Académique Documents
Professionnel Documents
Culture Documents
2. Set the Network settings for communicating between the PC and Detector
4. Run DeviceConfig.exe
- Change the directory path if you can’t use the default ‘D:\’ drive
8. Run ExamVue.exe
Settings for Calibration
You can copy the file to the CD enclosed in he shipped product package.
2. Open cfg.proerties file (C:\ API4.7.x_NDTx.x.x’ \CareRay\) and change below settings:
- Change the directory path if you can’t use the default ‘D:\’ drive
This value has to be matched compared with the selected detector mode in the
DetectorConf.xml file
[DetectorConf.xml]
3. To calibrate the detector, please run the execution file, ‘CarerayImageNDT Vx.x.x.exe’
- Click the Correction button and check the ‘Fixed Position Corr’
- Click the Modify button to change the Integration time for the calibration
- Click ‘Calibration’ menu and select the ‘One shot Calibration’ menu
- Move to the Detector Tap menu and click the Correction button and then select the
‘Fixed Position Corr’
- Click the Sync Mode button and select the ‘AED Sync’ mode
- Click the ‘Exposure’ tap menu and click the ‘Acq Rad Img’ button
*if you need to change the IP address of the selected detector, you have to contact to the
administrator
3. Run DeviceConfig.exe
5. Run ExamVue.exe
1. In order to check the wireless configuration, install the detector as the wired mode
2. Set the Network settings for communicating between the PC and Detector
7. Check the ESSID and change the name if you need to change.
You don’t need to have the interface box, data cable and LAN cable.
13. Prepare and turn on the AP router for the wireless mode
14. Connect to the LAN Cable to the PC to change the settings for the wireless detector
- SSID
- Wireless
15. Set the Network settings for communicating between the PC and Detector
18. Click the 2.4GHz wireless settings and disable (or stop) the 2.4GHz
19. Click the 5GHz wireless settings and change the SSID name
At the time you have to definitely input the name checked the wireless settings configuration.
20. Click the inside network settings and change the IP address as shown
21. Click the Save button and Restart the AP Router
22. Set the Network settings for communicating between the PC and Detector
23. If you need to use the wireless LAN card on the PC, you have to choose the SSID called as
“CarerayAP-5G” on the wireless list, also you have to change the IP number as 192.168.68.20