456 E1/FE1 DSU/CSU 72456 Weight 1.14 kg (approx.)
DE9S to DB25P, 5 Feet (2 m) 95005023 DataSMART 458 E1/FE1 Add/Drop DSU/CSU 72458
C To Data Equipment Shelves and Mounting Accessories
V.35 Mounting Tray, 1 Unit 78031
DB25P to MRAC34P, 10 Feet (4 m) 95010054 Center Support for two 78031 Mounting
DB25P to MRAC34P, DCE to DCE, 10 Feet 95010073 Trays, 19 inch Rack 78031200
DB25P to MRAC34S, 1 Foot (0.4 m) 95001074 Center Support for two 78031 Mounting
DB25P to MRAC34S Adapter 78904 Trays, 23 inch Rack 78031300
X.21 Vertical Mounting Shelf for 9 Stand-alone Units 78032
DB25P to DA15S, X.21 Adapter 78902 North American Power Cord 90000
EIA-530 European EC Power Cord 90001
DB25P to DC37S (EIA-530 to RS449) 950xx042 United Kingdom Power Cord 90002
DB25P to DB25P, 10 Feet (4 m) 95010061 Italian Power Cord 90003
DB25P to DB25P, DCE to DCE, 10 Feet 95010058 Kentrox Care Support Plans
DB25P to DC37P (EIA-530 to RS449), 10 Ft. 95010066 See page 56 for a full list of available support plans.
24 800-733-5511
DSUs, Managed, Multi-port, T1
DCS PSTN
T1 V.35
Point to
Point
V.35
SNA
Controller
• Multiplexing of voice, video Video
• Optional Ethernet connection The DataSMART T1 MAX Dual-Port Add/Drop has a DSX-1 interface that offers add/drop
connectivity for a T1/PRI PBX or a multiplexer, allowing voice, video and data to be integrated
for management onto a single network line.
• Embedded SNMP agent The DataSMART T1 MAX Quad-port Add/Drop DSU has enough ports to handle the more
• Free DataSMART Installer complicated voice, video and data integration applications. As a multiplexer for Frame Relay
service, it allows up to four departmental routers to connect to the network, and guarantees
and Alarms Utility
DSU/CSUs
each department bandwidth and billing autonomy. The Quad-port Add/Drop can also
• 5-year warranty integrate voice, video, router, fax and HDLC traffic such as SNA and X.25.
A B C D E F A B C D E F
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A T1 Network Interface F To Data Equipment Power
DA15S to DA15P 930xx091 V.35 AC 100-240VAC, 50 or 60 Hz, 18W
DA15S to RJ48C Plug 930xx151 DB25P to MRAC34P 950xx054 DC 24-48VDC, 14W, dual power inputs
DA15S to Stub 930xx111 DB25P to MRAC34P (DCE to DCE), 10 Feet 95010073 Network Interface
DA15S to RJ48C Jack Adapter 77891 DB25P to MRAC34S, 1 Foot 95001074 Line Rate T1/PRI (1.544 Mbps)
B Auxiliary Port EIA-530 Framing SF, ESF, Ericsson
C To T1 Terminal Equipment (Add/Drop models) DB25P to DB25P 950xx061 Line Code AMI, B8ZS
DA15P to Stub 930xx101 DB25P to DB25P (DCE to DCE), 10 Feet 95010058 Input Signal DS1 from 0 dB to -27 dB, typical
DA15P to DA15S 930xx091 DB25P to DC37P (EIA-530 to RS449),10 Feet 95010066 Output Signal DS1 with LBO 0, -7.5,
DA15P to RJ48C Plug 930xx121 -15 dB (selectable)
DA15P to DA15P 930xx131 Mechanical DA15 plug
ORDERING INFORMATION
DA15P to DA15P, DCE to DCE, 10 Feet 93010132 Terminal Interface (Add/Drop Port)
DA15P to RJ48C Jack Adapter 77892 Description Part No. Line Rate T1/PRI (1.544 Mbps)
D Control Port (DCE/DTE) DataSMART T1 MAX Dual-port, AC 72561 Framing SF, ESF, Ericsson
DE9S to DE9P, 6 Feet 95006022 DataSMART T1 MAX Dual-port, Add/Drop, AC 72761 Line Code AMI, B8ZS
DE9S to DB25P, 5 Feet 95005023 DataSMART T1 MAX Dual-port, Add/Drop, DC 72765 Input Signal DSX-1 to -10 dB
E To PCMCIA
DataSMART T1 MAX Quad-port, Add/Drop, AC 72771 Output Signal DSX-1 with equalization
DataSMART T1 MAX Quad-port, Add/Drop, DC 72775 Mechanical DA15 socket
Optional PCMCIA Card, 10Base-T
(for SNMP Management) 98101 Kentrox Care Support Plans Physical
See page 56 for a full list of available support plans. Usage Desktop or Rack mount
NOTE: xx denotes length of cable, contact factory for Dimensions 17.0" W x 1.72" H x 11.5" D
available lengths. P = Plug (male); S = Socket (female).
Environment
Operating 0° to 50° C
5% to 90% RH, non-condensing
Storage –20° to 66° C; 5% to 95% RH
www.kentrox.com 25
DSUs, Managed, Multi-port, T1
Carrier Network
Router
CrossPATH II AC FR
T1 T1
DCS PSTN
T1
• One V.35 data port plus Point to
Point
three T1 ports V.35
CrossPATH II, AC
A B C D E
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A To Network (NI1/NI2) E Power Source Network Interface (NI1 and NI2)
DA15S to DA15P 930xx091 US Power Cord 90000 Line Rate T1/PRI (1.544 Mbps)
DA15S to RJ48C Plug 930xx151 EC Power Cord 90001 Framing SF, ESF
DA15S to RJ48C Socket Adapter 77891 UK Power Cord 90002 Line Code AMI, B8ZS
B To Terminal Equipment Italy Power Cord 90003 System Timing NI1 or Internal
DA15P to DA15S 930xx091 Terminal Interface
DA15P to RJ48C Plug 930xx121 Line Rate T1/PRI (1.544 Mbps)
ORDERING INFORMATION
DA15P to DA15P 930xx131 Framing SF, ESF
DA15P to RJ48C Socket Adapter 77892 Description Part No. Line Code AMI, B8ZS
Crossover cables available CrossPATH II Triple T1 ICSU, AC 77731 Input Signal DSX-1 to -10 dB
C To Data Equipment (V.35) Kentrox Care Support Plans Output Signal DSX-1 with equalization
DB25P to MRAC34S, 1 Foot 95001074 See page 56 for a full list of available support plans. Mechanical DA15 socket
DB25P to MRAC34P 950xx054 Power
DB25P to MRAC34S Adapter 78904 AC 100-240VAC, 50-60 Hz, 18W
D To Control Terminal Physical
DE9S to DE9P, 6 Feet 95006022 Usage Rack mount (19” or 23”)
Dimensions 17” W x 1.75” H x 12” D
NOTE: xx denotes length of cable, contact factory for available
lengths. P=Plug (male); S=Socket (female).
1 rack unit height
Environment
Operating -20° to 60° C
26 800-733-5511
DSUs, Managed, Multi-port, E1
DSU/CSUs
• 5-year warranty
DataSMART E1 MAX , Dual-port
A B C D E
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A E1 Network Interface EIA-530 Power
DA15P to DA15S 930xx091 DB25P to DB25P 950xx061 AC 100-240VAC, 50-60 Hz, 18W
DA15P to Stub 930xx101 DB25P to DB25P (DCE to DCE), 10 Feet 95010058 Network Interface
DA15P to RJ48C Plug 930xx121 DB25P to DC37P (EIA-530 to RS449), Line Rate E1 (2.048 Mbps)
DA15P to DA15P 930xx131 10 Feet 95010066 Framing ITU-T G.704
DA15P to RJ48C Jack Adapter 77892 DB25P to DC37S (EIA-530 to RS449) 950xx042 Line Code HDB3
DA15P to 2x 75 ohm BNC Jack Adapter 77895 X.21 Mechanical DA15 Socket for 120 ohm,
BNC Plug to BNC Plug 960xx010 DB25P to DA15S, X.21 Adapter 78902 Adapter for 75 ohm BNC
B Auxiliary Port Physical
NOTE: xx denotes length of cable, contact factory for
C Control Port (DCE/DTE) available lengths. P = Plug (male); S = Socket (female). Usage Desktop or Rack mount
DE9S to DE9P, 6 Feet (1.8 m) 95006022 Dimensions 4.37 cm H x 43.2 cm W x 29.2 cm L
DE9S to DB25P, 5 Feet (2 m) 95005023 Environment
ORDERING INFORMATION
D To PCMCIA Operating 0° to 50° C
Optional PCMCIA Card, 10Base-T Description Part No. 5% to 90% RH, non-condensing
(For SNMP management) 98101 DataSMART E1 MAX Dual-port DSU, AC 72521 Storage –20° to 66° C
E To Data Equipment North American Power Cord 90000 5% to 95% RH
V.35 European EC Power Cord 90001
DB25P to MRAC34P 950xx054 United Kingdom Power Cord 90002
DB25P to MRAC34P (DCE to DCE), Italian Power Cord 90003
10 Feet (4 m) 95010073 Kentrox Care Support Plans
DB25P to MRAC34S, 1 Foot (0.4m) 95001074 See page 56 for a full list of available support plans.
