Académique Documents
Professionnel Documents
Culture Documents
Waste Water Treatment Plants and machines, which are assembled using
branded components. The components used to assemble our range are
sourced from the reliable and authentic supply chain who have years of
experience in this domain. Our entire range of products is manufactured under
the stringent guiding principles of our quality experts who assure flawless
delivery of consignment in the market.
Products offered by us include :
Coarse Bubble Disc Membrane Diffusers
Coarse Bubble Tube Diffusers
Fine Bubble Disc Membrane Diffusers
Fine Bubble Tube Membrane Diffusers
Fine Bubble Board Membrane Diffusers
Fine Bubble Plate Membrane Diffusers
Fine Bubble Vertical Membrane Diffusers
Twin / Tri Lobe Air Blowers
Bio-Filter Media
Bio-Rex Media
Bio-Fill Media
Bio-Cling Media
Bio-Roto Media
Tube Set Media-Chevron
Tube Set Media-Hexagonal
Tube Set Media-Square
Plate Filter Press
Belt Filter Press
Centrifuge-Basket type
Automatic / Manual Oil Skimmers
Agitators / Blenders / Mixers
Mechanical Surface Aerators - Fixed & Floating
Clariflocculator / Clarifier Scrapper Mechanism
PSF / DMF / MMF / ACF / IRF / Pressure Vessels
Screw Screen System
UV Disinfection System
AQUA-KLEAN Microbes Culture
Expansion Joint - Rubber / Fabric / Metallic
Instrumentation / Sensors
Dosing Pump (Diaphragm / Plunger)
Diffused Aeration Systems
Chemical Dosing Systems
Various Products for WTP, STP, ETP, RO Systems
Water 2 People Teknologies
101-A, SURYA DEEP BUILDING, WAZIRPUR COMM. COMPLEX, DELHI 110 052, INDIA
Ph. +91-8447651114, 8447651116, 8447651118, 8882787277, 8882187277, 8882137277
Website : www.w2ptek.com, www.w2pcare.com Email: water2people@gmail.com
MEMBRANE DIFFUSER
COARSE BUBBLE DIFFUSERS FINE BUBBLE DIFFUSERS
DISC TYPE SLEEVE TYPE VERTICAL TYPE BOARD TYPE PLATE TYPE
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
Advantage :
• High oxygen transfer efficiency.
• High resistance to clogging.
• High resistance to corrosion.
• Small diameter of air bubble.
• Wide air flow range.
• Low pressure loss.
• Low energy cost.
• Easy installation.
• Water-stirring effect.
• Back flow prevention.
• Self cleaning operation.
• Intermittent operation capability.
Application :
• Municipal wastewater treatment.
• Intermittent operation capability.
• Raw water treatment.
• Sludge stabilization.
• Aeration offish ponds.
• Aeration of streams and lakes.
so it possess excellences of larger specific surface, being easy to multiply biofilm, difficult
falling off, high denitrification, good hydrophile, high biological activity and so on. The Bio
Media provided from us is self cleaning and provide excellent surface ratio. The Bio-Film
grows on the bio media surface that moves along with the water inside the reactor
chamberand creates “Attach Microbe Bed” which carries the Biomass, also known as MBBR
= Moving Bed Bio Reactors. The biofilm carrier elements are produced from a material and
with a procedure that provides proper storage and usage, ensures a minimum aging time of
20 years. The media is self-cleaning, never needing backwashing.
Structure:
Made of High Grade Polypropylene material
Cylindrical Internal & External fins configuration
design ensure 100% clog free system
Resistant to the attack of rot, fungi, bacteria and other
microorganisms. Resistant to normal concentration of
wastewater acid, alkali, organic solvents and organic
compounds
Rigid and strong structurally
Uniform self-distribution
Long contact time between wastewater and the media
Easily expandable by extra addition of media elements
in the existing biofilter tank
APPLICATIONS :
Multi Sewer System Paper and Pulp Industry
Upgrade of older Plants Most Application with Organic Waste
Food Industry Oil and water Separation
Poultry Bio Media can Function as Buffer System
Dairy’s Aqua Culture & Fisheries
device works on the principle of pressure feeding due to which it delis optimum output at the
site of installation. W2P has a unique Sludge de-watering equipment for the de-watering of
the sludge and recovering the filtrate media i.e. water or process liquids. The moisture
content remains very low & sludge is taken out in care form it is manual or hydraulic operated
hence the closing & opening operation is very easy & can be operated by unskilled labor. The
dry cake sludge reduces the overall weight of the WWTP sludge there by the disposal cost of
the same. A feeding pump is used to force liquid through the medium leaving solid particles
trapped inside. W2P-Dewatering System can also be used for recovery of oil from surface
grinding operations where oil is used & re-circulated to the grinders.
