Académique Documents
Professionnel Documents
Culture Documents
Overvoltage Transient
Suppressor
...designed for applications requiring a diode with reverse avalanche
characteristics for use as reverse power transient suppressor.
Developed to suppress transients in the automotive system, this
device operates in reverse mode as power zener diode and will protect http://onsemi.com
expensive modules such as ignition, injection and autoblocking
systems from overvoltage conditions.
• High Power Capability
• Economical Cathode
Mechanical Characteristics
• Finish: All External Surfaces are Corrosion Resistant
• Polarity: Cathode to Terminal TOP CAN
CASE 460
• Weight: 1.78 Grams (Approximately)
• Maximum Temperature for Soldering Purposes:
260°C for 10 s using a Belt Furnace MARKING DIAGRAM
• Marking: MR2835S
##
MAXIMUM RATINGS MR2835S
YYWW
Rating Symbol Value Unit
DC Blocking Voltage VR 23 Volts
Peak Repetitive Reverse Surge Current IRSM 62 Amps
(Time Constant = 10 ms, TC = 25°C) ## = Lot Number
MR2835S = Specific Device Code
Non–Repetitive Peak Surge Current IFSM 400 Amps YY = Year
(Halfwave, Single Phase, 50 Hz) WW = Work Week
Storage Temperature Range Tstg –40 to °C
+150
Operating Junction Temperature Range TJ –40 to °C
ORDERING INFORMATION
+150
Device Package Shipping
THERMAL CHARACTERISTICS
Characteristic Symbol Value Unit
Thermal Resistance, Junction to Case RθJC 1.0 °C/W
1. Pulse Test: Pulse Width < 300 µs, Duty Cycle < 2%.
*Typical
di/dt LIMITATION
0 - 150 V 50 mF MR2835S
MECHANICAL STRESS
COMPRESSION TORSION
TENSION SHEAR
http://onsemi.com
2
MR2835S
100 1000
t (37%) = TIME CONSTANT
t (50%) = 0.7 t (37%)
60
100
%
40
0 10
0 0.1 0.2 0.3 0.4 0.5 1.0 10 100 1000
Time (second) TIME CONSTANT (mS)
Figure 2. Load Dump Pulse Current Figure 3. Maximum Peak Reverse Current
1000 100
TC = 25°C
W RSM , PEAK REVERSE ENERGIE (J)
IR , REVERSE CURRENT ( A) 10
TJ = 150°C
100
1.0
TJ = 100°C
0.1
10
0.01 TJ = 25°C
1.0 0.001
1.0 10 100 1000 0 10 20 30
TIME CONSTANT (mS) VR, REVERSE VOLTAGE (V)
1000 10,000
I F , INSTANTANEOUS FORWARD CURRENT (A)
TC = 25°C
PRSM , PEAK REVERSE POWER (W)
100 TJ = 150°C
TJ = 100°C 1000
10 TJ = 25°C
1.0 100
500 600 700 800 900 1000 1100 1.0 10 100 1000
VF, INSTANTANEOUS FORWARD VOLTAGE (mV) TIME CONSTANT (mS)
http://onsemi.com
3
MR2835S
2800 10
2600
2400
2200
PEAK REVERSE POWER (W)
2000
1800 TIME CONSTANT = 10 ms
C T (nF)
1600 TJ = 25°C
1400
1200
1000
800 TIME CONSTANT = 100 ms
600
400
200 1.0
25 50 75 100 125 150 0.1 1.0 10 100
CASE TEMPERATURE (°C) VR (V)
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ LOKREEL
CARDBOARD CARRIER
ÎÎÎÎÎÎÎÎÎ W1
ÎÎÎÎÎÎÎÎÎ
TAPE
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
N
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
COVER
TAPE
W3
A W2
BAR CODE
LABEL
DIM mm
T 24
##
MR2835S
##
MR2835S
##
MR2835S
T A 330
YYWW YYWW YYWW N 100
W1 24.4
W2 28.5
W3 25
16 DIMENSIONS: millimeter BAR CODE
LABEL
http://onsemi.com
4
MR2835S
PACKAGE DIMENSIONS
TOP CAN
CASE 460–02
ISSUE A
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
B D 2. CONTROLLING DIMENSION: MILLIMETER.
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
A 9.1 9.5 0.358 0.374
B 9.5 9.9 0.374 0.390
S C 5.2 5.6 0.205 0.220
D 6.4 6.8 0.252 0.268
K F 3.4 3.8 0.134 0.149
H 2.0 2.4 0.079 0.095
K 11.3 11.7 0.445 0.460
L 1.7 2.1 0.067 0.083
C S 6.5 6.9 0.256 0.272
H
L
F
http://onsemi.com
5
MR2835S
FOOTPRINT
0.071
Minimum circuit board footprint
1.80
for Topcan Diode in Case 460-02 0.161
4.10
0.134
3.40
0.157
4.00
0.244
6.20
DIMENSIONS : inches
mm TOLERANCES 0.1
0.004
http://onsemi.com
6
MR2835S
Notes
http://onsemi.com
7
MR2835S
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com MR2835S/D
8