Académique Documents
Professionnel Documents
Culture Documents
27 9:54 AM Page 1
ANTENNA/CABLE CONNECTIONS
CAUTION: TO PREVENT ELECTRIC UHF/VHF Rod *Some cable TV systems use scram-
SHOCK, MATCH WIDE BLADE OF Antenna bled signals and require a special con-
PLUG TO WIDE SLOT, FULLY verter to receive these channels.
INSERT. Consult your local cable company.
VHF
Antenna CATV Box *
Before plugging the UHF/VHF Rod (Not supplied) or Satellite Box
Antenna into the ANT(enna). IN jack, check (Not supplied)
that the pin is not bent. If it is bent, straight- UHF
Antenna
en the pin as illustrated, then plug the pin (Not supplied)
into the ANT(enna). IN jack.
ANT.IN
OUT IN
From Cable System
Bent pin or Satellite Antenna
75-ohm
75-ohm Coaxial Cable
Coaxial Cable
Cable Plug ANT. IN
OR OR
(Needs to be straightened) (Straight pin) From Cable System
VHF/UHF Combiner
(Not supplied)
VHF/UHF
Combination Antenna
(Not supplied)
CLOSED CAPTION
This TV can receive C1 and C2 of Caption and Text. Notes:
Caption Mode (1) When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or
(1) Characters can be displayed on the TV screen when the received broadcast signal contains the text.
Caption Signals. (2) Captions and texts may not match the TV voice exactly.
(2) Paint-on mode: Displays input characters on the screen immediately. (3) Interference may cause the closed caption system not to function properly.
Pop-on mode: Once characters are stored in memory, it is displayed all at once. (4) The caption or text characters will not be displayed while the menu display or function’s dis-
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines) play is shown.
Note: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will (5) If you see this screen!!
not be displayed.
Text Mode
(1) Displays the text on the screen by scrolling (max. 7 lines)
(2) If the received broadcast signal does not contain the caption or text signal, no change will If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
occur. clear screen, select CAPTION C1, C2 or CAPTION [OFF].
L6014.QX33 01.11.27 9:54 AM Page 2
WARNING: FIGURE A
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANCE TO RAIN OR MOISTURE. ANTENNA
LEAD IN
WIRE
1. Read instructions-All the safety and operating instruc- by the manufacturer. An appliance and cart combina- 13. Outdoor Antenna grounding-If an outside antenna or 18. Servicing-Do not attempt to service this TV yourself as
tions should be read before the appliance is operated. tion should be moved with care. Quick stops, excessive cable system is connected to the TV, be sure the anten- opening or removing covers may expose you to dan-
2. Retain Instructions-The safety and operating instruc- force, and uneven surfaces may cause the appliance na or cable system is grounded so as to provide some gerous voltage or other hazards. Refer all servicing to
tions should be retained for future reference. and cart combination to overturn. protection against voltage surges and built-up static qualified service personnel.
3. Heed Warnings-All warnings on the appliance and in 9. Ventilation-Slots and openings in the cabinet and the charges. Article 810 of the National Electrical Code, 19. Damage Requiring Service-Unplug this TV from the
the operating instructions should be adhered to. back or bottom are provided for ventilation and to ANSI/NFPA No. 70, provides information with respect wall outlet and refer servicing to qualified service per-
4. Follow Instructions-All operating and use instructions ensure reliable operation of the TV and to protect it to proper grounding of the mast and supporting struc- sonnel under the following conditions:
should be followed. from overheating, these openings must not be blocked ture, grounding of the lead-in wire to an antenna dis- a. When the power supply cord or plug is damaged or
5. Cleaning-Unplug TV from the wall outlet before clean- or covered. The openings should never be blocked by charge unit, size of grounding conductors, location of frayed.
ing. Do not use liquid cleaners or aerosol cleaners. Use placing the TV on a bed, sofa, rug, or other similar sur- antenna-discharge unit, connection to grounding elec- b. If liquid has been spilled, or objects have fallen into
a damp cloth for cleaning. face. This TV should never be placed near or over a trodes, and requirements for the grounding electrode. the TV.
EXCEPTION: A product that is meant for uninterrupt- radiator or heat register. This TV should not be placed (Fig. A) c. If the TV has been exposed to rain or water.
ed service and, that for some specific reason, such as in a built-in installation such as a bookcase or rack 14. Lightning-For added protection for this TV receiver d. If the TV does not operate normally by following the
the possibility of the loss of an authorization code for a unless proper ventilation is provided or the manufac- during a lightning storm, or when it is left unattended operating instructions. Adjust only those controls that
CATV converter, is not intended to be unplugged by turer’s instructions have been adhered to . and unused for long periods of time, unplug it from the are covered by the operating instructions, as improper
the user for cleaning or any other purpose, may 10. Power Sources-This TV should be operated only from wall outlet and disconnect the antenna or cable system. adjustment of other controls may result in damage and
exclude the reference to unplugging the appliance in the type of power source indicated on the marking This will prevent damage to the TV due to lightning will often require extensive work by a qualified techni-
the cleaning description otherwise required in item 5. label. If you are not sure of the type of power supply to and power-line surges. cian to restore the TV to its normal operation.