FEATURES/ADVANTAGES:
Long Working life due to excellent resistance at high
temperature.
Lightweight makes handling easier.
Resistant to most acids, alkalis, chemicals and
abrasion.
Less cost of installation and maintenance.
Easy to operate and maintenance.
Long service life.
Maximum filtration efficiency.
Filter Presses are available in various sizes :
305mm X 305mm 355mm X 355mm
470mm X 470mm 610mm X 610mm
760mm X 760mm 800mm X 800mm
915mm X 915mm 1000mm X 1000mm
1200mm X 1200mm 1500mm X 1500mm
APPLICATIONS
ETP, STP, WTP, WWTP for various industries
Petrochemical, oily slurries and paint sludge
Chemical solid-liquid separation processes
Corrosive, acidic, alkaline slurry filtration
Metals, metal finishing, minerals
Tanneries and textile waste
Environmental Remediation
Pre-filtration & Clarification
FEATURES
S Very low power consumption.
S Low polymer usage.
S Long bearing life.
S Consistent cake solids.
S Automatic running.
S Full enclosure option for odour prevention.
ADVANTAGES
S Low ‘whole-life’ costs.
S Process reliability
S Process compliance
S Plant reliability
S Minimal operator input
S Outdoor operation
S Proven cost effective de-watering
APPLICATIONS
S Sewage treatment plant
S Water treatment plant
S Chemical Industries
S Pharmaceutical Industries
S Mineral Industries
S Paper Industries
S Food Industries
are discharged by various discharging methods namely- manually, bag lifting basket,
through scrapper, operated manually/pneumatically/hydraulically, for which different
models are available.
ADVANTAGES
u Level of vibration is much lower &
Operates very smoothly.
u Can be easily mounted on upper floor.
uCan be easily relocated.
uAlmost negligible maintenance cost for
suspension / mounting system.
uThe working area is free from abstracts
and a clean area can be maintained.
uAdditional weight of motor is take care by
additional supporting points.
uThe vibration dampers are almost
ADVANTAGES maintenance free.
S Low ‘whole-life’ costs.
S Process reliability
S Process compliance
S Plant reliability
S Minimal operator input
S Outdoor operation
S Proven cost effective de-watering
UNI BELT UNI TUBE UNI DISK MULTI BELT MULTI DISK
An oil skimmer is a special equipment that removes oil floating on the surface of water.
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
Oil contamination of waste water is a serious problem, and proper water decontamination
is no longer optional for any ethical enterprise. It is absolutely critical to the health of our
planet and the human species that we keep our water supply free of contamination,
especially petrochemicals. We have simply stressed the resources of the Earth too far for
further heedless exploitation. With intelligent use and management we will probably be
able to extend our comfortable dominion over nature indefinitely, but callous disregard for
environmental consequence is no longer possible for any moral or honest human being.
FEATURES/ADVANTAGES
l Helps maintain requirement of water discharge as per Govt.
Pollution Control Norms.
l Reduces Oil content less than 10 ppm in water / Effluent /
CETP final discharge.
l Greatly reduces oil disposal cost and makes reuse of recovered
oil for general lubrication purposes / Boiler Fuel / companies
reclaiming oil.
l It lifts and separates oil from pit with any draft without the use of
Pumps.
l Negligible maintenance, minimal power and easy to operate.
l Unit efficiently operates in hazardous as well as in turbulence /
fluctuating flow of liquid / effuent in drain.
l Easy to install, use and maintain without any extra cost &
spares.
l Continuous operation of unit without any labor.
APPLICATIONS
l Wastewater Sumps
lCoolants and Cutting Fluids
lHeat Treating
lParts Washers
lFood Processing Facilities
lSteel Mills / Scale Pits
lParking Lots, Garages and Service Facilities
lOutdoor Ponds, Lakes, Basins, Etc.
lRecovery / Monitoring Wells
A wide range of Mixing Devices and impellers and strong formation of operations fit into
the brand name of Water 2 People Teknologies, making it a truly global & comprehensive
company in Industrial machinery and laboratory equipment manufacturing industry.
