Académique Documents
Professionnel Documents
Culture Documents
C
DELIVERING EXCELLENCE
INTRODUCTION
• The VMC Panels is a vertical formwork system created to frame columns and wall, it is
primarily directed toward residential building. This system is consist of a range from
hand-held panels in all existing dimensions and it is very suitable where crane is not
available.
• The flexibility of column cross section (5 cm grids) makes it easy to be adjusted with-
out re-assembly.
• Different horizontal and vertical dimensions can be produced upon the request of the
client
ADVANTAGES DIMENSIONS
• Using the complete system without crane • Height range 3m , 1m & 0.5m
• Fair-faced concrete surface • Width range 0.4m , 0.6m and 0.8 m
• Easy and fast assembly
• Panels lightness.
MAIN COMPONENTS
1) V.M.C. Panel 7) Tie Bolt
2) Push Pull Prop or Tilt Up Shore 8) Tie Rod
3) Head Plate 9) Bracket
4) Base Plate 10) Handrail
5) Clip 11) Lifting Eye
6) Tube 1.5”
10
9
11
1
5
6
7
8
2
4
3
-Introduction
2
-Advantages:
Advantages:
using the complete system without crane
Easy assembly
Panels lightness.
3
VMC Panels:
•Height range 3m , 1m & 0.5m
•Width range 0.4m , 0.6m and 0.8 m
Description Weight (kg)
4
column dimension 40 X 40 CM
column dimension 60 X 60 CM
column dimension 80 X 80 CM
-Accessories:
Captive column Tie Bolts and wing Bolts are used to connect panels together.
nuts are permanently attached to
each element
5
Push Pull Prop Head is used to
connect between the panels and the push Lifting Hooks act as load bearing
pull using Rivet Pin and Spring Clip large points for moving and ensures
easy
Bolts are used to connect panel with Push and simple extensions
Pull Prop Head
6
Pipe Ø Tie Rod
48.3mm
VMC
Tie Rod Panel
VMC
Panel