6. Attachments-Do not use attachments not recommended your home, consult your appliance dealer or local 15. Power Lines-An outside antenna system should not be e. If the TV has been dropped or damaged in any way.
by the TV manufacturer as they may cause hazards. power company. For TVs intended to operate from bat- located in the vicinity of overhead power lines or other f. When the TV exhibits a distinct change in perfor-
7. Water and Moisture-Do not use this TV near water, for tery power, or other sources, refer to the operating electric light of power circuits, or where it can fall into mance-this indicates a need for service.
example, near a bath tub, wash bowl, kitchen sink, or instructions. such power lines or circuits. When installing an outside 20. Replacement Parts-When replacement parts are
laundry tub, in a wet basement, or near a swimming 11. Grounding or Polarization-This TV is equipped with a antenna system, extreme care should be taken to keep required, be sure the service technician uses replace-
pool, and the like. polarized alternating-current line plug(a plug having from touching such power lines or circuits as contact ment parts specified by the manufacturer that have the
8. Accessories-Do not place this TV on an unstable cart, one blade wider than the other). This plug will fit into with them might be fatal. same characteristics as the original part. Unauthorized
stand, tripod, bracket, or table. The TV may fall, caus- the power outlet only one way. This is a safety feature. 16. Overloading-Do not overload wall outlets and exten- substitutions may result in fire, electric shock, injury to
ing serious injury to someone, and serious damage to If you are unable to insert the plug fully into the outlet, sion cords as this can result in a risk of fire or electric persons or other hazards.
the appliance. Use only with a cart, stand, tripod, try reversing the plug. If the plug should still fail to fit, shock. 21. Safety Check-Upon completion of any service or
bracket, or table recommended by contact your electrician to replace your obsolete outlet. 17. Object and Liquid Entry-Never push objects of any repairs to this TV, ask the service technician to perform
PORTABLE CART WARNING
the manufacturer, or sold with the Do not defeat the safety purpose of the polarized plug. kind into this TV through openings as they may touch routine safety checks to determine that the TV is in
TV. 12. Power-Cord Protection-Power-supply cords should be dangerous voltage points or short out parts that could proper operating condition.
Any mounting of the appliance routed so that they are not likely to be walked on or result in a fire or electric shock. Never spill liquid of 22. Heat-This TV product should be situated away from
should follow the manufacturer’s pinched by items placed upon or against them, paying any kind on the TV. heat sources such as radiators, heat registers, stoves, or
instructions and should use a particular attention to cords at plugs, convenience other products (including amplifiers) that produce heat.
mounting accessory recommended receptacles, and the point where they exit from the
S3126A appliance.
ANT.IN
MENU VOLUME CHANNEL POWER
1 2 3 4 5 6 7 8 15
16
1. VIDEO (in) jack- Connect to the video 9. CHANNEL NUMBER buttons- Press two 14.GAME button- Press to set the Game
- REMOTE CONTROL - output jack of a video camera or VCR. digits to directly access the desired channel. mode and external input mode at the same
2. AUDIO (in) jack- Connect to the audio Remember to press a "0" before a single time. Press the GAME button again to exit
output jack of a video camera or VCR. digit channel. this mode.
14
POWER GAME SLEEP 3. EARPHONE jack- To connect earphone +100 button- Press to select cable channels 15.ANT(enna). IN jack- Connect to an anten-
7 13 (not supplied) for personal listening. which are equal or greater than number na, cable system, or satellite system.
DISPLAY
1 2 3 12 4. MENU button- Press to display the menu 100. 16.AC cord- Connect to a standard AC outlet
on the TV screen. 10.MUTE button- Press the MUTE button to (120V/60Hz).
9
4 5 6
CHANNEL
RETURN
5. VOLUME ▲/▼ buttons- Press to control turn off the sound portion of the TV pro- NOTE: Remove the AC cord from the
7 8 9 11 the volume level. gram. (Volume level display turns LIGHT hook to avoid breaking a wire before you
0 +100
Press to determine a setting mode from the RED from LIGHT BLUE.) Press the connect to a standard AC outlet.
menu on the TV screen. (only the VOL ▲ MUTE button again or press the VOL(ume)
button) ▲ or ▼ button to restore sound. INSTALLING THE BATTERIES
6 Press to select or adjust from a particular 11.CHANNEL RETURN button- Press this
CH
VOL VOL menu. (for example: Language Selection, button to go back to the previously viewed 1
5 CH
Channel Presetting, Closed Caption Selection, channel. For example, pressing the CHAN- Slide the battery compartment cover on the
MUTE Picture Adjustment, V-CHIP Set Up) NEL RETURN button once will change remote unit.
