Académique Documents
Professionnel Documents
Culture Documents
1 New project
Let’s launch IDEA StatiCa and select application Connection. We create a new project by selecting a starting template
closest to the desired design, filling the name and choose design code and default material properties – S 235.
2 Geometry
One beam and base plate with anchors were automatically added.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 1/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
Member COL
Next we modify properties of member COL.
Member M2
We add a new member M2.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 2/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 3/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
Member M3
We add a new member M3 and change its properties as we wish.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 4/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
3 Load effects
One load effect was automatically added. We input the values of internal forces into the chart. More load cases can be
added.
4 Design
Manufacturing operation Base plate was added by the wizard. We just need to update some of its properties.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 5/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
We can go on and add next Manufacturing operation. Now, we select the End Plate.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 6/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 7/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
Let´s cut the gusset plate corner of connecting plate CPL1. For this operation, we need to go into Editor, Gusset and add a
Chamfer with 70 mm size at corner number 2.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 8/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Conn… 9/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
5 Check
We start the analysis based on CBFEM by clicking Calculate in the ribbon. Analysis model is automatically generated,
calculation is performed and we can see the Overall check displayed together with basic values of check results.
We go to the display tab Check and there we activate Stress in concrete and Mesh from the ribbon to get a full picture of
what is happening in the joint. We open the tab Concrete block to see the results for this item.
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Con… 10/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
6 Report
At last we go to the tab Report. IDEA StatiCa offers fully customizable report to print out or save in editable format.
Keywords:
connection, joint, Eurocode, bolt, end plate, fin plate, welds, anchors, code-check, stress, bolt forces, base plate, cap plate,
footing, diagonal, anchoring, CBFEM
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Con… 11/12
4/28/2020 Footing with diagonal (EN) | IDEA StatiCa
https://resources.ideastatica.com/Content/02_Steel/Tutorials/EN/EC_Footing_with_diagonal/Tutorial_Footing_with_diagonal.htm?tocpath=Con… 12/12