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
Owing to our advances facilities, we are able to manufacture a superior quality range of
industrial Mixers that is help in mixing, homogenizing, gas dispersion and gentle stirring
of low viscous & high viscous liquids. These precision designed and engineered agitators
are extensively used basic chemical, polymer, paint, chemical labs, pharma., construction
chemicals, food, mineral industries.
SALIENT FEATURES
ü High Efficiency hydrofoil impellers to ensure better flow / mixing
with minimum power consumption as that of traditional impellers.
ü Wide spanning range of impellers enabling to select the
optimum element for each individual application.
ü Sweep Dia 0.5 Mtr. to 3.5 Mtr.
3
Vertical agitator for small open tank <3 m
The AGI-SM line, including three standard mixers, is designed for
economical mixing solutions, available with short deliveries. It has
a broad range of applications, including water treatment, fine
chemicals and end-products industries. Open and Sealed tank up
to 250 m3.
APPLICATIONS
l Chemical Industry lFat Industry
l Food Industry l Rubber Industry
l Petrol Industry l Textile Industry
l Papermaking Industry l Coal Related
l Fermenting Industry l Water Treatment
Water 2 People Teknologies
101-A, SURYA DEEP BUILDING, WAZIRPUR COMM. COMPLEX, DELHI 110 052, INDIA
Ph. +91-8447651114, 8447651116, 8447651118, 8882787277, 8882187277, 8882137277
Website : www.w2ptek.com, www.w2pcare.com Email: water2people@gmail.com
AERATORS
FIXED FLOATING
Aeration is the process of bringing water and air
into close contact in order to remove dissolved
gases, such as carbon dioxide, and to oxidize
dissolved metals such as iron. It can also be
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
ADVANTAGES
Exhibit high OTEs.
Exhibit high aeration efficiencies (mass oxygen
transferred per unit power per unit time).
Can satisfy high oxygen demands.
Are easily adaptable to existing basins for plant
upgrades.
Result in lower volatile organic compound
emissions than nonporous diffusers or mechanical
THUMB RULE aeration devices.
There are a number of approaches that can be
taken in calculating oxygen demand. What is
provided here are some empirical or rule-of-thumb
guides to estimate the oxygen requirement for
activated sludge. They are :
3 3
1,500 ft to 2,000 ft air/lb of 5 day biochemical
oxygen demand (BOD)
1.1 lb of oxygen transferred per lb of BOD
applied to a conventional activated sludge
system.
3
0.5 to 2.0 ft /air/gal of wastewater treated.
3
500 to 900 ft air/lb of BOD removed with at
least 3 ft3 air/min/ft of tank for mixing.
Water 2 People Teknologies
101-A, SURYA DEEP BUILDING, WAZIRPUR COMM. COMPLEX, DELHI 110 052, INDIA
Ph. +91-8447651114, 8447651116, 8447651118, 8882787277, 8882187277, 8882137277
Website : www.w2ptek.com, www.w2pcare.com Email: water2people@gmail.com
CLARIFIER
FIXED FLOATING
A clarifier is a device which clarifies Waste Water through the process of settling of heavy
particles of sludge (impurities) as well as suspended matter in water. Sludge and
suspended impurities being heavier settle at the bottom of the clarifier tank. A scraper
blade rotates at the bottom of the conical bottom tank. This scraps the sludge settled on
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
the slope of the conical bottom. The blades through their gradual sweeping action bring
down the sludge to the centre of the clarifier tank, from where it is pumped out. Thus
sludge and sediment material is continuously removed from the bottom of the clarifier
tank. Some times in specific cases a scum removal mechanism is also provided to skim
off the oil floating at the top of the clarifier tank.
ADVANTAGES
Lower installed cost.
Easily installed indoors
Minimal start-up / re-start time
Lower maintenance costs.
Occupies less floor space.
Minimal field labor required to install.
Relief from the frequent maintenance of
chocking bottom sludge pipe.
No separate buying and installing of
sludge recirculation pumps.
No special construction R.C.C. dry sump
for pump.
CLARIFLOCCULATOR
Clariflocculator are generally used for chemical primary treatment for effluent. Instead
of separate flocculation & clarification, clariflocculators are generally used. This
results into economical and faster installation of primary treatment. W2P
Clariflocculators are having high torque centre drive with sludge arm device. We are
the only manufacturers to provide this feature as standard. main feature of
clariflocculator, unlike other is, concentric paddle type flocculator mechanism which
creates the flocs throughout the flocclation zone.