Académique Documents
Professionnel Documents
Culture Documents
ROEPC
Contents
1 Function
2 Data
2.1 BSC Exchange Properties
3 Strapping
4 Glossary
5 References
5.1 Application Information
5.2 Other References
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 2 of 47
1 Function
Radio Operation and Maintenance Subsystem (ROS) in Base Station Controller (BSC) controls
the functional behavior of the exchange using exchange properties. The value of the property
defines the choice of functional alternatives.
This Application Information describes the BSC exchange properties that are possible to be
printed and changed.
The handling of the BSC exchange properties depends on the type of the parameter that can be
mandatory or optional. If the type of the property is mandatory, the application-dependent
value of the parameter will be set with the change command before it can be used. If the type
is optional, the default value given in this Application Information is used as a preset value.
However, a new value within the value range can be set with the change command. The value
is numeral if no other is stated.
The blocks listed as owners after each property informs block ROEPC during system restart
which exchange properties they need. When the property value is changed by the command
RAEPC, block ROEPC sends the request to each one of the owners to check if the property value
is accepted or not. If all owners accept the new property value, block ROEPC sends it for storage
in the owners, which perform actions according the new value.
The properties are listed under the function group where they belong according to FS Survey.
Modified Properties
AMRFRSUPPORT AMRHRSUPPORT BSSRELEASE
CLMRKMSG EBANDINCLUDED FBCHALLOC
GPRSNWMODE MAXNOSDCCHTRX MCCSUPPORT
MNCDIGITHAND MSCREL PCUQOS
SGSNREL TCHOPTIMIZATION TFOPRIO
Removed Properties
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 3 of 47
2 Data
The BSC exchange properties listed in Table 2 are grouped according to the function and they
are fully described in the relevant tables.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 4 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 5 of 47
AQMMAXIPSIZE Maximum Internet Protocol (IP) packet size for Active Queue
Management (AQM)
This exchange property specifies the maximum size of IP packet
to discard when AQM is used. The value must be set higher or
equal to the value of exchange property AQMMINIPSIZE. The value
is given in bytes.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
Numeral 100-2000
Default value: 1700
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 6 of 47
Numeral 100-2000
Default value: 300
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 7 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 8 of 47
1 Activated
Default value: 0
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 9 of 47
EITGMAXUSEDL Maximum usage for DL EIT TBFs for B-TBF or G-TBF mode
This exchange property specifies how much of the available
channel capacity, left for EIT, can be used for DL EIT TBFs for B-
TBF or G-TBF mode. The value is given in tens of percent, for
example the vaue 1 means 10%.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
Numeral 0-20
Default value: 10
This exchange property is owned by the block RGCNT.
EITGMAXUSEUL Maximum usage for UL EIT TBFs for B-TBF or G-TBF mode
This exchange property specifies how much of the available
channel capacity, left for EIT, can be used for UL EIT TBFs for B-
TBF or G-TBF mode. The value is given in tens of percent, for
example the value 1 means 10%.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
Numeral 0-40
Default value: 10
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 10 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 11 of 47
results.
1 The function Locating will not wait for
measurement results, but will continue and send
the cell candidate list even though there may be
no measurement result available.
Default value: 0
This exchange property is owned by the block RQUPD.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 12 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 13 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 14 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 15 of 47
conditions.
1 The used MCS reduces the BLER over the air
interface in all radio conditions but may also
reduce throughput in good radio conditions.
2 The used MCS reduces the BLER further over the
air interface in all radio conditions but may also
reduce throughput in good radio conditions.
Default value: 1
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 16 of 47
MSQUEUING MS Queuing
This exchange property specifies whether the MS Queuing
functionality is not activated, activated unconditionally, or is
activated with exemption for VGCS request.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
0 Not activated
1 Activated
2 Activated; Voice Group Channel allocation and
Consecutive Talker allocation requests precede the
queue.
Default value: 0
This exchange property is owned by the blocks RMQ, RMCC,
RMCASS, RMCHO, RMVGCH and RNLCT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 17 of 47
0 Not activated
1 Activated
Default value: 0
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 18 of 47
This exchange property sets the packet idle list timer. When an
on-demand PDCH becomes idle it is placed in idle list for the
packet switched domain and this timer is started. When the timer
expires for a PDCH, the channel is returned to circuit switched
domain. The value is given in seconds.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
Numeral 1-3600
Default value: 10
This exchange property is owned by the block RGCNT.
PILTIMERFLEX Packet idle list timer factor for PDCHs with flexibly allocated Abis
path
This exchange property defines together with exchange property
PILTIMER the timer value which specifies:
The time a PDCH with flexibly allocated Abis path
must remain in packet idle list.
The time, after the last E-TBF was removed from
an E-PDCH with flexibly allocated Abis path, that a
capability downgrade of this E-PDCH is initiated.
The timer value is calculated in the following way:
timer value = PILTIMER * PILTIMERFLEX / 100
The value is given as a percentage of exchange property
PILTIMER value.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
Numeral 0-100
Default value: 50
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 19 of 47
6 PULS enabled
Interval = 120 ms for EUL, 1 PDCH scheduled
Interval = 120 ms for DRL
7 PULS enabled
Interval = 140 ms for EUL, 1 PDCH scheduled
Interval = 160 ms for DRL
8 PULS enabled
Interval = 160 ms for EUL, 1 PDCH scheduled
Interval = 160 ms for DRL
9 PULS enabled
Interval = 180 ms for EUL, 1 PDCH scheduled
Interval = 200 ms for DRL
10 PULS enabled
Interval = 200 ms for EUL, 1 PDCH scheduled
Interval = 200 ms for DRL
99 PULS enabled
Interval = 20 ms for EUL, all assigned PDCHs
Interval = 40 ms for DRL
Default value: 0
This exchange property is owned by the block RGCNT.