www.kentrox.com 27
DSUs, Managed, 56/64k
Central Site
12-slot Universal Shelf
with DataSMART 552
DSU/CSUs
56/64k
• Low-cost, SNMP-managed Network
access
• Dynamic troubleshooting
via Telnet
• Access to Frame Relay,
leased-line and Internet The DataSMART 552 56/64k DSU/CSU plugs into the 12-slot or 2-slot Kentrox Universal Shelf
for a compact, central site solution. This DSU/CSU is the ideal low-cost entry into managed
services
networking. It includes embedded SNMP, and supports standard and enterprise MIBs.
• Free DataSMART Installer
With the DataSMART 552, you can also remotely configure your units, download software
and Alarms Utility
upgrades and receive traps for important network events. Front-panel LEDs show important
• 5-year warranty status, such as service failure or test mode.
DSU/CSUs
12-slot Shelf
A
2-slot Shelf
C
B
B C A B C A
28 800-733-5511
DSUs, Basic, T1/FT1
Satellite 651
DSU/CSU Network
V.35 T1/FT1 Internet,
Frame Relay,
Leased Line
Router
• Low-cost, remote office The Satellite 651 DSU/CSU is the low-cost solution for T1/FT1 networks. For simple installation,
access the Satellite 651 ships with default settings for ESF framing and B8ZS line coding — the most
common configurations. For changes to these settings, configuration can easily be accom-
• Remote performance plished via the front-panel LCD.
monitoring and diagnostics
With a Kentrox DataSMART DSU/CSU at the central office, you can configure the far-end
• Local control with front- Satellite, collect performance statistics, view system status and generate loopbacks. Management
panel LCD and LEDs and control of the Satellite is achieved via the ESF FDL link on a T1 circuit.
DSU/CSUs
Vertical Shelf
Satellite 651
A B
www.kentrox.com 29
DSUs, Basic, T1/FT1, 56/64k
D-SERV T1 DSU/CSU
D-SERV Router
T1/FT1 V.35
Internet
• Ideal for high-speed Internet The D-SERV single-port T1 DSU/CSU is DCS compatible and supports frame-based services. The
or remote office connectivity D-SERV provides a compact, easy-to-install solution for high-speed Internet or remote office
connectivity. It is compliant with applicable industry standards for T1 digital service, safety and
• Easy installation for fast environmental conditions.
turn-up of T1 services
The D-SERV accepts clocking from either network, internal or DTE timing sources. DTE timing
• Supports Frame Relay and allows the unit to be used in tail circuit applications. It can also be used as a high-speed line
leased-line services driver, converting a data signal to T1 format and extending the signal up to 6,000 feet over
two shielded twisted pairs.
• Stand-alone and shelf
plug-in versions For economical, reliable termination of multiple T1 lines, up to twelve D-SERV Plug-in units can
be installed in the D-SERV shelf.
• 5-year warranty
DSU/CSUs
V.35
D-SERV II 56/64k Network
Internet,
Frame Relay,
DDS
Router
• Provides low-cost DDS The D-SERV II 56/64 kbps DSU/CSU from Kentrox supports high-speed LAN-to-LAN internet-
working, video-conferencing services, Frame Relay, and Internet access. The D-SERV II provides
service termination
a high quality, economical solution for the network termination of 56/64 kbps clear channel
• Easy to use and configure digital services.
• Switch-selectable data rates Easy to use and configure, the D-SERV II installs in minutes, providing plug-and-play operation
• Internal power supply for most common services. It features a built-in test pattern generator and error indicator,
along with a full complement of front-panel LED indicators, affording “at-a-glance” system
monitoring.
30 800-733-5511
Channel Service Units (CSUs)
• M-PATH
• T-SMART
• T-SERV II
• Satellite 931
31
CSUs, Managed, T1
Via the in-band management path, T1 performance information gathered by the M-PATH can be
used to proactively manage the network. M-PATH performance reports identify potential T1 line
failures in advance. An embedded SNMP agent allows the wireless provider to select from a wide
range of standard management platforms. Additonally, software upgrades can be accomplished
• In-band management eliminates in-band.
most onsite maintenance costs
The M-PATH can be configured from a laptop or desktop Windows® PC via the DataSMART®
• Free DataSMART Installer utility Installer utility included with the product. The M-PATH CSU plug-in cards can be installed in
speeds configuration various shelf-mounting systems, for use in large and small-sized base station sites. The available
data port in the M-PATH CSU integrates messaging equipment traffic and voice traffic onto a
• Extended temperature range
single T1 line. The data port can also transport management traffic for other base station
• Compact design minimizes equipment to the network operations center.
space requirements
The M-PATH is available in a stand-alone or a plug-in version for the 2-slot and 12-slot
• 5-year warranty Universal Shelf.
A B A B C D A B C D
BACK PANEL AND CABLE GUIDE BACK PANEL AND CABLE GUIDE SPECIFICATIONS
A To Network (2-slot Shelf) EIA-530 Network Interface
RJ48C Plug to RJ48C Plug 930xx143 DB25P to DC37S (EIA-530 to RS449) 950xx042 Line Rate T1/PRI (1.544 Mbps)
To Network (Stand-alone) DB25P to DB25P 950xx061 Framing SF, ESF, Ericsson
DA15S to DA15P 930xx091 DB25P to DB25P, DCE to DCE, 10 Ft. 95010058 Line Code AMI, B8ZS
DA15S to Stub 930xx111 DB25P to DC37P (EIA-530 to RS449) 10 Ft. 95010066 Mechanical RJ48 Jack (2-slot Shelf);
DA15S to RJ48C Plug 930xx151 DA15 Plug (Stand-alone)
(Stand-alone requires split cables to access both data and
DA15S to RJ48C Jack Adapter 77891 terminal equipment. See Terminal Equipment cable section
System Timing Internal, loop, terminal
B To Control Terminal for model numbers. For cables to connect data equipment Terminal Interface
CSUs
DE9S to DE9P, 6 Feet 95006022 only, contact factory.) Line Rate T1/PRI (1.544 Mbps)
DE9S to DB25P, 5 Feet 95005023 * Ships with 77532. Framing SF, ESF, Ericsson
C To Terminal Equipment (2-slot Shelf)
Line Code AMI, B8ZS
NOTE: xx denotes length of cable, contact factory for available
RJ48C to RJ48C Modular Plug, DCE to DCE 930xx144 lengths. P = Plug (male); S = Socket (female). Input Signal DSX-1 to -10 dB
Output Signal DSX-1 with equalization
To Terminal Equipment (Stand-alone)
Mechanical DB25 socket (S/A)
(Requires split cables to data and terminal equipment)
ORDERING INFORMATION RJ48C socket (2-slot Shelf)
DB25P to DB25S (EIA-530) and DA15S, 1 Ft. 95001089
DB25P to MRAC34S and DA15S, 1 Foot 95001091 Power
Description Part No.
DB25P to RJ48C Plug DC 24-48VDC, 8 watts
M-PATH 532 T1 Stand-alone CSU, DC 77532
950xx094 Dual-power input (2-slot Shelf)
(to terminal equipment only) M-PATH 537 T1 Plug-in CSU, DC 77537
AC 120VAC, 10 watts (2-slot Shelf only)
D To Data Equipment (S/A and 2-slot) M-PATH 538 T1 Plug-in CSU with Ethernet, DC 77538
V.35 Universal Shelf, 2-slot, DC 78070 Physical
DB25P to MRAC34P 950xx054 Universal Shelf, 2-slot, AC 78075 2-slot Shelf 17” W x 1.75” H x 12” D
DB25P to MRAC34S, 1 Foot 95001074 1 rack unit height
Power Supplies, ordered separately, 120 VAC to:
DB25P to MRAC34S Adapter 78904* (for DC-powered shelves only)
Stand-alone 8” W x 1.93” H x 11.25” D
24 VDC wall mt., 12 W, 1 Unit Environment
(for 77532 stand-alone) 77094 Operating -20° to 60° C (2-slot Shelf)
48 VDC, 30 W, up to 3 Units 77092 -20° to 60° C (Stand-alone)
Kentrox Care Support Plans 5% to 90% RH, non-condensing
See page 56 for a full list of available support plans.
