Académique Documents
Professionnel Documents
Culture Documents
INDUSTRIAL FLOORINGS
Solvent less epoxy primer for damp surface
Description
Dr. Fixit Superseal P-110 is a two component, epoxy resin based liquid primer suitable for application over
concrete surfaces. It is composed of high solid epoxy resin, hardener and additives. It has excellent moisture
insensitive characteristics and even cures over damp concrete surfaces prior to coating system applications.
Has excellent adhesion over concrete for the subsequent coatings.
Features
}}Ease of application - Easy to mix &apply by brush / roller/putty patra
}}Bonding - Bonds strongly even to damp concrete surfaces (up to 8% moisture content).
}}Blistering - Does not blister on curing.
}}Resistance - Good resistance to mineral and organic acids, alkalies and mild solvents.
Packing
10 litre (Part A: 5 litre and Part B: 5 litre)
Method of Application
The quality & performance of final coating is dependent on the substrate & material / application temperature.
The recommended substrate temperature is min 5°C & max 30°C.
1 S U R FAC E P R E PA R AT I O N
}}Remove laitance, dirt & unsound plaster or concrete, paints, oil, grease, curing compounds, corrosion deposits &
algae etc.
}}Roughen the surface by any mechanical means like wire brushing, sand or grit blasting to improve bonding.
}}Clean the surface by vacuum cleaner or other suitable means to remove dust & dirt.
}}The minimum application temperature for Dr. Fixit Superseal P 110 is 50C and maximum temperature for
application is 300C.
}}The compressive strength of the concrete substrate should be at least 15 MPa at 28 days.
2 MIXING
}}The resin & hardener components should be stirred/shake separately in their individual packs.
}}The entire content of the Part-B (hardener) should be poured into the Part-A (resin) & thoroughly mixed using a
slow speed stirrer / drill with mixing paddle for 2-3 minutes. The sides of the tin should then be scraped & mixing
should continue for further 2 minutes.
3 A P P L I C AT I O N
}}Dr. Fixit Superseal P-110 is designed with an application time for over coating for 24 hours at 20°C, 10 hours at
35°C & 5-6 hours at 45°C.
}}After mixing apply by brush or roller to the prepared surface.
4 CLEANING
}}All tools & tackles are to be cleaned immediately after application with industrial grade solvents like Xylene,
Acetone or Epoxy thinner and followed by soap water solution.
-16/09/19
137
INDUSTRIAL FLOORINGS
Technical Information
Physical Parameter
Dr. Fixit Superseal P-110
Mixed
Mixing Ratio 1 : 1 by volume
(Part A : Part B)
Physical Form Amber coloured
liquid
Specific gravity @ 300C g/cm3 1.05 ± 0.05
Applications
Parameters
1 Pot life @ 250C minutes > 40.00
2 Pot life @ 30 C
0
minutes > 30.00
3 Surface dry @ 300C hr 2.0 – 4.0
4 Tack free @ 300C hr 4.0 – 6.0
5 Hard dry @ 300C hr > 24.0
Performance
Parameters
1 Bond strength on Concrete ASTM D 7243 N/mm2 > 1.50
2 Bond strength on Concrete ASTM D 7234 N/mm 2
> 1.50
@ 8% Moisture content
Theoretical Coverage
5-8 sq. meters per litre / coat
* Coverage depends upon surface profile of the substrate (Concrete substrates).
Shelf Life
Shelf life is 12 months from date of manufacturing. Store in cool & dry place in unopened condition.
138
INDUSTRIAL FLOORINGS
Health & Safety
Skin Contact - Wash skin with soap & water. remove contaminated clothes. See medical attention if irritation per-
sists. Do not use solvent.
Eye Contact - Immediately flush eyes with plenty of water for at least 15 minutes. eyelids should be held away from
the eyeball to ensure thorough rinsing. Consult Physician if irritation persists.
Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
Construction Chemicals Division & its agents has been provided in good faith & meant to serve only as a general
Ramkrishna Mandir Road, Post Box No. 17411 guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA
products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
used and the on-site workmanship are factors beyond our control, there are no
www.drfixit.co.in • info.drfixit@pidilite.com expressed or implied guarantee / warranty as to the results obtained. The company
Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504 does not assume any liability or consequential damage for unsatisfactory results,
139