QOSCONVPRIO Traffic Handling Priority (THP) for QoS traffic class Conversational
This exchange property indicates the THP to set when converting
traffic class Conversational to Interactive.
The availability of the exchange property values other than the
default one depends on commercial agreements.
Property type: Optional
1 Exchange property QOSTHP1 is used for THP1.
2 Exchange property QOSTHP2 is used for THP2.
3 Parameter QOSTHP3=1 is used for THP3.
Default value: 1
This exchange property is owned by the block RGCNT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 20 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 21 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 22 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 23 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 24 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 25 of 47
The availability of the exchange property value other than the default one
depends on commercial agreements.
Property type: Optional
0 Not activated
1 Activated
Default value: 0
This exchange property is owned by the blocks RMHOEB, RQRCQS, and RQUCD.
HCSCHAVAILTIMER Interval for check of idle traffic channels for Hierarchical Cell Structures
(HCS)
This exchange property sets the time interval specified by the operator. When
expired it initiates checking of the level of idle traffic channels for active cells
for HCS. The value is given in milliseconds. The value must be given in
multiple of 100.
The availability of the exchange property values other than the default one
depends on commercial agreements.
Property type: Optional
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 26 of 47
Numeral 200-5000
Default value: 500
This exchange property is owned by the block RQRCQS.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 27 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 28 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 29 of 47
Numeral 1-31
Default value: 1
This exchange property is owned by the block RQUPD.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 30 of 47
handover.
The availability of the exchange property value other than the default one
depends on commercial agreements.
Property type: Optional
0 Not activated
1 Activated
Default value: 0
This exchange property is owned by the block RMHAIDL.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 31 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 32 of 47
0 RTLTT devices with high rate drop rate are used for
traffic seizure
1 RTLTT devices with high drop rate are used for traffic
only if there is no others available
2 RTLTT devices with high drop rate are not used for
traffic seizure
Default value: 0
This exchange property is owned by the block RTLTT.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 33 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 34 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 35 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 36 of 47
with the third digit not equal 0 then this cell must be undefined
before the property value can be changed from 2 to a lower value.
Property type: Optional
0 2-digit MNC administered and sent, all cases
1 3-digit MNC administered and sent on the A-interface
and 2-digit MNC is sent on the air-interface
2 3-digit MNC administered and sent, all cases
Default value: 0
This exchange property is owned by the blocks GCCD, GCCDA, GCCGA,
GCRLC, GCURR, RCCD , RCCDA, RMHAIDL, RTGB and RTGBIP
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 37 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 38 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 39 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 40 of 47
TRADROPNOTRAF Threshold for maximum percentage of TRA devices having high rate
of dropped calls that are not used for traffic seizure
This exchange property enables the operator to set threshold for
maximum percentage of TRA devices having high rate of dropped
calls that are not used for traffic seizure for every pool. It has effect
only if the value of exchange property TRADROPLEVEL is in range 10-
60.
The value is given in percents, except value 0.
Property type: Optional
0 TRA devices with high call drop rate are used for
traffic seizure.
1-100 This is percentage of TRA devices with high drop rate
that at maximum are not used for traffic seizure for
every pool.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 41 of 47
Default value: 0
This exchange property is owned by the block RTTPH.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 42 of 47
Numeral 40-100
Default value: 70
This exchange property is owned by the block RILCO.
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 43 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 44 of 47
This exchange property specifies the value of Time Alignment Timer (Tta)
when it is long Abis signalling delay. The value is given in deciseconds.
Property type: Optional
Numeral 2-50
Default value: 15
This exchange property is owned by the block RXCMOO.
3 Strapping
No strapping information is applicable to this block.
4 Glossary
AMR Adaptive Multi Rate
AQM Active Queue Management
ARAC Additional Radio Access Capabilities
ASIC Application Specific Integrated Circuit
Abis Interface between BSC and BTS in GSM systems
B-TBF Basic GPRS TBF
B0, B1, B2 ... Bit position in a byte; B0 is the least significant bit.
BCCH Broadcast Control Channel
BLER Block Error Rate
BSC Base Station Controller
BSS Base Station System
BTS Base Transceiver Station
CCCH Common Control Channel
CIC Circuit Identification Code
CP Central Processor
CP-PS Central Processor-Program Store
CS Coding Scheme
DL Downlink
DRL Delayed Release
DSU Device Software Unit
DTCB Distance to Cell Border
DTM Dual Transfer Mode
DYMA Dynamic FR/HR Mode Adaptation
E-PDCH EGPRS Packet Data Channel
E-TBF TBF using only E-PDCHs
E1 European digital transmission format 1 for PCM connections
EDGE Enhanced Data for Global Evolution
EFR Enhanced Full Rate
EGPRS Enhanced GPRS
EIT Ericsson Instant Talk
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 45 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 46 of 47
5 References
RXCMOO
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010
ROS, Exchange Property Commands Changeable Exchange Adaptation Page 47 of 47
file://C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ALEX_TMP\1013\alex0188.htm 12/7/2010