Académique Documents
Professionnel Documents
Culture Documents
Boomer M2 C Sp
Equipped with COP 1638, COP 1838ME or COP 2238 rock drills
Coverage area up to 65 m2
www.atlascopco.com
M2
M2
Standard features
»»Rock drill »»Control system
• COP 1638, COP 1838ME or COP 2238 rock drill with • Advanced Rig Control System (RCS) allowing several levels
dual-damping system for optimal consumable life of automation to suit customer requirements
• Pressurized housing and mating surfaces to reduce internal • Standard functions include soft collaring and the anti-jam-
contamination of the rock drill ming function Rotation Pressure Controlled Feed (RPCF)
• Integrated diagnostic and event logging system to assist in
»»Hydraulic boom equipment maintenance
• Interactive operator panel with full-colour display
• BUT 35 SL heavy-duty boom with double tripod suspension
for accurate hydraulic parallel holding in all directions
»»Carrier
»»Hydraulic feed • Sturdy, articulated carrier with four-wheel drive
• Powered by a 4-cylinder, EPA III/COM III (Tier 3/Stage IIIA)
• BMH 6000-series heavy-duty aluminium feed with high approved diesel engine
bending and torsional resistance for maximum durability • Four jacks for stable set up
• Snap-on stainless steel sleeves and polymer contacts
»»General
• FOPS-approved telescopic protective roof
• Cable reel
• Hydraulically driven compressor
• Hydraulically driven water booster pump
• Working lights
Boomer M2 C Sp
Specifications
ROCK DRILL »»Electrical system
COP 1638 COP 1838ME COP 2238
• Total installed power....................................................158 kW
• Main motors.............................................................2 x 75 kW
Shank adapter R32/R38/T38 R32/R38/T38 R32/R38/T38
• Voltage.................................................................380–1 000 V
Height over drill centre 88 mm 88 mm 88 mm
• Frequency. ................................................................50–60 Hz
Length without shank 1 008 mm 1 008 mm 1 008 mm • Starting method........................star/delta (1 000 V direct start)
Impact power 16 kW 18 kW 22 kW • Electronic overload protection for electric motors
Impact rate 60 Hz 60 Hz 73 Hz • Percussion hour meter on operator display
Hydraulic pressure 200 bar 230 bar 250 bar • Digital voltmeter/amperage meter in electric cabinet
Rotation system Separate rotation Separate rotation Separate rotation • Phase sequence indicator
Rotation speed 0–340 rpm 0–340 rpm 0–340 rpm
• Earth fault indicator
• Battery charger
Rotation torque, max 640 Nm 640 Nm 640 Nm
• Transformer. ...................................................................8 kVA
Lub. air consump. at 2 bar 6 l/s 6 l/s 6 l/s • Cable reel, diameter................................................ 1 600 mm
Water consumption 1.1 l/s 1.1 l/s 1.1 l/s • Dual controls for cable reel
Weight 170 kg 170 kg 170 kg
Sound level <106 dB(A) <106 dB(A) <106 dB(A)
»»Hydraulic system
• Hydraulic pumps...............2 separate units, one for each boom
FEED
• Pumps unloaded at start
BMH 6800 BMH 6812 BMH 6814 BMH 6816 BMH 6818
• System pressure, max. ...................................................250 bar
• Hydraulic oil tank, volume max/min......................... 250/200 l
Total length 5 287 mm 5 582 mm 6 502 mm 7 102 mm • Low oil level indicator
Drill steel length 3 700 mm 4 310 mm 4 920 mm 5 530 mm • Oil temperature gauge on oil tank
Hole depth 3 443 mm 4 043 mm 4 668 mm 5 268 mm • Electrical oil filling pump
Weight, incl. drill 601 kg 631 kg 665 kg 696 kg • Oil filter indicator
Feed force 20.0 kN 20.0 kN 20.0 kN 20.0 kN • Water cooled oil
• Filtration. ........................................................................ 16 µm
• Mineral hydraulic oil
»»Boom • Big hole drilling system
• BUT 35 SL
• Feed extension......................................................... 1 800 mm »»Carrier
• Boom extension....................................................... 1 600 mm
• Parallel holding..........................................................complete • Deutz 4-cylinder, TCD 2013 L04, EPA III/COM III (Tier 3/
• Feed roll-over.................................................................... 360° Stage IIIA) approved 4-stroke prechamber diesel engine
• Max. lifting angle..................................................... +65°/–30° • Power rating at 2 300 rpm. ........................... 120 kW (160 hp)
• Max. swinging angle.........................................................±45° • Torque at 1 600 rpm.....................................................618 Nm
• Weight, boom only......................................................2 900 kg • Articulated steering................................... ±41° steering angle
• Fixed seat for tramming
• Four-wheel drive
»»Air system • Hydrostatic power steering system
• Hydrodynamic transmission.................................Clark 24000
• Hydraulically driven screw compressor. .. Atlas Copco GAR 5 • Front axle............................................................. Dana 123/90
• Capacity, max at 9 bar. .....................................................26 l/s • Rear axle ....................................Dana 123/90, ±8° oscillation
• Adjustable speed • Automatic differential lock on front axle, limited slip
• Air pressure gauge • Tyres. ....................................................................12.00 x R24
• Hole blowing kit with 80 l air receiver • Clearance outside axles................................22° front, 13º rear
• Hydraulic jacks, front . ........................................ 2 extendable
• Hydraulic jacks, rear...............................................................2
»»Water system • Service brakes..............................................2 separate circuits
• Hydraulically driven water booster pump. ....Flygt PXR1607H • Emergency and parking brakes......................................SAHR
• Fuel tank, volume. ........................................................... 100 l
• Water booster pump max capacity at 15 bar.............. 250 l/min
• Exhaust catalyser
• Min water inlet pressure at 200 l/min, ..............................2 bar • Silencer
• Water pressure gauge • Electric system..................................................................24 V
• Water flow guard • Batteries.........................................................2 x 12 V, 125 Ah
• Tramming lights......................................................... 8 x 70 W
• Working lights, halogen.............................2 x 1 000 W, 230 V
• Brake lights
• Illuminated stairs for platform................................... 2 x 70 W
• Fire extinguisher
• Central lubrication system
• Spirit level....................one for longitudinal, one for sideways
• Gradeability at max. load on drive wheels. ........................ 1:4
• Horn, beacon and reverse alarm
• Shelf for drill bits and tools
Boomer M2 C Sp
Specifications
DRIFTER RODS Shank adapters
Dimension Min. hole diameter Thread Diameter Length
Optional equipment
»»Rock drill/Drilling system • Joystick-controlled spotlights left and/or right
• Water mist flushing, external water and air supply • Swingable seat for drilling and tramming
• External air supply connection for hole blowing kit • Two operator panels (for standing operation only)
Measurements
side view
3044
www.atlascopco.com
© Copyright 2008, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
2303
M2
1953
M2
Coverage area
1600
7200 7500
2040
200
9700
10100
WEIGHT
gross weight, depending on configuration
11/2008