Académique Documents
Professionnel Documents
Culture Documents
March 2015
KA78XXE / KA78XXAE
3-Terminal 1 A Positive Voltage Regulator
Features Description
• Output Current up to 1 A The KA78XXE / KA78XXAE series of three-terminal posi-
• Output Voltages of 5, 6, 8, 9, 10, 12, 15, 18, 24 V tive regulators is available in the TO-220 / D-PAK pack-
• Thermal Overload Protection age with several fixed-output voltages, making them
useful in a wide range of applications. Each type employs
• Short-Circuit Protection
internal current limiting, thermal shut-down, and safe
• Output Transistor Safe Operating Area Protection operating area. If adequate heat sinking is provided, they
can deliver over 1 A output current. Although designed
primarily as fixed-voltage regulators, these devices can
be used with external components for adjustable voltages
and currents.
TO-220 (Dual Gauge) D-PAK
GND
GND
1. Input 1
1 2. GND
3. Output
Block Diagram
INPUT SERIES OUTPUT
PASS
1 ELEMENT 3
CURRENT
GENERATOR SOA
PROTECTION
THERMAL
PROTECTION
GND
Notes:
3. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
4. These parameters, although guaranteed, are not 100% tested in production.
Notes:
5. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
6. These parameters, although guaranteed, are not 100% tested in production.
Notes:
7. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
8. These parameters, although guaranteed, are not 100% tested in production.
Notes:
9. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
10. These parameters, although guaranteed, are not 100% tested in production.
Notes:
11. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
12. These parameters, although guaranteed, are not 100% tested in production.
Notes:
13. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
14. These parameters, although guaranteed, are not 100% tested in production.
Notes:
15. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
16. These parameters, although guaranteed, are not 100% tested in production.
Notes:
17. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
18. These parameters, although guaranteed, are not 100% tested in production.
Notes:
19. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
20. These parameters, although guaranteed, are not 100% tested in production.
Notes:
21. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
22. These parameters, although guaranteed, are not 100% tested in production.
Notes:
23. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
24. These parameters, although guaranteed, are not 100% tested in production.
Notes:
25. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
26. These parameters, although guaranteed, are not 100% tested in production.
Notes:
27. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
28. These parameters, although guaranteed, are not 100% tested in production.
Notes:
29. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
30. These parameters, although guaranteed, are not 100% tested in production.
Notes:
31. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
32. These parameters, although guaranteed, are not 100% tested in production.
6 3
VI = 10V TJ = 25°C
VO = 5V ΔVO = 100mV
IO = 5mA
5.75 2.5
QUIESCENT CURRENT (mA)
5.25 1.5
5 1
4.75 .5
4.5 0
-50 -25 0 25 50 75 100 125 0 5 10 15 20 25 30 35
JUNCTION TEMPERATURE (°C) INPUT-OUTPUT DIFFERENTIAL (V)
1.02 7
VI – VO = 5V TJ = 25°C
NORMALIZED OUTPUT VOLTAGE (V)
IO = 5mA VO = 5V
IO = 10mA
6.5
QUIESCENT CURRENT (mA)
1.01
6
1 5.5
5
0.99
4.5
0.98 4
-50 -25 0 25 50 75 100 125 5 10 15 20 25 30 35
JUNCTION TEMPERATURE (°C) INPUT VOLTAGE (V)
1 3
KA78XXE
Input Output
CI 2 CO 0.1 μF
0.33 μF
Figure 6. DC Parameters
1 3
KA78XXE
Input Output
2 RL 270 pF
VO
2N6121 OV
0.33 μF VO
OR EQ 30 μS
100 Ω
5.1 Ω 1 3
KA78XXE
Input Output
2 RL
0.33 μF
470 μF
120 Hz +
1 3
KA78XXE
Input Output
CI 2 CO 0.1μF
0.33μF
1 3
KA78XXE Output
Input
CI 2 CO 0.1 μF Vxx
0.33 μF R1
IQ
IO
RL
Vxx
IO = +
R1 IQ
1 3 Output
KA78XXE
Input
CO Vxx
CI 2 0.1 μF R1
0.33 μF
IQ
R2
I RI ≥ 5IQ
VO = VXX(1+R2/R1) + IQR2
Figure 11. Circuit for Increasing Output Voltage
Input 1 Output
3
KA7805E
CI 0.33μF - 2 CO
6 0.1μF
KA741
+ 3 10KΩ
4
IRI ≥ 5 IQ
VO = VXX(1+R2/R1) + IQR2
Figure 12. Adjustable Output Regulator (7 V to 30 V)
Input
VI
IQ1
R1 1 3 Output
KA78XXE
3Ω Io Vo
IREG
2
0.33 μF 0.1 μF
Input Q1
VI
Q2
R1 1 3 Vo
KA78XXE
3Ω Output
2
0.33 μF 0.1 μF
Q1 = TIP42
Q2 = TIP42
VBEQ2
RSC =
ISC
1 3
KA78XXE
VI VO
2
0.33 μF 0.1 μF 4.7 kΩ
7 COMMON
_ 2
COMMON
6
KA741
+ 3
4 4.7 kΩ
1 3
KA7815E
+20 V +15 V
2
0.1 μF
0.33 μ F 1N4001
+ 2.2 μF 1 μF +
1 1N4001
KA7915E
-20 V 2 3 -15 V
Output
Input
+
0.1 μF
2
1
KA78XXE
470 Ω
4.7 Ω
Z1 3
1
KA78XXE
+ 0.33 μF 2
10 μF
+
0.5 Ω
2000 μF
)
$ 0,1
)
0,1
)
&
0,1
0$;
0,1
/$1'3$77(515(&200(1'$7,21
)
%
)
)
0,1
6(('(7$,/$
)
%
*$*(3/$1( )
)
127(681/(6627+(5:,6(63(&,),('
$127&203/,$1772-('(&729$5,$7,21$%
%$//',0(16,21$5(,10,//,0(7(5 0$;
&',0(16,216$5((;&/86,9(2)%855602/')/$6+ '(7$,/$ 0,1
$1'7,(%$5(;7586,216 6($7,1*3/$1( 6&$/( )
'/$'3$77(513(5,3&$$7$1'$5'
723;1
('5$:,1*),/(1$0(0.772'5(9
)'2(6127&203/<-('(&67$1'$5'9$/8(
*)$,5&+,/'6(0,&21'8&725
Figure 20. 3-LEAD, TO-252, NOT COMPLIANT TO JEDEC TO-252 VAR. AB, SURFACE MOUNT (DPAK)
Authorized Distributor
ON Semiconductor:
KA7812E KA7808AE KA7815AE KA7809ETSTU KA7809AE KA7818ETSTU KA7812ETSTU KA7808ETSTU
KA7808AETU KA7812AE KA7815E KA7815ETSTU KA7824E KA7805AE KA7818E KA7824ETSTU
KA7805AETSTU KA7805ETSTU KA7806E KA7806ETSTU KA7812TSTU KA7810TU KA7812_Q KA7810
KA7809A KA7818 KA7805A KA7805ATU_Q KA7824TU KA7806 KA7818ATU KA7809TU KA7808TSTU
KA7812TU KA7815 KA7809 KA7812ATU KA7805TU_Q KA7805TU KA7812 KA7812A KA7806ATU KA7806A
KA7809TU_Q KA7815_Q KA7815ATU KA7806TSTU KA7815TU KA7808 KA7805ATU KA7815TSTU KA7815A
KA7808TU KA7805 KA7806TU KA7824