32 800-733-5511
CSUs, Managed, T1
Radios
M-PATH
12-slot Shelf
T1s
To
MSC
V.35
CSUs
DA15S to DA15P 930xx091 M-PATH 537 T1 Plug-in CSU, DC 77537 DC 24-48VDC, 8 watts per M-PATH
DA15S to Stub 930xx111 M-PATH 538 T1 Plug-in CSU with Ethernet, DC 77538 plug-in; Dual-power input
DA15S to RJ48C Plug 930xx151 Universal Shelf, 12-slot, DC 78270 Network Interface
DA15S to RJ48C Jack Adapter 77891 Blank Plug-in Panel 78271 Line Rate T1/PRI (1.544 Mbps)
B To Terminal Equipment Power Supplies, ordered separately, 120 VAC to: Framing SF, ESF, Ericsson
DB25P to DB25S (EIA-530) and DA15S, 48 VDC, 30 W, up to 3 Units 77092 Line Code AMI, B8ZS
1 Foot 95001089 48 VDC, 100 W (1 Shelf) 72073 Mechanical DA15 plug (12-slot shelf)
DB25P to MRAC34S and DA15S, 1 Foot 95001091 48 VDC, 100 W x2 (2 Shelves) System Timing Internal, loop, terminal
DB25P to RJ48C Plug or 100 W redundant (1 Shelf) 72075 Terminal Interface
(to terminal equipment only) 950xx094 48 VDC, 100 W x4 (4 Shelves) Line Rate T1/PRI (1.544 Mbps)
DB25P to RJ48C Adapter 77890 or 100 W redundant (2 Shelves) 72079 Framing SF, ESF, Ericsson
C To Control Terminal Kentrox Care Support Plans Line Code AMI, B8ZS
DE9S to DE9P, 6 Feet 95006022 See page 56 for a full list of available support plans. Input Signal DSX-1 to -10 dB
DE9S to DB25P, 5 Feet 95005023 Output Signal DSX-1 with equalization
D To Data Equipment Mechanical DB25 socket
DB25P to MRAC34P 950xx054 Shelf Physical
DB25P to MRAC34S Adapter 78904 Usage Rack mount (19” or 23”)
12-slot Shelf 17” W x 7” H x 12” D
NOTE: xx denotes length of cable, contact factory for available
lengths. P = Plug (male); S = Socket (female).
4 rack unit height
Environment
Operating -20° to 60° C (12-slot Shelf)
5% to 90% RH, non-condensing
www.kentrox.com 33
CSUs, Monitoring, T1
T-SMART
T1/PRI PBX
Base Station Public
MUX T1 T1 Network
Router
Channel Bank
• Intelligent local management The market-proven T-SMART ICSU provides in-service monitoring of both ESF and SF (D4)
networks for early detection, isolation and diagnosis of problems. The T-SMART can auto-
of T1 circuits
matically dial up, via modem, your network management center to report alarm conditions.
• In-service performance Problems can be further isolated and diagnosed with user-selectable loopback tests and a
monitoring built-in test signal generator.
• Alarm reporting and diagnostics Network and terminal sites can be independently configured for ESF or SF standards. The
T-SMART CSU automatically converts signals as necessary. The T-SMART CSU is fully
• Stand-alone or shelf plug-ins
compatible with industry standards for T1 ISDN PRI service, safety and environmental conditions.
• Extended temperature range
The Group Controller Unit (GCU) and Shelf
• 5-year warranty Interface Unit (SIU) provide control access
to large numbers of T-SMART CSUs in
shelf installations.
T-SMART
DA15P to RJ48C Jack Adapter 77892 One unit 19" Mounting Bracket Kit 77096 Mechanical DA15 Plug 15-pin (S/A, 4-slot Shelf)
B To Control Terminal 19" Mounting Tray for up to 2 Units 77819 RJ48H Plug 50-pin telco connector
DB25P to DB25P 950xx061 23" mounting Tray for up to 2 Units 77823 (12-slot Shelf)
C To Network Power Supplies, ordered separately, 120 VAC to: Signal Monitor Low Pulse Density and Keep Alive
25-Pair RJ48H Socket/Plug 930xx061* 24 VDC Wall Mount, 6 W, 1 Unit 77995 Configuration Maintained in non-volatile memory
25-Pair RJ48H Socket/Stub 930xx081* 24 VDC Wall Mount, 12 W, up to 3 Units 77094 Terminal Interface
DA15P to DA15S 930xx091 48 VDC, 30 W, up to 8 Units 77092 Line Rate T1/PRI (1.544 Mbps)
DA15S to Stub 930xx111 48 VDC, 100 W, (2 Shelves) 72073 Framing SF, ESF (selectable)
DA15S to RJ48CP 930xx151 48 VDC, 100 W x2 (4 Shelves) Line Code AMI, B8ZS (selectable)
RJ48H Socket to 12x RJ48C Jack 77830* or 100 W redundant (2 Shelves) 72075 Input Signal DSX-1 to -6 dB
RJ48H Socket to 12x DA15P 77850* 48 VDC, 100 W x4 (8 Shelves) Output Signal DSX-1 to 655 feet equalized
DA15S to RJ48C Jack Adapter 77891 or 100 W redundant (4 Shelves) 72079 Mechanical DA15 Socket 15-pin (S/A, 4-slot Shelf)
RJ48H Socket 50-pin telco connector
*12-slot Shelf only Units are shipped DC-ready. For AC operation, a power
supply must be ordered.
(12-slot Shelf)
NOTE: xx denotes length of cable, contact factory for avail- Configuration Maintained in non-volatile memory
able lengths. P = Plug (male); S = Socket (female). Kentrox Care Support Plans
See page 56 for a full list of available support plans. Environment
Operating -20° to 60° C
Physical
Stand-alone 6.75" W x 1.625" H x 10.5" D
4-slot Shelf 19" W x 3.5" H x 10.5" D
12-slot Shelf 19" W x 6.75" H x 10.5" D
34 800-733-5511
CSUs, Basic, T1
T-SERV II T1 CSU
T-SERV II
TI/PRI PBX
Base Station Public
MUX
T1 T1
Network
Router
Channel Bank
T-SERV II
CSUs
DA15P to RJ48C Jack Adapter 77892 23" Mounting Tray for up to 2 Units 77823 Output Signal DS1 with LBO 0, -7.5, -15, or
B Not Used Power Supplies, ordered separately, 120 VAC to: -22.5 dB (selectable)
C To Network 24 VDC Wall Mount, 6 W, up to 4 Units Mechanical DA15 Plug 15-pin (S/A, 4-slot Shelf)
25-Pair RJ48H Plug/Socket 930xx061* (Stand-alone only) 77995 RJ48H Plug 50-pin telco connector
25-Pair RJ48H Socket/Stub 930xx081* 24 VDC Wall mount, 12 W, up to 8 Units (12-slot Shelf)
DA15P to DA15S 930xx091 (Stand-alone or 4-slot Shelf only) 77094 Terminal Interface
DA15S to Stub 930xx111 48 VDC, 30 W, up to 20 Units 77092 Line Rate T1/PRI (1.544 Mbps)
DA15S to RJ48CP 930xx151 48 VDC, 100 W (5 Shelves) 72073 Framing Transparent-passes
RJ48HS to 12x RJ48C Adapter Plug 77830* 48 VDC, 100 W x2 (10 Shelves) or unframed, D4, SF, ESF
RJ48HS to 12x DA15P Adapter 77850* 100 W redundant (5 Shelves) 72075 Line Code Transparent-passes AMI, B8ZS, ZBTSI
DA15S to RJ48C Jack Adapter 77891001 48 VDC, 100 W x4 (20 Shelves) or Input Signal DSX-1 to -27 dB
100 W redundant (10 Shelves) 72079 Output Signal DSX-1
*12-slot Shelf only
Mechanical DA15 Socket 15-pin (S/A, 4-slot Shelf)
NOTE: xx denotes length of cable, contact factory for Units are shipped DC-ready. For AC operation, a power
supply must be ordered.
