Académique Documents
Professionnel Documents
Culture Documents
APPLICATION IN THE
OIL&GAS FIELD
ALESSIO PIERRO
Techfem SpA
techfem.it
four case studies relative
to Oil & Gas field.
In the results are
highlighted some
potentiality of Code_Aster
for industrial application
and an initial validation of
«tuyau» element in
comparison with
commercial stress analysis
software.
Input Data:
Design Pressure:
75 barg;
Ambient Temperature:
15 °C,
Operating Temperature:
65 °C;
Concentrated Force in the
middle:
-1 kN vertical;
Pipe OD: 10in, Pipe WT:
15.9 mm.
Case Study 1
Case Study 2
Beam Structural
Simulation
Beam Structural
Simulation
Input Data:
Beam Section:
square 60x60x3 mm;
Hoses Total Load:
15 kN;
Material:
Steel S235;
Maximum Allowable
Deflection:
15 mm.
Case Study 2
Case Study 3
3D Handler
for Structure Lifting
Validation through
Abaqus results shown the
potentiality of Code_Aster.
Case Study 3
3D Handler
for Structure Lifting
Input Data:
Structure Weight
(including DAF):
278 kN;
Handler Dimensions:
OD 4in x 11.13 mm.
Case Study 3
Case Study 4
Sealine on
Seabed Outcrop
Sealine on
Seabed Outcrop
Deformed Shape:
Conclusions and
future steps
www.techfem.it
info@techfem.it