Vous êtes sur la page 1sur 30

ENG-6100-2013T(UGRD) Engineering

Drawing Prelims

Started on Monday, 3 August 2020, 7:21 PM


State Finished
Completed on Monday, 3 August 2020, 7:37 PM
Time taken 16 mins
Marks 45.00/50.00
Grade 9.00 out of 10.00 (90%)

Engineering drawing is called the _______ language of engineers.

Select one:

a. Mechanical

b. Universal 

c. Computer

d. Programming

Feedback
Your answer is correct.

The correct answer is: Universal

Question 2
Correct

Mark 1.00 out of 1.00

Flag question
Question text
It is a curve traced by a point on a perfectly flexible string, while unwinding from around a
circle or polygon the string being kept taut (tight).

Select one:

a. Parabolic Curve

b. Application of Conic Curves

c. Cycloid

d. involute 

Feedback
Your answer is correct.

The correct answer is: involute

Question 3
Correct

Mark 1.00 out of 1.00

Flag question

Question text
A plain scale is simply a line which is not divided into a suitable number of equal parts, the
first of which is not further sub-divided into small parts.

Select one:

True

False 

Feedback
The correct answer is 'False'.
Question 4
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Drawing small objects such as watch parts, instrument components etc., use of full scale
may not be useful to represent the object clearly.

Select one:

True 

False

Feedback
The correct answer is 'True'.

Question 5
Correct

Mark 1.00 out of 1.00

Flag question

Question text
If the angle a is equal to Θ i.e., when the section plane C-C is parallel to the slant side of the
cone.

Select one:

a. None of the choices


b. Parabola 

c. Cone

d. Cube

Feedback
Your answer is correct.

The correct answer is: Parabola

Sum of angles of quadrilateral is 90 degree .


Select one:

True 

False

Feedback
The correct answer is 'False'.

Question 7
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Pencils for construction lines, Dimension lines, Leader lines, Extension lines, Center lines,
Hatching lines and Hidden lines.

Select one:

a. None of the choices

b. 2H hard grade 

c. HB soft grade


d. H medium grade

Feedback
Your answer is correct.

The correct answer is: 2H hard grade

Question 8
Correct

Mark 1.00 out of 1.00

Flag question

Question text
When the asymptotes to the hyperbola intersect each other at right angles.

Select one:

a. Epi-Cycloid and Hypo-Cycloid

b. Rectangular Hyperbola 

c. Cycloid

d. Application of Conic Curves

Feedback
Your answer is correct.

The correct answer is: Rectangular Hyperbola

Question 9
Correct

Mark 1.00 out of 1.00


Flag question

Question text
Plain scales are used to read lengths in two units such as metres and decimetres,
centimetres and millimetres etc., or to read to the accuracy correct to first decimal.

Select one:

True 

False

Feedback
The correct answer is 'True'.

Question 10
Correct

Mark 1.00 out of 1.00

Flag question

Question text
RF stands for Representative Fraction.

Select one:

True 

False

Feedback
The correct answer is 'True'.
Question 11
Incorrect

Mark 0.00 out of 1.00

Flag question

Question text
Using compass, scale, sets square ( 30 – 60, 45-45), protractor are used to draw basic
geometrical shapes.
Select one:

True

False 

Feedback
The correct answer is 'True'.

Straight continuous narrow line with zigzags is used to represent break of an object.

Select one:

a. Construction Lines: Type 01.1 (Continuous narrow Lines)

b. Break Lines: Type 01.1 (Continuous Narrow Freehand Lines)

c. Break Lines: Type 01.1 (Continuous Narrow Lines With Zigzags) 

d. Guide Lines: Type 01.1 (Continuous Narrow Lines)

Feedback
Your answer is correct.

The correct answer is: Break Lines: Type 01.1 (Continuous Narrow Lines With Zigzags)

Question 13
Correct

Mark 1.00 out of 1.00


Flag question

Question text
Pencils for Border lines, lettering and free sketching

Select one:

a. H medium grade

b. 2H hard grade

c. HB soft grade     

d. None of the choices

Feedback
Your answer is correct.

The correct answer is: HB soft grade    

Question 14
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Spacing between characters = a = _________.

Select one:

a. (4/10)b
b. (2/10)b 

c. (3/10)b

d. (1/10)b

Feedback
Your answer is correct.

The correct answer is: (2/10)b

Question 15
Correct

Mark 1.00 out of 1.00

Flag question

Question text
A curve traced by a point on the circumference of a generating circle, when it rolls inside the
directing circle.

Select one:

a. epi-cycloid

b. Parabolic Curve

c. hypo-cycloid 

d. Application of Conic Curves

Feedback
Your answer is correct.