RJ48H Socket 50-pin telco connector
available lengths. P = Plug (male); S = Socket (female).
(12-slot Shelf)
Kentrox Care Support Plans
See page 56 for a full list of available support plans. Environment
Operating -20° to 60° C
Physical
Stand-alone 6.75" W x 1.625" H x 10.5" D
4-slot Shelf 19" W x 3.5" H x 10.5" D
12-slot Shelf 19" W x 6.75" H x 10.5" D
www.kentrox.com 35
CSUs, Basic, T1
• Economical choice for T1 or The Satellite 931 CSU provides conditioning of T1 and ISDN PRI service lines. Its transparent
ISDN PRI line termination operation passes the T1 bitstream unaltered. The Satellite 931 includes bipolar violation (BPV)
correction, line build out, front-panel LED status indicators, test jacks, power options, and
• Switch settings for easy automatic keep-alive signal generation. It also features a signal monitor to ensure proper pulse
configuration and diagnostics density is transmitted to the network.
• Front-panel status LEDs The Satellite 931 includes regenerators for both the incoming signals from the network and
from local customer equipment toward the network. The BPV detector monitors the Receive
• T1 loopbacks for circuit
line from the network only.
diagnosis
• Test jacks for monitoring
• 5-year warranty
Satellite 931
A B
RJ48C Plug to RJ48C Plug, DCE to DCE 930xx144 Satellite 931 T1 CSU with AC Power Supply 77931P Framing Transparent
B To Terminal Satellite 931 Spare AC Power Supply 77995 Line Code Transparent
RJ48C Plug to RJ48C Plug, 10 Feet 93010143 Kentrox Care Support Plans Mechanical RJ48C Jack
See page 56 for a full list of available support plans. Terminal Interface
*Ships with unit
Line Rate T1/PRI (1.544 Mbps)
NOTE: xx denotes length of cable, contact factory for Framing Transparent
available lengths. P = Plug (male); S = Socket (female).
Input Signal DSX-1 to -27 dB
Output Signal DSX-1 at connector
Mechanical RJ48C socket
Power
DC 24-48VDC
Physical
Dimensions 1.875” H x 5.44” W x 7.5” L
Weight Approximately 1 lb.
Environment
Storage -20° to 70° C (5% to 65% RH)
Operating 0° C to 50° C
Relative Humidity 5% to 90% RH, non-condensing
36 800-733-5511
Wireless Access
• CrossPATH 3G
• CrossPATH IIe
• M-PATH
• T-SMART
• T-SERV II
37
WIRELESS ACCESS
38 800-733-5511
WIRELESS ACCESS, T1
A C D E A B C D E
www.kentrox.com 39
WIRELESS ACCESS, T1
Radios
FT1s
To
MSC
T1
To
MSC
FT1
To FT1
MSC
E-911
3 CrossPATH IIe V.35
units
• Save precious bandwidth by As today’s wireless market grows, multiple radios are often located at a single site. This
managing up to five co-located growth is due to increased usage in certain areas or the deployment of overlay networks
that mix different technologies.
units over a single DS0
• Combine cell site traffic, IP For cell site locations like this, we have developed the CrossPATH IIe Triple T1 ICSU with
Ethernet. The CrossPATH IIe allows wireless service providers to integrate multiple radio inter-
traffic and data traffic onto a faces into fewer backhaul T1s than would normally be required, while utilizing only a single
single T1 DS0 to manage and monitor all units at a single location. It also provides the ability to connect
• Remote SNMP management one of the available Ethernet ports to a laptop or other IP-enabled device for backhaul to a
central server for remote communications.
and reporting on all interfaces
• 5-year warranty CrossPATH IIe integrates three T1 CrossPATH IIe
ports, a quad Ethernet hub, and a
V.35 interface, making it ideal for
use in growing wireless cell sites.
A B C D E
40 800-733-5511
WIRELESS ACCESS, T1
Base Station
FT1
M-PATH
FT1
Radio
V.35 NOC
E-911 Locator MSC
Base Station
Mgt. DS0s
FT1
M-PATH Router
Radio FT1
V.35 SNMP, Alarms,
Telnet
E-911 Locator
• In-band management eliminates The M-PATH T1 ICSU saves money by minimizing onsite technician visits to remote base
most onsite maintenance costs stations in wireless networks. The M-PATH can be configured from a laptop or desktop PC via
the DataSMART Installer utility included with the product. Via the in-band management path,
• Free DataSMART Installer utility T1 performance information gathered by the M-PATH can be used to proactively manage the
speeds configuration network. M-PATH performance reports identify potential T1 line failures in advance. An embedded
SNMP agent allows the wireless provider to select from a wide range of standard management
• Extended temperature range platforms. Additionally, software upgrades can be accomplished in-band. The available data port
• Compact design minimizes in the M-PATH CSU integrates E-911 or messaging equipment traffic with voice traffic onto
a single T1 line.
space requirements
• 5-year warranty The M-PATH is available in a stand-alone or a plug-in version for the 2-slot and 12-slot
Universal Shelf.
M-PATH M-PATH
2-slot Shelf T1 T1 12-slot Shelf
To MSC T1 T1s
To MSC To
T1 V.35 MSC
V.35
www.kentrox.com 41
WIRELESS ACCESS, T1
Radio
MSC
T1
3/1/0
DCS Network
To MSC Management
T-SMART Systems
• Intelligent local management The market-proven T-SMART ICSU provides in-service monitoring of both ESF and SF (D4)
of T1 circuits networks for early detection, isolation and diagnosis of problems. The T-SMART can auto-
matically dial up, via modem, your network management center to report alarm conditions.
• In-service performance Problems can be further isolated and diagnosed with user-selectable loopback tests and a
monitoring built-in test signal generator.
• Alarm reporting and diagnostics Network and terminal sites can be independently configured for ESF or SF standards. The
T-SMART CSU automatically converts signals as necessary. The T-SMART CSU is fully
• Extended temperature range
compatible with industry standards for T1 service, safety and environmental conditions.
• 5-year warranty
The Group Controller Unit (GCU) and Shelf Interface Unit (SIU) provide control access to
large numbers of T-SMART CSUs in shelf installations.
Radio
MSC
T1
3/1/0
To MSC DCS
T-SERV II
• Economical choice for T1 line The market-leading T-SERV II CSU offers performance monitoring and conditioning of T1
termination service lines. It meets all FCC and carrier requirements for a standard interface between
the user and the network.
• Easy to install and use
All basic CSU functions are contained in the T-SERV II, including bipolar violation (BPV)
• Stand-alone or shelf plug-in correction, line build-out (LBO), loop-code generator for fault isolation, front-panel LED
versions status indicators, test jacks, power options and automatic keep-alive signal generation.
Its transparent operation passes the T1 bitstream unaltered.
• Extended temperature range
• 5-year warranty
WIRELESS
42 800-733-5511
ATM Access Concentrators
• AAC-2
• AAC-3
43
ACCESS CONCENTRATORS
unprecedented increase in the AAC ATM access concentrators are the perfect systems for realizing these cost
volume of WAN traffic. This explo- savings. They aggregate services by statistically multiplexing voice, video, and
sive growth has spawned an endless data on a single network connection.
stream of choices for transporting
the increased network load. Today Just as important, the AAC provides sophisticated bench marking tools that
it is common to find WANs using allow network managers to identify areas of over-utilization and under-utilization.
T1/E1 for voice, Frame Relay for With these tools, applications can be fine-tuned to use only the bandwidth
data, ISDN for videoconferencing, required. Furthermore, AACs offer extensive reporting and troubleshooting
dial-up connections for remote options to ensure the network is operating at peak performance.
computing, and even wireless tech-
By consolidating services using the AAC, enterprises with mid-sized WANs
nologies for cross-town communi-
can reduce network service expenditures by up to 30% and deliver a return
cations. Known as hybrid networks,
of investment in less than six months.
these complex arrays of services and
applications are difficult to manage
Network Hubbing Location
and expensive to support.
Router
An analysis of most hybrid networks ATM
AAC-3 V.35
AAC-2 Video
The advanced traffic management features of the AAC ensure that you get the
service level you need for each application. Constant bit rate video and voice are
given priority, while bursty data is buffered and smoothed at the network edge.
