Académique Documents
Professionnel Documents
Culture Documents
Biopharmaceutical
Tubing Selection Guide
Tubing Selection
C-Flex® S a n i -Te c h ® PharMed® PharmaPure® PharmaFluor®
Guide
CONTAINMENT
FLUID
TRANSFER
FILTRATION
CONNECTORS
& FLOW
CONTROL
CLOSURE
SYSTEMS
SINGLE-USE
ASSEMBLIES
Your Trusted Partner Saint-Gobain Bioprocess Solutions combines material expertise and application knowledge
to offer a wide array of custom and configurable fluid management solutions. Place your
in fluid management trust in our industry-leading quality systems, technical support and validation services to
solutions find the optimum answers to your most complex fluid management challenges.
Sani-Tech® Sani-Tech®
STHT®-C Ultra-C Sani-Tech®
STHT®-65 Ultra-65 STHT®-R
Sani-Tech® STHT-C and STHT-65 are widely Sani-Tech® Ultra-C and Ultra-65 are the next Sani-Tech® STHT-R is a braid-reinforced,
validated platinum-cured silicone tub- generation in ultra-pure platinum-cured platinum-cured silicone tubing developed
ing. Ideal for bioprocessing applications, silicone tubing. Ultra-low extractables and for high-pressure fluid transfer applications.
Sani-Tech STHT-C and STHT-65 tubing longer peristaltic pump life make this tubing Sani-Tech STHT-R withstands repeated
may be sterilized via gamma irradiation ideal for the biopharmaceutical industry. autoclaving and is manufactured with
or autoclave. Laser-marked part numbers Laser-marked part numbers and lot codes Sani-Tech 65 resin, a high purity and
and lot codes provide product traceability. provide product traceability. Sani-Tech commonly validated material in the
Sani-Tech STHT-C has a nominal hardness STHT-C has a nominal hardness of 50-Shore biopharmaceutical industry.
of 50-Shore A and Sani-Tech STHT-65 has a A and Sani-Tech STHT-65 has a nominal
nominal hardness of 65 Shore A. hardness of 65 Shore A.
PharMed® PharmaFluor®
PharmaPure® BPT FEP
PharmPure® is the next generation peristaltic PharMed® BPT is the trusted standard PharmaFluor FEP is an ideal choice for
pump tubing for the biopharmaceutical for peristaltic pump applications. With applications requiring high purity or
industry. Designed with multiple layers, a long history of success in biopharma- contact with aggressive chemicals. The
its low spallation properties reduce ceutical applications, PharMed BPT will low absorption characteristics and low
downstream particle contamination. withstand the most aggressive peristaltic extractables of PharmaFluor FEP make it
pump conditions. especially suitable for highly sensitive fluid
transfer during purification and aseptic
filling operations.
NR Not Recommended
+ Good
++ Very Good
+++ Excellent
Sani-Tech® Sani-Tech®
STHT®-C Ultra-C
C-Flex® 374 C-Flex® Sani-Tech® Sani-Tech® Sani-Tech® PharMed® PharmaFluor®
C-Flex® 082 C-Flex® 072 Braided STHT-65 Ultra-65 STHT®-R PharmaPure® BPT FEP
Material Type TPE TPE Braided Silicone Silicone Braided TPE TPE Fluoropolymer
TPE Silicone
Hardness 60 Shore A 60 Shore A 60 Shore A 50 Shore A 50 Shore A 65 Shore A 65 Shore A 64 Shore A 55 Shore D*
(typical) 65 Shore A 65 Shore A
Appearance Translucent Opaque Translucent, Translucent Translucent Translucent Opaque Opaque Translucent
reinforced
Aseptic Sealing Yes Yes No No No No No No No
and Welding
Peristaltic + ++ NR + ++ NR +++ +++ NR
Pump Life
Low ++ ++ ++ + + + ++ ++ +++
Preservative
Absorption
Extraction + + + ++ +++ ++ + + +++
Profile
Working No No Yes No No Yes No No Yes
Pressure
>90psi
(690 kPa)
Autoclave Yes Yes Yes Yes Yes Yes Yes Yes Yes
Sterilization
Max Temp 135°C 135°C 135°C 260°C 260°C 260°C 135°C 135°C 204°C
(275°F) (275°F) (275°F) (500°F) (500°F) (500°F) (275°F) (275°F) (400°F)
Minimum Temp -45°C -45°C -45°C -62°C -62°C -62°C -40°C -40°C -73°C
(-50°F) (-50°F) (-50°F) (-80°F) (-80°F) (-80°F) (-40°F) (-40°F) (-100°F)
General ++ ++ ++ ++ ++ ++ ++ ++ +++
Chemical
Resistance
Can be included Yes Yes Yes Yes Yes Yes Yes Yes No
in molded
assemblies
Portage, WI
Traverse City, MI Taunton, MA Neuss, DEU
Poestenkill, NY
Gaithersburg, MD
Akron, OH
Clearwater, FL
Lyon, FRA
Suwa, JPN
Garden Grove, CA
Minhang, CHN
Hangzhou, CHN
Bangalore, IND
IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain
Performance Plastics products for all intended uses and that the materials to be used comply with all
applicable medical regulatory requirements. Saint-Gobain Performance Plastics assumes no responsibility
for any product failures that occur due to misuse of the materials it provides arising out of the design,
fabrication or application of the products into which the materials are incorporated.
WARRANTY: For a period of 12 months from the date of first sale, Saint-Gobain Performance Plastics warrants
this product to be free of defects in materials and workmanship. Our only obligation will be to replace any
portion proving defective, or at our option, to refund the purchase price thereof.
Saint-Gobain Performance Plastics SAINT-GOBAIN PERFORMANCE PLASTICS DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
www.biopharm.saint-gobain.com
FLS-5292-0318-BPS ©2018 Saint-Gobain Performance Plastics