0 évaluation0% ont trouvé ce document utile (0 vote)
16 vues1 page
This incident report summarizes a workplace injury that occurred when unloading stainless steel sheets from a truck. A mechanical supervisor and colleague were manually lowering a large stainless steel sheet when the supervisor's left hand slipped, causing a corner of the sheet to cut his left wrist and requiring sutures. The investigation found that lifting equipment was available but not used, and the supervisor was not wearing protective gloves that may have prevented the injury. Corrective actions included strictly requiring lifting equipment for heavy loads, reviewing personal protective equipment needs like arm-length gloves, and requiring more personnel to handle large sheets.
This incident report summarizes a workplace injury that occurred when unloading stainless steel sheets from a truck. A mechanical supervisor and colleague were manually lowering a large stainless steel sheet when the supervisor's left hand slipped, causing a corner of the sheet to cut his left wrist and requiring sutures. The investigation found that lifting equipment was available but not used, and the supervisor was not wearing protective gloves that may have prevented the injury. Corrective actions included strictly requiring lifting equipment for heavy loads, reviewing personal protective equipment needs like arm-length gloves, and requiring more personnel to handle large sheets.
This incident report summarizes a workplace injury that occurred when unloading stainless steel sheets from a truck. A mechanical supervisor and colleague were manually lowering a large stainless steel sheet when the supervisor's left hand slipped, causing a corner of the sheet to cut his left wrist and requiring sutures. The investigation found that lifting equipment was available but not used, and the supervisor was not wearing protective gloves that may have prevented the injury. Corrective actions included strictly requiring lifting equipment for heavy loads, reviewing personal protective equipment needs like arm-length gloves, and requiring more personnel to handle large sheets.
PROJECT MANAGEMENT INCIDENT PREVENTION BULLETIN SUMMARY OF INCIDENT A Mechanical Supervisor (IP) together with a colleague working at ground level were tasked to unload stainless steel sheets from a truck trailer bed and to place them on the floor IP & colleague lowering the stainless steel sheet. nearby. The sheets dimensions were, 1.2 m x 2.0 m x 2.5 mm. The IP and his colleague pulled the sheets to the edge of trailer bed prior to unloading, then upon unloading they tilted the stainless steel sheet to the left side of the IP to lower it down Left hand of IP slipped resulting in corner of the sheet cutting his left wrist. to the floor. In the process of lowering down the sheet, the left hand of the IP slipped on the stainless steel sheet causing a corner edge of the stainless sheet to cut his left wrist, resulting in an injury requiring sutures. The IP’s wound was sutured and dressed.
FINDINGS CORRECTIVE ACTIONS
• The stainless steel sheet o To strictly implement the use of available lifting was unloaded manually aid (mobile crane or forklift) for loading and instead of using the available unloading heavy or bulky materials at site. mobile equipment in the area (Sheets had been loaded onto the trailer as a “bundle” using a crane). • The IP did not anticipate that o At some point manual handling of the sheets the stainless steel sheet would be required (even if not for unloading). would slip in his hand This incident points to a need to review PPE injuring his left wrist with the (Type of gloves) and to provide longer gauntlet corner edge of the sheet. type gloves to protect the wrist and forearm areas. o Given the size of the sheets 4 persons rather than the 2 on this occasion shall be required when handling the sheets. o Discuss this incident in TBT. Saudi Aramco: Company General Use