Vous êtes sur la page 1sur 2

SmartClass+ Installation

Prerequisites
These minimum requirements apply to the SmartClass+ language lab system when equipped with a software-based
Intercom module (for audio) and a software-based KVM module (for screen sharing). For systems using either a
hardware-based Intercom module or a hardware-based KVM module, the requirements are much less demanding. For
systems that do not include a Content Management module, the requirements are also much less demanding.

Overview
The block diagram of a typical SmartClass + installation is shown below:

Teacher Computer Student Computers

SmartClass+ Server

1000 Mbps

Network Switch 100 Mbps


LAN

Computer Minimum Requirements


Student Stations Teacher Station Server
Processor Intel Pentium IV 2.5 GHz Intel multicore CPU 2.5 GHz 1.2GHz (NAS)
or AMD Athlon 2.5 GHz or AMD multicore CPU 2.5 GHz 3.5 GHz (Windows)
RAM Memory 1 GB 4 GB 512 MB (NAS) 4 GB (Windows)
Hard Drive 120 GB 120 GB 500 GB (RAID preferred)
CD/DVD Drive -  
Network Interface Card (NIC) 100 Mb/s (wired) with ≤ 30 stations 100 Mb/s (wired)
1000 Mb/s (wired)
Wake-on-LAN > 30 stations 1000 Mb/s (wired)
Sound Card Stereo Mix or What-U-Hear Stereo Mix or What-U-Hear -
Operating System Windows XP, VISTA, or 7 (32 Windows XP, VISTA, or 7 (32 or NAS, Linux, or Windows Server
or 64 bit) 64 bit) (2003, 2008, or newer)
Adobe Flash Version 10.1.102.64 Version 10.1.102.64 -
Video Screen #1 1024 x 768 XGA 1024 x 768 XGA* -
Video Screen #2 - 1280 x 768 (or higher) -
Keyboards & Mice   
SmartClass + Installation
Prerequisites
Sound Cards
• All sound cards must be identical
• All sound cards must use the same drivers
• Make sure that the latest sound card drivers from the manufacturer have been installed
• Sound cards must support What-U-Hear (Sound Blaster) or Stereo Mix (other manufacturers)
• If the built-in sound cards do not support What-U-Hear/Stereo Mix, you must install external USB sound cards
having this support. We recommend Sound Blaster X-Fi Go! Pro

Dual-Monitor Support for Teacher Station


• Primary monitor (teacher monitor) must support a minimum resolution of 1024 x 768. This resolution should
match those of the student stations. (Note that to run the Media Activities Dashboard (MAD) for the teacher on
the primary monitor, a minimum resolution of 1280 x 768, (or 1280 x 800 if you want to view the Windows
taskbar) is required. )
• Secondary monitor (control monitor) must support a minimum resolution of 1280 x 768. The vertical resolution
must be at least as great as the primary monitor.
• When running dual monitors on the same computer, make sure that in the Windows screen configuration the
icons for the two monitors are top-aligned, as SC+ relies on this for proper positioning of on-screen graphics.
• Make sure that the Windows text/icon size is set to 100% (and no larger) as larger sizes interfere with all Flash
based programs – including SC+.

Network Switch
• The network should use a single (or stacked) TCP/IP switch located in the classroom (or near the classroom in
wiring closet) with connections for all student stations, the teacher station, and the SC+ server.
• Student ports should be 100 Mbps
• Teacher port should be 1000 Mbps (or if 30 stations or less, can be 100 Mbps)
• The SC+ Server port should be 1000 Mbps

General Requirements
• All stations must be part of the same Workgroup or Domain
• On all stations, local firewalls should be disabled or opened up to the SmartClass + (and related) applications
(network ports 33369, 33370, 33378, and 33379).
• Anti-virus software that conflicts with the operation of SmartClass + must be disabled

Video Support & Acceleration


• All stations must be running the latest version of Adobe Flash (version 10.1.102.64 or newer) that has been
downloaded using Internet Explorer
• DirectDraw must be enabled on all stations
• The Windows Media Player “overlay” capability must be disabled

3185 rue Delaunay Toll Free (North America): (800) 680-1448


Laval (Québec) Telephone: +1 (450) 680-1448
www.robotel.com CANADA H7L 5A4 Facsimile : +1 (450) 680-1928
Email: sales@robotel.com
2012-01-20  Printed in Canada  SmartClass and Robotel are registered trademarks of Robotel Inc.

Vous aimerez peut-être aussi