Académique Documents
Professionnel Documents
Culture Documents
and Transmission
Bearing
Retainer
Lube Tube
Bearing
Oil Isolator Bearing
Seal Retainer Lube Tube O-Ring
Cap Screw 2 Places
Bearing 6 Places
Shield
Bearing
Retainer
Retainer Yearly
O-Ring Retainer O-Ring
Yearly
Bearing Isolator
Yearly
Oil Seal
6 Lube Tube
Shims
Mainshaft
Inspecting the mainshaft
Wear allowances
Component Replace when
Stem
5 Years
Split Load Collar
Yearly
Radial Grooves
Inspect for groove
wear and pitting Radial Grooves
0.650 Inspect for groove
Yearly wear and pitting
max
Yearly
0.620
min
Retainer Ring
Mainshaft
Inspecting mainshaft end play
Dial
Indicator
Shims
Bearing
Retainer
Procedure
6 Check mainshaft endplay with every washpipe
changeout
Remove the washpipe assembly
Check the mainshaft axial movement by
applying an upward force to the mainshaft and
measuring the amount of axial movement with a
dial indicator
If axial shaft movement is not .001 in. to .002 in.,
remove the bearing retainer and adjust the
number of shims under the bearing retainer as
required to allow .001 in. to .002 in. of axial