44 800-733-5511
ACCESS CONCENTRATORS
ATM
AAC-3 AAC Manager
The AAC-3 offers the highest levels of AAC Manager is a GUI application that
connectivity and scalability, supporting speeds simplifies configuration and management
ranging from T1/E1 to OC-3/STM-1. Its modular by providing an intuitive and easy-to-use
8-slot chassis makes it an ideal hubbing device interface. With AAC Manager for AAC and
for enterprise networks or a port fan-out CellSMART 200 Inverse Multiplexers, you can
device for service distribution. quickly perform all module and port configu-
ration, simplifying and accelerating product
deployment. You can even save an AAC con-
AAC-2 figuration to your local computer, providing a
The AAC-2 provides economical integration redundant copy of all configuration param-
of services over public and private networks eters and allowing you to easily replicate simi-
at speeds ranging from T1/E1 to OC-3/STM-1. lar configurations. AAC Manager can be used AAC Manager provides a graphical representation
Its smaller 4-slot chassis makes it suitable with AAC-3 and AAC-2 access concentrators, of the system, displaying the current status of each
for mid-sized locations that need to connect as well as the CellSMART 200. It’s a flexible, module in the chassis. You can simply click on an
voice, video, and data traffic with the WAN. powerful, platform-independent solution. LED to view performance data and alarm informa-
tion for an interface.
Phy Prot Cell PM Quad Enhanced Octal CES Packet Quad Quad
sica oco
l Laye l Mo Cell PM Shaping PM PM Packet Packet/
dule Cell PM PM CBR PM
r Mo s
dule
s (10200) (10202) (10204) (10207) (10201) (10205) (10203)
DS3 PLM (10300) � � � �
___________________________________________________________________________________________
HSSI PLM (10301) � �
___________________________________________________________________________________________
Quad DSX-1 PLM (10302) � � �
___________________________________________________________________________________________
OC-3c/STM-1 MM PLM (10304) � �
___________________________________________________________________________________________
OC-3c/STM-1 SM PLM (10305) � �
___________________________________________________________________________________________
E3 PLM (10306) � � � �
___________________________________________________________________________________________
Quad E1 PLM (10307) � � �
___________________________________________________________________________________________
Quad V.35/530 PLM (10309) � � � �
___________________________________________________________________________________________
Octal DSX-1 PLM (10314) �
___________________________________________________________________________________________
Octal E1 PLM (10315) �
___________________________________________________________________________________________
Octal DS1 PLM (10317) �
___________________________________________________________________________________________
Octal DS1 IMA PLM (10318) � �
___________________________________________________________________________________________
Octal E1 IMA PLM (10319) � �
___________________________________________________________________________________________
www.kentrox.com 45
ACCESS CONCENTRATORS
AAC-3
ATM
AAC-2
• Same features as the AAC-3 in The AAC-2 delivers all the benefits of an access concentrator at a price comparable to a TDM
a 4-slot chassis multiplexer. It provides economical integration of data, voice and video traffic on a WAN with
a modular architecture that allows a “mix-and-match” of services and applications. The AAC-2
• NxT1/E1 Inverse Multiplexing can be managed via Telnet, SNMP or with AAC Manager.
over ATM (IMA)
The AAC-2 supports Inverse Multiplexing over ATM (IMA), a technology that serves sites or
• Ideal for mid-sized organizations applications which need bandwidth greater than T1/E1, but not as much as a more expensive
T3/E3 link. IMA divides a single high-speed stream of traffic across multiple T1/E1 links, then
• 2-year hardware warranty
rejoins the traffic at the destination.
The AAC-2 is an ideal edge device for mid-sized organizations and can be upgraded to the
larger scale AAC-3 as the network grows.
46 800-733-5511
ACCESS CONCENTRATORS
ATM
PRODUCT PART NUMBER
Chassis and Power Supplies
AAC-3 Eight-slot Chassis 10000
AAC-3 DC Power Supply 10101
AAC-3 Universal Input Power Supply, 100 to 240VAC 10103
AAC-2 Four-slot Chassis 10001
AAC-2 DC Power Supply 10111
AAC-2 Universal Input Power Supply, 100 to 240VAC 10113
Common Modules
AAC Integrated System Controller 10022
AAC System Controller 10010
AAC Alarm Module 10011
AAC Extension Module 10021
Protocol Modules
AAC Cell Protocol Module 10200
AAC Packet Protocol Module 10201
AAC Quad Cell Protocol Module 10202
AAC Quad Packet / CBR Protocol Module 10203
AAC Enhanced Shaping Cell Protocol Module 10204
AAC Quad Packet Protocol Module 10205
AAC Octal CES/CBR Protocol Module 10207
Physical Layer Modules
AAC DS3 Physical Layer Module 10300
AAC HSSI Physical Layer Module 10301
AAC Quad DSX-1 Physical Layer Module 10302
AAC OC-3c/STM-1 MM Fiber Physical Layer Module 10304
AAC OC-3c/STM-1 SM Fiber Physical Layer Module 10305
AAC E3 Physical Layer Module 10306
AAC Quad E1 Physical Layer Module 10307
AAC Quad V.35/EIA-530/X.21 Physical Layer Module 10309
AAC Octal (8-port) DSX-1 Physical Layer Module 10314
AAC Octal (8-port) E1 Physical Layer Module 10315
AAC Octal (8-port) DS1 (CSU) Physical Layer Module 10317
AAC Octal (8-port) IMA DS1 Physical Layer Module 10318
AAC Octal (8-port) IMA E1 Physical Layer Module 10319
www.kentrox.com 47
ACCESS CONCENTRATORS
See page 56 for a full list of support plans available for the AAC.
48 800-733-5511
Inverse Multiplexers
49
INVERSE MULTIPLEXERS
Point-to-Point
Leased Lines
Router V.35, HSSI Router
NxT1/E1 DS3/E3
• NxT1/E1 access using Inverse CellSMART 200 Inverse Multiplexers deliver high-bandwidth connections for both private
Multiplexing over ATM (IMA) and public networks. Up to eight T1 or E1 lines can be combined to supply a single, logical
connection that operates at 12 to 16 Mbps. Organizations can scale their network growth
MULTIPLEXERS
• High-speed V.35 and HSSI and obtain additional bandwidth at a fraction of the cost of T3/E3 service.
• Scalable network growth The CellSMART 200 utilizes established, industry-standard inverse multiplexing protocols,
• In-band SNMP network ensuring compatibility with the widest possible range of equipment and services. The IMA
protocol can be used across point-to-point or leased-line circuits, or an IMA service. Unlike
management
multi-link PPP or multi-link Frame Relay, the IMA protocol supports multiple QoS categories to
• 2-year hardware warranty support the transport of voice, data, and video. Multiple priority levels allow for prioritization
of traffic if congestion occurs.
The CellSMART 200 supports a wide choice of physical interfaces, including V.35, EIA-530,
RS-449, and X.21, HSSI, DS3, and OC-3, and a variety of protocols including Frame Relay,
HDLC, ATM DXI, ATM UNI.
Fully SNMP-compliant, the CellSMART 200 can be managed by any SNMP manager. Built-in
Ethernet and RS-232 control ports provide management interfaces for local management.
And in-band management allows end-to-end visibility in most networks.
See page 56 for a full list of support plans available for the CellSMART.
50 800-733-5511
Service and Support
• Pre-sales Applications
Support
• Customer Service
• Technical Assistance
Center
• Kentrox Care
Support Plans
• Kentrox Care
Installation
• Technical Training
51
CUSTOMER CARE
Kentrox is dedicated to the highest quality of customer service, delivered with a sense of friendliness
and helpfulness, with the end result always being customer satisfaction. Our goal is to provide you
peace of mind and the best customer care in the industry.
Customer Service
As a Kentrox customer, you will benefit from our excellent customer service throughout your
purchasing cycle. Our friendly support staff is standing by and ready to assist you with easy access
to pricing, order placement and delivery dates. You can contact this group for:
• Evaluation units
• Repairs (in- and out-of-warranty) and returns
• Questions about Kentrox Care Support Plans
• Installation service purchases
• Quotes for standard Kentrox product configurations
• Pricing and order placement (for direct customers)
52 800-733-5511
SUPPORT PLANS
Kentrox offers a wide range of support beyond that offered in our standard, limited warranty. While
the Kentrox standard warranty protects you against product defects, you may need quicker problem
resolution than is provided in the standard warranty.