10
6. CHANNEL ▲/▼ buttons- Press to select channel display from CH 3 (present chan-
MENU 2
4 memorized channel. nel) to CH 10 (previously viewed channel),
NOTE:CHANNEL SET UP MUST BE and pressing it a second time will return Insert 2 "AA" penlight batteries into battery
COMPLETED BEFORE THE SET WILL from CH 10 to CH 3. compartment in the direction as indicated by
FUNCTION PROPERLY. SEE INSIDE 12.DISPLAY button- Press to display the the polarity (+ / -) markings. Batteries installed
FOR PROCEDURE. channel number on the screen. If you press with incorrect polarity may damage the remote
Press to select a setting mode from the it again, the channel number will disappear. unit.
menu on the TV screen. 13.SLEEP button- Press the SLEEP button to 3
Press to select item you want to adjust in display the sleep timer and start the func- Replace the cover.
the picture control mode. tion. The shut off time can be determined
7. POWER button- Press to turn the TV ON by the number of times you press the but-
and OFF. ton. (0, 10, 20, 30,..90, 0 minutes)
8. Infrared Sensor Window- Receives the
infrared control signals from the remote
control unit.
L6014.QX33 01.11.27 9:54 AM Page 3
LANGUAGE SELECTION 4
If you want to change the language of the on-screen menu, follow the procedure below. Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
1 Then, press the VOL(ume) ▲ button. ADD/DELETE
AUTO MEMO
The tuner scans and memorizes all active channels in
Connect the power cord to a standard AC outlet. your area.
Note: If some digits appear in the corner of the screen, ● The TV distinguishes between standard TV channels
press the POWER button without unplugging the power cord. and cable channels.
2 ● When AUTO MEMO action is completed, the lowest
PICTURE
Press the POWER button to turn on the TV. CHANNEL SET memorized channel reappears on the screen.
3
[ENGLISH]FRANÇAIS ● When you press the CH(annel) ▲ or ▼ button after
V-CHIP SET UP
CAPTION [OFF] selecting AUTO MEMO, the tuner will stop at the memorized
Press the MENU button so that the menu display appears
channels only.
on the TV screen.
● The TV may recognize TV channels to be CATV channels
4 by the receiving conditions. In this case, try AUTO MEMO action again
PICTURE
Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]". CHANNEL SET in the fine receiving conditions.
[ENGLISH]FRANÇAIS
5 V-CHIP SET UP
CAPTION [OFF] [ADD/DELETE FUNCTION]
Select "ENGLISH" or "FRANÇAIS" = French by using
1) Press the MENU button so that the menu display appears on the TV screen.
the VOL(ume) ▲ or ▼ button.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
6 Then, press the VOL(ume) ▲ button. PICTURE
Press the MENU button to exit the menu. 3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected. CHANNEL SET
[ENGLISH]FRANÇAIS
4) Use the CH(annel) ▲ or ▼ button to select the V-CHIP SET UP
CAPTION [OFF]
channel you wish to put into memory or to erase from memory.
CHANNEL PRESETTING Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
NOTE:CHANNEL SET UP MUST BE COMPLETED BEFORE THE SET WILL FUNCTION screen. ADD/DELETE
PROPERLY. ● Press the VOL(ume) ▲ or ▼ button to light up the channel number AUTO MEMO
To preset a channel or to change a preset channel, follow the procedure below.
in LIGHT BLUE if you wish to add the channel into memory.
1 ● Press the VOL(ume) ▲ or ▼ button to light up the channel number
Press the POWER button to turn on the TV. PICTURE in LIGHT RED if you wish to erase the channel from memory.
CHANNEL SET
2 [ENGLISH]FRANÇAIS 5) Press the MENU button to exit the menu.
V-CHIP SET UP
Press the MENU button so that the menu display appears CAPTION [OFF]
on the TV screen.
RESUME FUNCTION
3
PICTURE If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". CHANNEL SET
ly when the power resumes.
Then, press the VOL(ume) ▲ button. [ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
OPERATIONS
[-] GAME MODE [+] [-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+]
OFF ON
L6014.QX33 01.11.27 9:54 AM Page 4
OPERATIONS (Continued)
[TV RATING SET UP]
V-CHIP SET UP 1
V-CHIP enables parents to prevent their children from watching inappropriate material on TV. Press the MENU button so that the menu display appears on the TV screen.
