Vous êtes sur la page 1sur 3

SAE Ferrous Materials

Standards Manual 2004 Edition


Table of Contents:

1. Introduction
2. SAE Ferrous Materials Technical
Reports SAE J1397 MAY1992–Estimated
2.1 Numbering System Mechanical Properties and
SAE J402 MAY1997–SAE Numbering Machinability of Steel Bars
System for Wrought or Rolled Steel * SAE J1442 SEP2003–High-Strength,
SAE J1086 JUL1995 and ASTM Hot-Rolled Steel Bars
E527–Numbering Metals and Alloys SAE J2281 MAY1997–Selecting and
2.2 Carbon and Alloy Steels Specifying Hot-Rolled Steel Bar
* ASTM A514/A514M-00a–Standard Products
Specification for High-Yield- 2.3 Carbon and Alloy Steel Hardenability
Strength, Quenched and Tempered SAE J406 MAY1998–Methods of
Alloy Steel Plate, Suitable for Welding Determining Hardenability of Steels
* SAE J401 APR2000–Selection and SAE J1268 MAY1995–Hardenability
Use of Steels Bands for Carbon and Alloy H Steels
* SAE J403 NOV2001–Chemical SAE J1868 SEP1993–Restricted
Compositions of SAE Carbon Steels Hardenability Bands for Selected
* SAE J404 JUN2000–Chemical Alloy Steels
Compositions of SAE Alloy Steels SAE J1975 NOV1997–Case
SAE J409 FEB1995–Product Hardenability of Carburized Steels
Analysis-Permissible Variations from 2.4 Sheet and Strip Steel
Specified Chemical Analysis of a SAE J126 JUN1986–Selecting and
Heat or Cast of Steel Specifying Hot and Cold Rolled
SAE J411 SEP1997–Carbon and Alloy Steel Sheet and Strip
Steels SAE J810 MAR1996–Classification of
SAE J412 OCT1995–General Common Surface Imperfections
Characteristics and Heat Treatments in Sheet Steel
of Steels SAE J863 JUN1986–Methods for
* SAE J413 FEB2002–Mechanical Determining Plastic Deformation in
Properties of Heat Treated Wrought Sheet Metal Stampings
Steels SAE J911 MAR1998–Surface
SAE J415 JUL1995–Definition of Heat Roughness and Peak Count
Treating Terms Measurement of Cold-Rolled Steel
* SAE J450 FEB2002–Use of Terms Sheet
Yield Strength and Yield Point SAE J940 OCT1994–Glossary of
* SAE J935 FEB2002–High-Strength Carbon Steel Sheet and Strip Terms
Carbon and Alloy Die Drawn Steels SAE J1058 DEC1999–Standard Sheet
* SAE J1081 NOV2000–Potential Steel Thickness and Tolerances
Standard Steels SAE J1562 DEC1999–Selection of
* SAE J1249 JUN2000–Former SAE Zinc and Zinc-Alloy (Hot-Dipped and
Standard and Former SAE EX-Steels Electrodeposited) Coated Steel Sheet

