Académique Documents
Professionnel Documents
Culture Documents
Technical Specification
5-9250-B
2007-10-26
j
APPLICATION DESCRIPTION
TIS instrumentation is optional for following models: TIS is a CAN-bus based instrumentation for
DL320-5, DL320-7, DL310-5P, DL310-7P, DL310-5 longhole drilling. It is used for accurate position-
and DL310-7. ing of the drilling feed to the correct angle (Tilt
and Rotation). Optional features include also the
hole depth, penetration speed, drilling pressure
and data collection.
MAIN COMPONENTS
TIS instrument is equipped with side lasers
mounted to the carrier. These lasers are used
A 600 Display module for positioning the carrier to correct drill fan loca-
Side lasers Carrier mounted tion. This is done by lining the side lasers along
B 1 (optional) TIS P Percussion transducer the wall marks painted to the drift wall.
B 2 (optional) TIS P Rotation transducer
B 3 (optional) TIS P Feed transducer Big easy-to-use illuminated display shows the
B 4 (optional) TIS P Flushing transducer information clearly to the operator. Automatic
B5 Boom tilt sensor system check upon every start ensures reliable
B6 Rotation sensor operation. Clear and comprehensive diagnostic
B 7 (optional) TIS DDS Retainer transducer help in fault finding situations.
B 8 (optional) TIS DDS Rock drill position
sensor
TIS D drilling direction: Collected date is stored into the display unit.
Tilt and Rotation Data is in ASCII format comma separeted. Trans-
TIS DDS Drilling direction + fer of the data is done by using serial connection
Hole depth and pene- between TIS display unit and e.g portable PC or
tratration speed PDA.
TIS P Drilling pressures:
percussion, feed, rota-
tion and flushing Available for versions TIS D, TIS DDS, TIS P
TIS DDSP Drilling direction, Hole and TIS DDSP
depth, Penetratration Max number of events TIS D = 31 000
speed + drilling pres- in log memory which equals 1550 drill
sures meters at 5cm collec-
LOG All versions above are tion interval.
possible to include TIS DDSP =19 000
with data collection which equals 950 drill
feature meters at 5cm collec-
tion interval
Max number of opera- 10
tors indentified
MEASURING RANGE
Rotation 360°
Tilt +/- 45°
Hole depth unlimited
ACCURACY
Rotation 0,3°
Tilt 0,2°
Hole depth 0,1 m
Pressures 0,1 %
Sandvik Mining and Construction reserves the right to change this specification without further notice.