Terminal Methode : Collection Volume Methode Non-radioactive technology No external power required No moving parts Selection of tip radii and variable impedance to adjust for optimum performance at different installation heights Dynamic response to the approach of a lightning downleader Minimal pre-strike corona/space charge Streamers released only when the ambient field can sustain leader initiation and propagation
Power Line Filter In-line series protection
20kA 8/20 surge rating – robust surge protection rating Three modes of protection – L-N, L-PE & N-PE LED life status indication Mounting flange – can be wall mounted Nominal voltage Un : 230V 2 power outlet Distribution system : 1 phase; 2 W + Ground Max cont. operating voltage Uc : 275V Freq : 50/60 Hz Max Discharge current Imax : 20kA 8/20 µs Max Line current : 10 A Operating current: 840 mA Leakage current < 0.2 mA Aggregate surge rating: 80 kA 8/20 µs Maximum discharge current Imax: 20 kA 8/20 µs for L-N, L-PE, and N-PE Protection level Up @ 500A : 50 V Protection mode: all mode protected (L-N; L-PE; N-PE) Status : LED Indicator Enclosure : Aluminium Mounting : Portable (can be wall mounted) Approval : Have an authority approved institution Surge rated meet: IEC 61643-1, ANSI IEEEC62.41-1991 Cat A, Cat B, Cat C
LAN Protector Plug-in protection – simple to install
100BaseT (Cat 5) – works with high speed networks Earth Potential Equalization Max. Cont. Operating Voltage Uc: 66Vdc Nominal discharge current 500A 8/20 µs Frek: 100Mbits (100Base T & 10 Base T) Voltage protection level Up @ In 35VL-L, 350L-G Connection: RJ45 with 250 mm path cord Surge rated to meet: IEC 61643-21; ANSI/IEEE C62.41.2 Cat A
Coaxial Surge Spark overvoltage
Protector 100V/s : 72-108V 100V/us : 450V Max discharge current Imax : 20kA 8/20 µs AC discharge current : 100A 50/60 Hz 9 cycles Impulse life: 400 impulses @500A 10/1000µs Frequency : DC to 3GHz typical Capacitance : <1.5pF Impedance : 50 W Enclosure : IP20 (NEMA-1) Connection : N-Type, male/female Approval : CE Triggered Spark Gap Triggering air gap technology provides low let-through voltage – offers superior protection compared to traditional spark gaps Effective equipotential bonding – provides N-PE equalization protection bond on TT power distribution systems Meets IECSM 61643-1 test class I, II Can be used L-PE, or L-N due to follow current control Nominal voltage Un : 240V Max cont oprating voltage Uc : 440V