+ indicates New Report; * indicates Technical Revision


SAE Ferrous Materials
Standards Manual 2004 Edition

* SAE J1392 FEB2001–Steel, High ASTM A230/A 230M-99–Standard


Strength, Hot Rolled Sheet and Strip, Specification for Steel Wire, Oil-
Cold Rolled Sheet, and Coated Tempered Carbon Valve Spring
Sheet Quality
SAE J2329 MAY1997–Categorization ASTM A232/A 232M-99–Standard
and Properties of Low-Carbon Specification for Chromium-
Automotive Sheet Steels Vanadium Alloy Steel Valve Spring
SAE J2340 OCT1999–Categorization Quality Wire
and Properties of Dent Resistant, * ASTM A313/A 313M-03–Standard
High Strength, and Ultra High Specification for Stainless
Strength Automotive Sheet Steel Steel Spring Wire
+ SAE J2375 AUG1997–The Selection * ASTM A401/A 401M-03–Standard
of Adhesives for the Attachment of Specification for Steel Wire,
Exterior Aftermarket Accessories Chromium-Silicon Alloy
2.5 Corrosion Resistant Steels * ASTM A679/A 679M-00–Standard
SAE J405 JUN1998–Chemical Specification for Steel Wire,
Compositions of SAE Wrought High Tensile Strength, Cold Drawn
Stainless Steels 2.9 Ferrous Powdered Metals
2.6 Automotive Iron and Steel Castings SAE J471d AUG1973–Sintered
* SAE J431 DEC2000–Automotive Gray Powdered Metal Parts: Ferrous
Iron Castings 2.10 Elevated Temperature Properties of
* SAE J434 FEB2004–Automotive Ferrous Materials
Ductile (Nodular) Iron Castings SAE J125 MAY1988–Elevated
* SAE J435 OCT2002–Automotive Steel Temperature Properties of Cast Irons
Castings SAE J775 AUG1993–Engine Poppet
2.7 Tool Materials Valve Information Report
SAE J437a APR1970–Selection and SAE J1682 SEP1993–Valve Guide
Heat Treatment of Tool and Die Steels Information Report
SAE J438b MAY1970–Tool and Die SAE J1692 AUG1993–Valve Seat
Steels Insert Information Report
SAE J439a FEB1977–Sintered Carbide SAE J2515 AUG1999–High
Tools Temperature Materials for Exhaust
SAE J1072 FEB1977–Sintered Tool Manifolds
Materials 2.11 Abrasive Wear of Ferrous Metals
2.8 Spring Wire SAE J965 AUG1966–Abrasive Wear
ASTM A227/A 227M-99–Standard 2.12 Test Procedures
Specification for Steel Wire, Cold- * ASTM A751-01–Standard Test
Drawn for Mechanical Springs Methods, Practices, and Terminology
* ASTM A228/A 228M-02–Standard for Chemical Analysis of Steel Products
Specification for Steel Wire, Music * ASTM E8-03–Standard Test Methods
Spring Quality for Tension Testing of Metallic Materials
ASTM A229/A 229M-99–Standard * ASTM E45-97 (Reapproved 2002)–
Specification for Steel Wire, Oil- Standard Test Methods for Determining
Tempered for Mechanical Springs the Inclusion Content of Steel

+ indicates New Report; * indicates Technical Revision


SAE Ferrous Materials
Standards Manual 2004 Edition

ASTM E112-96–Standard Test SAE J427 MAR1991–Penetrating


Methods for Determining Average Radiation Inspection
Grain Size SAE J428 MAR1991–Ultrasonic
* ASTM E140-02–Standard Hardness Inspection
Conversion Tables for Metals SAE J864 MAY1993–Surface
* ASTM E1077-01–Standard Test Hardness Testing with Files
Methods for Estimating the Depth SAE J1242 MAR1991–Acoustic
of Decarburization of Steel Emission Test Methods
Specimens SAE J1267 DEC1988–Leakage Testing
* ASTM E1806-96 (Reapproved 2001)– 2.13 Rollover and Falling Object
Standard Practice for Sampling Protective Structures
Steel and Iron for Determination of * SAE J1119 SEP2002–Steel Products
Chemical Composition for Rollover Protective Structures
SAE J349 FEB1991–Detection of (ROPS) and Falling Object Protective
Surface Imperfections in Ferrous Structures (FOPS)
Rods, Bars, Tubes, and Wires 3. Key Word Index
SAE J358 FEB1991–Nondestructive 4. Examples of Related SAE Technical
Tests Papers
SAE J359 FEB1991–lnfrared Testing
SAE J417 DEC1983–Hardness Tests
and Hardness Number Conversions Find the technical resources that you need at
[See also ASTM E140-02£1] sae.org/standards
SAE J419 DEC1983–Methods of
Measuring Decarburization
[See also ASTM E1077-01]
SAE J420 MAR1991–Magnetic
Particle Inspection
SAE J422 DEC1983–Microscopic
Determination of Inclusions in Steels
[See also ASTM E45-97
(Reapproved 2002)]
SAE J423 FEB1998–Methods of
Measuring Case Depth
SAE J425 MAR1991–Electromagnetic
Testing by Eddy Current Methods
SAE J426 MAR1991–Liquid Penetrant
Test Methods

+ indicates New Report; * indicates Technical Revision

Vous aimerez peut-être aussi