Kentrox Care Support Plans are designed to maximize your company and employee productivity,
as well as your return-on-investment in Kentrox equipment. These plans meet a variety of business
requirements, whether you need 4-hour or next-business-day (NBD) support, onsite or remote, or
merely access to software upgrades. These plans will enable you to:
• Select support levels that meet your business requirements - you pay only for what you need
• Protect your investment in your Kentrox products
• Make budgeting easy, with fixed costs that can include parts and labor
• Ensure support is there when you need it through professional, technical experts
SUPPORT
Kentrox Care 4 hours 4 hours 7 days x 24 < 30 Yes Yes 30%
Onsite 7x24x4 hours4 minutes
Kentrox Care 4 hours5 4 hours5 6am-5pm < 30 Yes Yes 30%
Onsite 5x8x4 Pacific time minutes
Kentrox Care 1 business 1 business day6 7 days x 24 < 60 Yes Yes 30%
Onsite 7x24xNBD day6 hours4 minutes
Kentrox Care 1 business 1 business day6 6am-5pm < 60 Yes Yes 30%
Onsite 5x8xNBD day6 Pacific time minutes
Kentrox Care Not 1 business day6 7 days x 24 < 60 Yes Yes 30%
Basic 7x24xNBD included hours4 minutes
Kentrox Care Not 1 business day6 Not included n/a Not Yes Not
Exchange NBD included included included
Kentrox Care Not Not included Not included n/a Yes Yes Not
Software included included
1. The Onsite 7x24x4 and the Onsite 5x8x4 plans are not available in all locations. To verify the eligibility of your equipment location, please contact
maintenance@kentrox.com or call 800-733-5511, Option 51.
2. Onsite support and advance replacements are for equipment failures only.
3. AAC and CellSMART replacement products will be provided at a component level.
4. Telephone support available at no charge outside of normal business hours for service-affecting problems only.
5. Call must be received by 1:00 p.m. local time, excluding weekends and holidays.
6. Call must be received by 1:00 p.m. Pacific time, excluding weekends and holidays.
PLEASE NOTE: Normal business hours are defined as 6:00 a.m. to 5:00 p.m. Pacific time, excluding weekends and holidays.
NBD = Next Business Day
www.kentrox.com 53
SUPPORT PLANS
Kentrox Care Onsite 7x24x4 includes: With Kentrox Care Onsite 7x24xNBD you will have:
✔ Onsite technical service within 4 hours, for equipment failures ✔ Onsite technical service within 1 business day6, for equipment
failures
✔ Advance-replacement product3 within 4 hours, for equipment
failures ✔ Advance-replacement product3 within 1 business day6, for
equipment failures
✔ Technical telephone support 7 days-a-week, 24 hours-a-day4
✔ Technical telephone support 7 days-a-week, 24 hours-a-day4
✔ Telephone response within 30 minutes
✔ Telephone response within 60 minutes
✔ Access to the Kentrox Knowledge Base and other useful
tools at www.kentrox.com/support ✔ Access to the Kentrox Knowledge Base and other useful
tools at www.kentrox.com/support
✔ Software updates
SUPPORT
✔ Software updates
✔ 30% discount on training classes at the Kentrox campus
✔ 30% discount on training classes at the Kentrox campus
Kentrox Care Onsite 5x8x4 provides: Kentrox Care Onsite 5x8xNBD provides:
✔ Onsite technical service within 4 hours5 during the typical ✔ Onsite technicians available within 1 business day6, for
work day, for equipment failures equipment failures
✔ Advance-replacement product3 within 4 hours5 during the ✔ Advance-replacement product3 within 1 business day6, for
work day, for equipment failures equipment failures
✔ Technical telephone support during normal business hours ✔ Technical telephone support during normal business hours
✔ Access to the Kentrox Knowledge Base and other useful ✔ Access to the Kentrox Knowledge Base and other useful
tools at www.kentrox.com/support tools at www.kentrox.com/support
✔ 30% discount on training classes at the Kentrox campus ✔ 30% discount on training classes at the Kentrox campus
54 800-733-5511
SUPPORT PLANS
✔ Advance-replacement product3 within 1 business day6, for ✔ Major and maintenance releases for embedded software
equipment failures via the web
✔ Technical telephone support 7 days-a-week, 24 hours-a-day4 ✔ Major releases include new enhancements to existing features
packaged as part of the originally purchased product
✔ Telephone response within 60 minutes
✔ Maintenance releases include minor software upgrades and
✔ Access to the Kentrox Knowledge Base and other useful fixes that improve operability
tools at www.kentrox.com/support
✔ Access to software updates, the Kentrox Knowledge Base
✔ Software updates and other useful tools at www.kentrox.com/support
SUPPORT
Kentrox Care Exchange NBD
Kentrox Care Exchange NBD is designed for those customers who do
not require technical assistance, but would like to leverage Kentrox
spare inventory in the event of an equipment failure. This level of
service ensures you will have replacement product on your doorstep
by the next business day (NBD).
1. The Onsite 7x24x4 and the Onsite 5x8x4 plans are not available in all locations. To verify the eligibility of your equipment location, please contact
maintenance@kentrox.com or call 800-733-5511, Option 51.
2. Onsite support and advance replacements are for equipment failures only.
3. AAC and CellSMART replacement products will be provided at a component level.
4. Telephone support available at no charge outside of normal business hours for service-affecting problems only.
5. Call must be received by 1:00 p.m. local time, excluding weekends and holidays.
6. Call must be received by 1:00 p.m. Pacific time, excluding weekends and holidays.
PLEASE NOTE: Normal business hours are defined as 6:00 a.m. to 5:00 p.m. Pacific time, excluding weekends and holidays.
NBD = Next Business Day
www.kentrox.com 55
SUPPORT PLANS
56 800-733-5511
INSTALLATION SERVICES
✔ Completing a check of installed equipment in the ✔ Assisting customer with configuring physical
SUPPORT
operating environment interfaces sufficient to demonstrate basic connectivity
✔ Equipment familiarization for customer’s operator ✔ Equipment familiarization for customer’s operator
www.kentrox.com 57
TECHNICAL TRAINING
58 800-733-5511
Price List
• Access Equipment
• Services and Support
• Cables, Accessories
59
PRICE LIST
10201.................... Protocol Module; Packet Protocol Module (1 port; up to 52 Mbps) .............................................................................. $4,450.00 .................. 47
10202.................... Protocol Module; Quad Cell Protocol Module (4 ports; up to 2.048 Mbps/port) ........................................................... $3,750.00 .................. 47
10203.................... Protocol Module; Quad CBR/Packet Protocol Module (2 packets/2 CBR ports; or 4 CBR ports) ..................................... $3,750.00 .................. 47
10204.................... Protocol Module; Enhanced Traffic Shaping Cell Protocol Module................................................................................ $4,450.00 .................. 47
10205.................... Protocol Module; Quad Packet Protocol Module (4 ports, 2.048 Mbps/port) ................................................................ $4,650.00 .................. 47
10207.................... Protocol Module; Octal CES/CBR Protocol Module ....................................................................................................... $5,000.00 .................. 47
10300.................... Physical Layer Module; DS3 Module ............................................................................................................................ $1,995.00 .................. 47
10301.................... Physical Layer Module; HSSI Module............................................................................................................................ $1,095.00 .................. 47
10302.................... Physical Layer Module; Quad T1 (DSX-1) Module......................................................................................................... $1,795.00 .................. 47
10304.................... Physical Layer Module; OC-3c/STM-1 MM Fiber Module .............................................................................................. $1,995.00 .................. 47
10305.................... Physical Layer Module; OC-3c/STM-1 SM Fiber Module ............................................................................................... $3,295.00 .................. 47
10306.................... Physical Layer Module; E3 Module............................................................................................................................... $2,895.00 .................. 47
10307.................... Physical Layer Module; Quad E1 Module ..................................................................................................................... $2,395.00 .................. 47
10309.................... Physical Layer Module; Quad V.35/EIA-530 Module ..................................................................................................... $1,395.00 .................. 47
10314.................... Physical Layer Module; Octal (8-port) DSX-1 Module ................................................................................................... $2,795.00 .................. 47
10315.................... Physical Layer Module; Octal (8-port) E1 Module ......................................................................................................... $3,395.00 .................. 47
10317.................... Physical Layer Module; Octal (8-port) DS-1 (w/CSU) Module ........................................................................................ $2,995.00 .................. 47
10318.................... Physical Layer Module; Octal (8-port) T1 IMA Module.................................................................................................. $5,995.00 .................. 47
60 800-733-5511
PRICE LIST
10319.................... Physical Layer Module; Octal (8-port) E1 IMA Module.................................................................................................. $6,495.00 .................. 47
15951.................... DataSMART T3/E3 IDSU, AC ....................................................................................................................................... $4,595.00................... 21
15952.................... DataSMART T3/E3 IDSU, DC ....................................................................................................................................... $4,595.00................... 21
20001-310 ............ CellSMART 201t, T1 IMA to HSSI, 100 to 240VAC .................................................................................................... $10,995.00................... 50
20002-310 ............ CellSMART 201e, E1 IMA to HSSI, 100 to 240VAC .................................................................................................... $12,095.00................... 50
20003-310 ............ CellSMART 202t, T1 IMA to V.35, (6 Mbps), 100 to 240VAC ..................................................................................... $10,995.00................... 50
20004-310 ............ CellSMART 202e, E1 IMA to V.35, (8 Mbps), 100 to 240VAC .................................................................................... $12,095.00................... 50
20007-310 ............ CellSMART 204t, T1 IMA to OC3/STM-1, 100 to 240VAC ......................................................................................... $10,995.00 .................. 50
20008-310 ............ CellSMART 204e, E1 IMA to OC3/STM-1, 100 to 240VAC ........................................................................................ $12,095.00 .................. 50
20009-310 ............ CellSMART 205t, T1 IMA to DS-3, 100 to 240VAC .................................................................................................... $10,995.00 .................. 50
20010-310 ............ CellSMART 205e, E1 IMA to E3, 100 to 240VAC ....................................................................................................... $12,095.00 .................. 50
70458-300 ............ AAC Manager (for AAC-3, AAC-2 and CellSMART), Release 3.0.0 ................................................................................. $995.00................... 48
72071.................... Power Supply for Universal Power Tray, 100 Watts.......................................................................................................... $450.00................... misc.
