Vous êtes sur la page 1sur 4

Fibre Auxiliaries | Pretreatment | Dyeing | Colours | TEXTILE PRINTING | Finishing | Coating | Garment

TUBIFAST AS 5087 FF
SOFT, FORMALDEHYDE-FREE, CONCENTRATED
Fast. Faster!
FORMALDEHYDE-FREE
We take care The fastness level significantly increases with higher
amounts of binder. High quality textiles need to have
Sustainably printed textiles maintain their bright and a soft handle. Therefore, high amounts of binder can
brilliant colours also after several washings. Main be used only when the binder is soft. With a Tg
requirement for sustainability, i.e. long life cycle, is a (Glass transition) of minus 14 °C, TUBIFAST AS
high fastness level. No need to use crosslinking 5087 FF belongs to the group of "soft binders". The
mechanisms with a toxicological classification when required amount of binder for a good fastness level
printing with pigments. ZERO formaldehyde and good depends on the applied amount of pigment dyestuff.
fastnesses stand for sustainable pigment printing. For light shades 80 g/kg TUBIFAST AS 5087 FF are
needed for optimal fastnesses.
For dark colours or poor fabric quality, the binder
concentration can increase to >200 g/kg. Even with
High product concentration such high amounts of binder, prints with TUBIFAST
AS 5087 FF impart a soft handle.
TUBIFAST AS 5087 FF is a sustainable product with
50 % active content because no water needs to be
transported. Less transportation weight leads to a
remarkable reduction of fuel consumption.

The application amount of binder in the print paste is Maximum pigment concentration
proportional to the binder concentration.
The pigment quantity is decisive for the fastness level
g/kg Binder (38 %) x 0.76 = g/kg TUBIFAST AS 5087 FF
of a pigment print. Every pigment has its own colour
structure curve. Information can be taken from the
shade card. Pigment saturation may not be exceeded.
Not only the reduced fuel consumption during
transportation make concentrated binders economical, Maximum pigment
but also handling, packaging and warehouse costs concentration
are much lower. In comparing the cost parity, the price 16
of the diluted binder has to be divided through the
factor 0.76. 12

8
K/S
Soft handle 4

Prints that haven’t blurred after many wash cycles 0


are more sustainable because the textiles can be 0 g/kg 20 g/kg 40 g/kg 60 g/kg 80 g/kg 100 g/kg
used longer. There is a direct link between fastnesses Pigment
and amount of applied binder.
NO COMPROMISE
Fast colours TUBASSIST FIX 120 W is applied when the fixation
conditions are not optimal. The blocking components
The ratio of binder to pigment depends on the material already split off at approx. 130 °C.
quality. Normally the calculation formula for a 38 %
binder is:
g/kg binder = 100 + (3 x g/kg pigment) Softener for optimal dry rubbing
fastness
For achieving a high fastness level, less binder is
needed when using TUBIFAST AS 5087 FF with a Silicone softeners improve the dry rubbing fastness
50 % active content. by about 1 grade. TUBISOFT SEM and TUBISOFT PS
have this property. These softeners have no impact
250 g/kg on the wet fastness properties. In addition, a much
Binder = 100 + (g/kg x 3)
better handle with higher application amounts can be
200 g/kg achieved.
Binder = 76 + (g/kg x 2,3)

150 g/kg Emulsifier / Rheological additive


Binder 38 % TUBIGAT AR improves the running properties of
100 g/kg
binders. Even under extremely hot production conditions
TUBIFAST AS 5087 FF (50 %) there is no premature film formation. The rheological
50 g/kg additive reduces the print paste application and
1 g/kg 20 g/kg 40 g/kg guarantees a print with sharp outlines even on
insufficiently pretreated fabric.
Together with the thickener TUBIVIS STAR a level
surface print with good colour depth can be achieved.
TUBIFAST AS 5087 FF cannot build
any formaldehyde
Standard recipe
Standard, self-crosslinking binders form a stable binder
film through crosslinkage with the functional N-methylol
This recipe is suited for a sustainable pigment print
acrylamide. Formaldehyde is formed during crosslinkage
with finish.
with N-methylol acrylamide. With TUBIFAST AS
5087 FF crosslinkage is not achieved through the
release of formaldehyde groups. This crosslinkage is
equivalent with the fastness level achieved through TUBIGAT AR 10 g/kg
crosslinking. With the AATCC test-method 112-2003
and DIN EN ISO 14184-2 (part 2 formaldehyde release TUBISOFT SEM 20 g/kg
of formaldehyde), it can be checked whether a binder TUBIFIX P 70 12 g/kg
releases formaldehyde. LAW 112 tests only free
formaldehyde. The formaldehyde attached through TUBIFAST AS 5087 FF 120 g/kg
urea that nearly always exists is not registered.
TUBIVIS STAR 38 g/kg
BEZAPRINT Pigment x g/kg
Formaldehyde-free fixing agent
Fixing agent based on isocyanate does not release Formaldehyde-free easy care finish with softener.
formaldehyde during crosslinkage. Blocked isocyanate
fixing agent have a good print paste stability. We
recommend TUBIFIX P 70 and TUBASSIST FIX 120 W. ARRISTAN 71 30 g/kg
Fixing agents are applied proportionally to the binder REAKNITT ZF 80 g/kg
quantity: approx. 10 %.
CHT-KATALYSATOR ABT 8 g/kg
CHT R. BEITLICH GMBH | Bi smarckstraße 102 | D-72072 Tübi ngen | Tel +49 7071 154-0 | Fax +49 7071 154-290 | www.cht.com | i nfo@cht.com
09/2015

Vous aimerez peut-être aussi