The correct answer is: hypo-cycloid

Question 16
Correct

Mark 1.00 out of 1.00


Flag question

Question text
These are aids used for drawing small features such as circles, arcs, triangular, square and
other shapes and symbols used in various science and engineering fields.

Select one:

a. Flexible curve

b. French Curve

c. Templates 

d. Set of Scales

Feedback
Your answer is correct.

The correct answer is: Templates

Question 17
Correct

Mark 1.00 out of 1.00

Flag question

Question text
When a cone is cut by a section plane A-A making an angle a = 90° with the axis.

Select one:

a. Circle 
b. Cube

c. None of the choices

d. Cone

Feedback
Your answer is correct.

The correct answer is: Circle

Question 18
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Inclined and curved lines are drawn from________.

Select one:

a. None of the choices

b. top to bottom 

c. bottom to top

d. bottom to top

Feedback
Your answer is correct.

The correct answer is: top to bottom

Spacing between words = e = _________.


Select one:

a. (4/10)b

b. (3/10)b

c. (5/10)b

d. (6/10)b 

Feedback
Your answer is correct.

The correct answer is: (6/10)b

Question 20
Correct

Mark 1.00 out of 1.00

Flag question

Question text
This method is used where a number of dimensions have a common datum feature.
Select one:

a. None of the choices

b. Parallel dimensioning 

c. Chain dimensioning

d. Curve line

Feedback
Your answer is correct.

The correct answer is: Parallel dimensioning

Question 21
Correct

Mark 1.00 out of 1.00


Flag question

Question text
A curve finds its application for reflecting surfaces of light, Arch forms, cable forms in
suspension bridges, wall brackets of uniform strength, etc.

Select one:

a. Cycloid

b. Parabolic Curve 

c. Application of Conic Curves

d. Epi-Cycloid and Hypo-Cycloid

Feedback
Your answer is correct.

The correct answer is: Parabolic Curve

Question 22
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Wavy continuous narrow line drawn freehand is used to represent break of an object.

Select one:

a. Guide Lines: Type 01.1 (Continuous Narrow Lines)


b. Construction Lines: Type 01.1 (Continuous narrow Lines)

c. Break Lines: Type 01.1 (Continuous Narrow Lines With Zigzags)

d. Break Lines: Type 01.1 (Continuous Narrow Freehand Lines) 

Feedback
Your answer is correct.

The correct answer is: Break Lines: Type 01.1 (Continuous Narrow Freehand Lines)

Question 23
Incorrect

Mark 0.00 out of 1.00

Flag question

Question text
We can also calculate the area of irregular shape by drawing many big size square and
triangles into the drawing. We can add area of all these squares and triangles to get area of
the irregular shape.
Select one:

True

False 

Feedback
The correct answer is 'True'.

When 1vsd < 1 it is called forward or direct vernier.

Select one:

True 

False
Feedback
The correct answer is 'True'.

Question 25
Correct

Mark 1.00 out of 1.00

Flag question

Question text
It is a curve traced by a point moving such that the sum of its distances from the two fixed
points, foci is constant and equal to the major axis.
Select one:

a. Cube

b. None of the choices

c. Cone

d. Ellipse 

Feedback
Your answer is correct.

The correct answer is: Ellipse

Question 26
Correct

Mark 1.00 out of 1.00

Flag question

Question text
A curve consists of a lead bar inside rubber which bends conveniently to draw a smooth
curve through any set of points.
Select one:

a. Set of Scales

b. None of the choices

c. Both flexible curve and set of scales

d. Flexible curve 

Feedback
Your answer is correct.

The correct answer is: Flexible curve

Question 27
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Which instruments and other aids are not used in draughting work?
Select one:

a. Instrument Box

b. Pencils

c. French curves

d. None of the choices 

Feedback
Your answer is correct.

The correct answer is: None of the choices


Question 28
Correct

Mark 1.00 out of 1.00

Flag question

Question text
It is formed when a right-angled triangle with an apex and angle Θ is rotated about its
altitude as the axis. The length or height is equal to the altitude of the triangle and the
radius of the base is equal to the base of the triangle.

Select one:

a. None of the choices

b. Cube

c. Circle

d. Cone 

Feedback
Your answer is correct.

The correct answer is: Cone

Question 29
Correct

Mark 1.00 out of 1.00

Flag question

Question text
To drawn engineering drawing or map on a small piece of paper, we don't need scale.
Select one:

True

False 

Feedback
The correct answer is 'False'.

Question 30
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Engineering drawings are usually created in accordance with standardized conventions for
layout, nomenclature, interpretation, appearance, line styles, size, etc.
Select one:

True 

False

Feedback
The correct answer is 'True'.