72073.................... 48 VDC, 100 W (1 shelf) ............................................................................................................................................... $475.00................... 23, 28
72075.................... 48 VDC, 100 W x2 (2 shelves) or 100 W redundant (1 shelf) ......................................................................................... $900.00................... 23, 28
72079.................... 48 VDC, 100 W x4 (4 shelves) or 100 W redundant (2 shelves).................................................................................... $1,750.00................... 23, 28
72273.................... Heat Baffle, Universal Shelf ............................................................................................................................................. $72.00................... 23, 28
72456.................... DataSMART 456 E1 Single-port, Stand-alone DSU/CSU ............................................................................................... $1,495.00................... 24
72458.................... DataSMART 458 E1 Single-port, Add/Drop, Stand-alone DSU/CSU .............................................................................. $1,995.00................... 24
72521.................... DataSMART E1 MAX Dual-port, AC, DSU/CSU ............................................................................................................ $2,495.00................... 27
72552.................... DataSMART 552 56/64k Plug-in DSU/CSU ...................................................................................................................... $795.00................... 28
72554.................... DataSMART 554 T1 Single-port, Plug-in DSU/CSU ....................................................................................................... $1,495.00................... 23
72558.................... DataSMART 558 T1 Single-port, Add/Drop, Plug-in DSU/CSU ...................................................................................... $1,995.00................... 23
72561.................... DataSMART T1 MAX Dual-port, AC, DSU/CSU ............................................................................................................ $2,495.00................... 25
72651.................... Satellite 651 T1/FT1 DSU/CSU ........................................................................................................................................ $679.00................... 29
72656.................... DataSMART 656 T1 DSU/CSU with Ethernet ............................................................................................................... $1,495.00................... 22
72658.................... DataSMART 658 T1 Add/Drop DSU/CSU with Ethernet ............................................................................................... $1,995.00................... 22
72696.................... DataSMART 696 T1 Single-port, Frame Monitoring, Stand-alone DSU/CSU.................................................................. $1,795.00................... 20
72698.................... DataSMART 698 T1 Single-port, Frame Monitoring, Add/Drop, Stand-alone DSU/CSU................................................. $2,295.00................... 20
72761.................... DataSMART T1 MAX, Dual-port Add/Drop, AC, DSU/CSU ........................................................................................... $2,695.00................... 25
72765.................... DataSMART T1 MAX, Dual-port Add/Drop, DC, DSU/CSU ........................................................................................... $2,995.00................... 25
72771 ................... DataSMART T1 MAX, Quad-port Add/Drop, AC, DSU/CSU .......................................................................................... $3,595.00................... 25
72775 ................... DataSMART T1 MAX, Quad-port Add/Drop, DC, DSU/CSU .......................................................................................... $3,595.00................... 25
75000.................... ServicePoint Manager ................................................................................................................................................. $1,995.00................... 19
77020.................... CSU Standard Shelf, 12 slots .......................................................................................................................................... $800.00................... 34, 35
77030.................... CSU Mini Shelf, 4 slots ................................................................................................................................................... $600.00................... 34, 35
77070.................... Blank Panel for CSU shelves (empty slots) ......................................................................................................................... $30.00................... 34, 35
77092.................... Power Supply, 48 VDC, 1.25 amps ................................................................................................................................. $200.00................... 34, 35
77094.................... Power Supply, 24 VDC wall mt., 0.5 amps ........................................................................................................................ $75.00................... 34, 35
PRICE LIST
77096.................... 19" Mounting Bracket Kit for one CSU ............................................................................................................................ $15.00................... 34, 35
77101.................... T-SMART Shelf Interface Unit.......................................................................................................................................... $220.00................... 34
77102.................... T-SMART Group Controller Unit ..................................................................................................................................... $995.00................... 34
77115.................... T-SERV II CSU Plug-in................................................................................................................................................... $1,000.00................... 35
77120.................... T-SMART CSU Plug-in .................................................................................................................................................. $1,950.00................... 34
77532.................... M-PATH 532 CSU Stand-alone .................................................................................................................................... $2,250.00................... 32, 41
77537.................... M-PATH 537 CSU Plug-in ............................................................................................................................................ $1,950.00................... 32, 33, 41
77538.................... M-PATH 538 CSU with Ethernet interface.................................................................................................................... $2,250.00................... 32, 33, 41
77731.................... CrossPATH II Triple T1 CSU, AC.................................................................................................................................... $2,995.00................... 26
77732.................... CrossPATH IIe Triple T1 CSU with Ethernet ................................................................................................................... $3,395.00................... 40
77750.................... CrossPATH 3G 8-port T1 Cross Connect ...................................................................................................................... $4,000.00................... 39
77760.................... CrossPATH 3G 16-port T1 Cross Connect .................................................................................................................... $5,000.00................... 39
77765.................... CrossPATH 3G 16-port T1 Cross Connect w/DS3 ......................................................................................................... $6,000.00................... 39
77819.................... 19” CSU Mounting Tray for up to 2 units ......................................................................................................................... $60.00................... 34, 35
77823.................... 23” CSU Mounting Tray for up to 2 units ......................................................................................................................... $60.00................... 34, 35
77830.................... Adapter; RJ48H Socket to 12x RJ48C Socket ................................................................................................................. $160.00................... misc.
77840.................... Adapter; RJ48H Plug to 12x DA15S ............................................................................................................................... $225.00................... misc.
All prices listed in this catalog are U.S. list price. Prices subject to change.
www.kentrox.com 61
PRICE LIST
All prices listed in this catalog are U.S. list price. Prices subject to change.