PICTURE
V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies 2 CHANNEL SET
on premium cable channels, and Emergency Broadcast System signals), then denies access to pro- Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP". [ENGLISH]FRANÇAIS
gramming if the program's rating meets the limitations you select. In this case, "PROTECTED Then, press the VOL(ume) ▲ button. V-CHIP SET UP
CAPTION [OFF]
PROGRAM by ..." message appears on the TV screen. 3
To block ratings, follow the steps below. Press the CH(annel) ▲ or ▼ button to point to "TV RATING".
● Programming may be rated by the Motion Picture Association of America (MPAA) or according Then, press the VOL(ume) ▲ button. PICTURE
TV RATING
4 CHANNEL SET
MPAA RATING
to the Television Parental Guidelines. In order to block any inappropriate programming, set [ENGLISH]FRANÇAIS
your limits in both places (MPAA RATING and TV RATING). Press the CH(annel) ▲ or ▼ button to point to your desired item. V-CHIP SET UP
● You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. CAPTION [OFF]
this case, change to the unblocked channel, then press the MENU button. <Selection> <Rating Category Explanations>
• TV-Y: Appropriate for all children
TV-Y
PICTURE [VIEW]
• TV-Y7: Appropriate for children seven and older TV-Y7 ( SET ) [VIEW]
[MPAA RATING SET UP] • TV-G: General Audience CHANNEL
PICTURE TV-G [VIEW]
[ENGLISH]FRANÇAIS
1 CHANNEL SET • TV-PG: Parental Guidance suggested. V-CHIP( SET )UP
TV-PG [VIEW]
[ENGLISH]FRANÇAIS • TV-14: Unsuitable for children under 14 TV-14 ( )
CAPTION [OFF] [VIEW]
Press the MENU button so that the menu display appears on the TV screen. V-CHIP SET UP • TV-MA: Mature audience only TV-MA ( ) [VIEW]
CAPTION [OFF]
2
● When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK]
Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP". automatically. Also, the lower rating will turn [VIEW] automatically.
Then, press the VOL(ume) ▲ button. ● When you turn "TV-Y" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or
PICTURE
TV RATING
CHANNEL SET
[VIEW] automatically.
3 MPAA RATING
[ENGLISH]FRANÇAIS ● When you turn "TV-MA" to [VIEW], the all ratings will turn to [VIEW] automatically.
Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING". V-CHIP SET UP
CAPTION [OFF] When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the
Then, press the VOL(ume) ▲ button. sub-ratings will appear on the TV screen.
4 If you select the rating category (example: TV-PG) and turn it [BLOCK] or
[VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or
Press the CH(annel) ▲ or ▼ button to point to your desired item. G
PICTURE [VIEW]
[VIEW] automatically. PICTURE
PG
CHANNEL [VIEW]
SET TV-Y7 [BLOCK]
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. PG-13 [VIEW]
[ENGLISH]FRANÇAIS You can set the sub-ratings to [BLOCK] or [VIEW] individually when the
CHANNEL SET
[ENGLISH]FRANÇAIS
R
V-CHIP SET[BLOCK]
UP rating category is set to [BLOCK]. To set the sub-ratings individually, follow FVV-CHIP SET UP
[BLOCK]
<Selection> <Rating Category Explanations> NC-17
CAPTION [BLOCK]
[OFF]
• G: General Audience X [BLOCK] the steps below. CAPTION [OFF]
• NC-17: No one under 17 admitted Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. CHANNEL SET
D[ENGLISH]FRANÇAIS
[BLOCK]
• X: Mature audience only ● When you select [TV-PG], [TV-14] or [TV-MA]: [BLOCK]
LV-CHIP SET UP
Press the CH(annel) ▲ or ▼ button to select "D"(Suggestive Dialog), [BLOCK]
SCAPTION [OFF]
"L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence). Then, V [BLOCK]
● When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn [VIEW] automatically. press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
● When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] Note: When you select [TV-MA], "D" does not appear on the TV screen. TV-Y
PICTURE [VIEW]
automatically. ● The sub-ratings which set to [BLOCK] appears next to the rating category TV-Y7 (
CHANNEL ) [VIEW]
SET
TV-G [BLOCK]
[ENGLISH]FRANÇAIS
● When you turn "X" to [VIEW], the all ratings will turn to [VIEW] automatically. in the TV RATING menu. TV-PG (DLSV) [BLOCK]
V-CHIP SET UP
5 5 TV-14 (DLSV)
CAPTION [BLOCK]
[OFF]
TV-MA ( LSV) [BLOCK]
Press the MENU button to exit the menu.
Press the MENU button to exit the menu.
Batteries ("AA" x 2)
Picture Rolls Vertically
Rod Antenna
Picture Blurred
Weak Picture
As an ENERGY STAR ® Partner, our company has determined that this product meets
the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark.