Académique Documents
Professionnel Documents
Culture Documents
Service
Manual
Vickers
Air-Shields V Medical
LIMITED
WARRANTY
The product being described in this manual is warranted against def ects in materials or workmanship for one year from the date of
shipmentfrom Air-Shields, Hatboro, with the following exceptions.
All consumable and disposable producís are guaranteed to be free from def ects upon shipment only.
Calibrations are considered normal maintenance and are not inciuded in the 1 year warranty.”
During the warranty period any detective parts other than those Usted above wiíl be replaced at no charge to the customer. There
will be no labor charge for repíacing the parts within the continental U.S.
This warranty is rendered void and Air-Shields cannot be held Hable for conditions resultant therefrom if:
3. The customer uses any parts, accessories, or fittings notspeclfied or sold by Air-Shields.
This warranty is in lieu of all other warranties, expressed or implied, and Air-Shields shall in no event be iiable for incidental or
consequential damages including loss of use, property damage, or persona! injury resulting from breach of warranty.
'The Accreditation Manual for Hospitals requires each piece of equipment is to be tested prior to initial use and at least annual ly th
ereafter. To comply with this standard, we recommend thatyou particípate in ou r Preventive Maintenance Program during the
warranty period. This service can be performed by certified technlcians through our Product Service Group and authorized dealers.
1 * ■
r Printed in ,
U.S.A. 12/8
Cat. No. 68 990 13-17 Change 01 9/83
[A123456789 Change 02 10/8
I E123456789 . f) Change 03 4
6/85
i, Change 04 11/8
Change 05 4/86
Change 06 10/8
Change 07 4/87
í Change 08 9/87
Change 09 1/88
Change 10 4/90
Change 11 1/91
Change 12 3/92
Change 13 1/93
Change 14 11/9
Change 15 3
3/94
Change 16 4/95
Air-Shields V
330 Jacksonville Road, Hatboro, PA19040
Elimina la filigrana digital ahora
PLEASE READ
Please check the A page for change information.
Since Air-Shields Vickers conducts a continuous product improvement program, circuit and
component improvements are sometimes incorporated into equipment before they can be
incorporated into the printed manuals. When this occurs, changed material is provided on sepárate
sheets at the rear of the manual or under sepárate cover in the form oí a change package. Changed
material on each page of text is indicated by a vertical bar in the margin next lo the changed
material, as shown on the right. ■
1
Elimina la filigrana digital ahora
2 68 903 71
PROBE FAIL CORRECTION RETROFIT KIT
Modifies the Controller to ensure that the AIR and SKIN digital
displays blank if the air and skin temperatura probe opens or
shorts. The components supplied in this kit are identified in the
applicable parts list (Sect. 6) by an (*) and reference designation as
follows: C3, C9, CR1 and CR6.
3 68 903 72
DISPLAY DRIFT CORRECTION RETROFIT KIT
Modifies the Controller to ensure the digital displays track to the
actual temperatura. The components supplied in this kit are
identified in the applicable parts list (Sect. 6) by an (*) and
reference designation as follows: C1, C4, C7, C10, CR9, R5, R6,
R16, R17, R24 and R34.
2
Elimina la filigrana digital ahora