62 800-733-5511
PRICE LIST
13213.................... Kentrox Care Onsite 5x8x4: AAC Components ............................................................................................................... $679.00................... 53-56
13602.................... Kentrox Care Onsite 7x24xNBD: CellSMART ................................................................................................................ $2,350.00................... 53-56
13603.................... Kentrox Care Onsite 7x24x4: CellSMART ..................................................................................................................... $3,800.00................... 53-56
13604.................... Kentrox Care Basic 7x24xNBD: CellSMART .................................................................................................................. $1,100.00................... 53-56
13609.................... Kentrox Care Exchange NBD: CellSMART ....................................................................................................................... $479.00................... 53-56
13612.................... Kentrox Care Onsite 5x8xNBD: CellSMART .................................................................................................................. $1,649.00................... 53-56
13613.................... Kentrox Care Onsite 5x8x4: CellSMART ....................................................................................................................... $2,999.00................... 53-56
13702.................... Kentrox Care Onsite 7x24xNBD: T3/E3 IDSU ................................................................................................................... $725.00................... 53-56
13703.................... Kentrox Care Onsite 7x24x4: T3/E3 IDSU ..................................................................................................................... $1,100.00................... 53-56
13704.................... Kentrox Care Basic 7x24xNBD: T3/E3 IDSU ..................................................................................................................... $425.00................... 53-56
13709.................... Kentrox Care Exchange NBD: T3/E3 IDSU ....................................................................................................................... $149.00................... 53-56
13712.................... Kentrox Care Onsite 5x8xNBD: T3/E3 IDSU ..................................................................................................................... $559.00................... 53-56
13713.................... Kentrox Care Onsite 5x8x4: T3/E3 IDSU .......................................................................................................................... $999.00................... 53-56
13802.................... Kentrox Care Onsite 7x24xNBD: Q-Series Routers ........................................................................................................... $239.00................... 53-56
13803.................... Kentrox Care Onsite 7x24x4: Q-Series Routers ............................................................................................................... $329.00................... 53-56
13804.................... Kentrox Care Basic 7x24xNBD: Q-Series Routers ............................................................................................................. $149.00................... 53-56
13809.................... Kentrox Care Exchange NBD: Q-Series Routers ................................................................................................................. $79.00................... 53-56
13810.................... Kentrox Care Software: Q-Series Routers .......................................................................................................................... $85.00................... 53-56
13812.................... Kentrox Care Onsite 5x8xNBD: Q-Series Routers ............................................................................................................. $189.00................... 53-56
13813.................... Kentrox Care Onsite 5x8x4: Q-Series Routers ................................................................................................................. $299.00................... 53-56
13902.................... Kentrox Care Onsite 7x24xNBD: CrossPATH 3G Cross Connects ..................................................................................... $849.00................... 53-56
13903.................... Kentrox Care Onsite 7x24x4: CrossPATH 3G Cross Connects ....................................................................................... $1,459.00................... 53-56
13904.................... Kentrox Care Basic 7x24xNBD: CrossPATH 3G Cross Connects ....................................................................................... $499.00................... 53-56
13909.................... Kentrox Care Exchange NBD: CrossPATH 3G Cross Connects .......................................................................................... $179.00................... 53-56
13912.................... Kentrox Care Onsite 5x8xNBD: CrossPATH 3G Cross Connects ....................................................................................... $659.00................... 53-56
13913.................... Kentrox Care Onsite 5x8x4: CrossPATH 3G Cross Connects ......................................................................................... $1,349.00................... 53-56
14202.................... Kentrox Care Onsite 7x24xNBD: 56/64k, T1, E1 DSU/CSUs ............................................................................................. $275.00................... 53-56
14203.................... Kentrox Care Onsite 7x24x4: 56/64k, T1, E1 DSU/CSUs .................................................................................................. $425.00................... 53-56
14204.................... Kentrox Care Basic 7x24xNBD: 56/64k, T1, E1 DSU/CSUs ............................................................................................... $150.00................... 53-56
14209.................... Kentrox Care Exchange NBD: 56/64k, T1, E1 DSU/CSUs ................................................................................................... $89.00................... 53-56
14212.................... Kentrox Care Onsite 5x8xNBD: 56/64k, T1, E1 DSU/CSUs ............................................................................................... $205.00................... 53-56
14213.................... Kentrox Care Onsite 5x8x4: 56/64k, T1, E1 DSU/CSUs .................................................................................................... $359.00................... 53-56
When ordering service renewal of an existing Kentrox Care Plan, place the suffix “SRN” after the part
number; for example 13803-SRN.
Technical Training
133311.................. Customer Site: AAC Setup, Configuration and Troubleshooting, 2 day, up to 6 students ............................................. $6,500.00................... 58
PRICE LIST
133312.................. Customer Site: AAC Setup, Configuration and Troubleshooting, 3 day, up to 6 students ............................................. $9,250.00................... 58
133313.................. Customer Site: AAC Setup, Configuration and Troubleshooting, 4 day, up to 6 students ........................................... $11,750.00................... 58
133315.................. Customer Site: AAC ATM Managed Services (Visual Networks), 1 day, up to 6 students .............................................. $3,500.00................... 58
133317.................. Customer Site: AAC Setup, Config. and Troubleshooting + AAC ATM Managed Services, 3 day, up to 6 students ....... $9,250.00................... 58
133318.................. Customer Site: AAC Setup, Config. and Troubleshooting + AAC ATM Managed Services, 4 day, up to 6 students ..... $11,750.00................... 58
133319.................. Customer Site: AAC Setup, Config. and Troubleshooting + AAC ATM Managed Services, 5 day, up to 6 students ..... $14,000.00................... 58
133352.................. Kentrox Campus: AAC Setup, Configuration and Troubleshooting, 3 day, per student ................................................. $1,495.00................... 58
133355.................. Kentrox Campus: AAC ATM Managed Services (Visual Networks), 1 day, per student ..................................................... $595.00................... 58
133358.................. Kentrox Campus: AAC ATM Managed Services (Visual Networks), 4 day, per student .................................................. $1,795.00................... 58
133511.................. Customer Site: DSU Setup, Configuration and Troubleshooting, 1 day, up to 6 students .............................................. $3,500.00................... 58
133512.................. Customer Site: DSU Setup, Configuration and Troubleshooting, 2 day, up to 6 students .............................................. $6,500.00................... 58
133552.................. Kentrox Campus: DSU Setup, Configuration and Troubleshooting, 2 day, per student .................................................... $695.00................... 58
133811.................. Customer Site: Q-Series Basic Configuration and Maintenance Lecture, 1 day, up to 6 students .................................. $1,800.00................... 58
133812.................. Customer Site: Q-Series Advanced Configuration and Maintenance Lecture, 1 day, up to 6 students ........................... $1,800.00................... 58
133851.................. Kentrox Campus: Q-Series Basic Configuration and Maintenance Lecture, 1 day, per student ......................................... $400.00................... 58
133852.................. Kentrox Campus: Q-Series Advanced Configuration and Maintenance Lecture, 1 day, per student ................................. $400.00................... 58
www.kentrox.com 63
PRICE LIST
930xx121 ........... DA15P to RJ48C Plug (Available in various lengths) 95001074........... DB25P to MRAC34S (V.35) Adapter, 1 Foot ................... $40.00
95001089........... DB25P to DB25S and DA15S, 1 Foot ........................... $130.00
93005121........... DA15P to RJ48C Plug, 5 Feet ........................................ $45.00
95001091........... DB25P to MRAC34S and DA15S, 1 Foot ..................... $160.00
930xx131 ........... DA15P to DA15P (Available in various lengths)
950xx094 ........... DB25P to RJ48C Plug (Available in various lengths)
93005131........... DA15P to DA15P, 5 Feet................................................ $45.00
95005094........... DB25P to RJ48C Plug, 5 Feet ......................................... $30.00
93010132........... DA15P to DA15P, Crossover, 10 Feet ............................. $55.00
95010099........... RJ45S to RJ45S, Crossover, 10 Feet................................ $40.50
930xx143 ........... RJ48C Plug to RJ48C Plug (Available in various lengths)
93010143........... RJ48C Plug to RJ48C Plug, 10 Feet ................................ $35.00
CABLES-960 Series
930xx144 ........... RJ48C Plug to RJ48C Plug, Crossover (Available in various lengths)
960xx010 ........... BNC Plug to BNC Plug (Available in various lengths)
93010144........... RJ48C Plug to RJ48C Plug, Crossover, 10 Feet ............... $35.00
96010010........... BNC Plug to BNC Plug, 10 Feet ..................................... $45.00
930xx151 ........... DA15S to RJ48C Plug (Available in various lengths) 960xx011 ........... HSSI Plug to HSSI Plug (Available in various lengths)
93005151........... DA15S to RJ48C Plug, 5 Feet ........................................ $45.00 96005011........... HSSI Plug to HSSI Plug, 5 Feet ....................................... $74.00
930xx152 ........... RJ48C Plug to DA15S, Crossover (Available in various lengths) 96010012........... HSSI Plug to HSSI Plug, Crossover, 10 Feet ..................... $84.00
93005152........... RJ48C Plug to DA15S, Crossover, 5 Feet ........................ $38.00
930xx171 ........... 25 Pair RJ48H Plug to Plug (Available in various lengths)
93002171........... 25 Pair RJ48H Plug to Plug, 2 Feet ................................. $68.00
930xx202 ........... DA15S to DA15S, Crossover (Available in various lengths)
93010202........... DA15S to DA15S, Crossover, 10 Feet ............................ $55.00
PRICE LIST
All prices listed in this catalog are U.S. list price. Prices subject to change.
64 800-733-5511