A curve generated by a fixed point in the circumference of a circle when it rolls without
slipping along a fixed straight line or circular path.

Select one:

a. Parabolic Curve

b. Cycloidal Curves 

c. Epi-Cycloid and Hypo-Cycloid


d. Application of Conic Curves

Feedback
Your answer is correct.

The correct answer is: Cycloidal Curves

Question 32
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Means line thickness

Select one:

a. Both Line width and Line length

b. Line width 

c. Line length

d. Curve line

Feedback
Your answer is correct.

The correct answer is: Line width

Question 33
Correct

Mark 1.00 out of 1.00


Flag question

Question text
The least count (LC) is the smallest dimension correct to which a measurement can be made
with a vernier.

Select one:

True 

False

Feedback
The correct answer is 'True'.

Question 34
Correct

Mark 1.00 out of 1.00

Flag question

Question text
 It combines the functions of T-square, set-squares, scales and protractor. It is used for
drawing horizontal, vertical and inclined lines, parallel and perpendicular lines and for
measuring lines and angles.

Select one:

a. Mini-Draughter 

b. Pencils
c. Flexible curve

d. Set of Scales

Feedback
Your answer is correct.

The correct answer is: Mini-Draughter

Question 35
Incorrect

Mark 0.00 out of 1.00

Flag question

Question text
We can use compass and scale to draw triangle.
Select one:

True

False 

Feedback
The correct answer is 'True'.

Question 36
Correct

Mark 1.00 out of 1.00

Flag question

Question text
In regular practice, we need to measure irregular shapes of land, construction area, material
etc. Graphical method is used to calculate area of such irregular shapes.
Select one:
True 

False

Feedback
The correct answer is 'True'.

Question 37
Correct

Mark 1.00 out of 1.00

Flag question

Question text
It is drawn for the sectioned portion of an object. These are drawn inclined at an angle of45°
to the axis or to the main outline of the section.

Select one:

a. Break Lines: Type 01.1 (Continuous Narrow Lines With Zigzags)

b. Hatching / Section Lines: Type 01.1 (Continuous Narrow Lines) 

c. Guide Lines: Type 01.1 (Continuous Narrow Lines)

d. Construction Lines: Type 01.1 (Continuous narrow Lines)

Feedback
Your answer is correct.

The correct answer is: Hatching / Section Lines: Type 01.1 (Continuous Narrow Lines)

A hyperbola is a curve generated by a point moving such that the difference of its distances
from two fixed points called _____ is always constant and equal to the distance between the
vertices of the two branches of hyperbola.

Select one:
a. parabola

b. None of the choices

c. foci 

d. hyper

Feedback
Your answer is correct.

The correct answer is: foci

Question 39
Correct

Mark 1.00 out of 1.00

Flag question

Question text
It is a two-dimensional representation of three-dimensional objects. In general, it provides
necessary information about the shape, size, surface quality, material, manufacturing
process, etc., of the object.

Select one:

a. Engineering Drawing 

b. Engineering Management

c. None of the choices

d. Computer Engineering

Feedback
Your answer is correct.

The correct answer is: Engineering Drawing


Question 40
Correct

Mark 1.00 out of 1.00

Flag question

Question text
 Pencils for visible outlines, visible edges and boundary lines.

Select one:

a. H medium grade 

b. 2H hard grade

c. HB soft grade    

d. None of the choices

Feedback
Your answer is correct.

The correct answer is: H medium grade

Question 41
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Which instrument are not included in Instruments Box?
Select one:

a. None of the choices 

b. Dividers

c. Inking pens

d. Compasses

Feedback
Your answer is correct.

The correct answer is: None of the choices

Question 42
Correct

Mark 1.00 out of 1.00

Flag question

Question text
Objects which are very big in size can be represented in drawing to full size.

Select one:

True

False 

Feedback
The correct answer is 'False'.

Quadrilateral has four sides.


Select one:
True 

False

Feedback
The correct answer is 'True'.

Question 44
Correct

Mark 1.00 out of 1.00

Flag question

Question text
To communicate electric connections, position of switches and load, polarities etc electric
circuit diagram is very necessary.
Select one:

True 

False

Feedback
The correct answer is 'True'.

Question 45
Incorrect

Mark 0.00 out of 1.00

Flag question

Question text
Hexagon has seven sides.
Select one:

True 
False

Feedback
The correct answer is 'False'.

Question 46
Correct

Mark 1.00 out of 1.00

Flag question

Question text
When 1 vsd> 1 or (1+ lin), It is called backward or retrograde Vernier.

Select one:

True 

False

Feedback
The correct answer is 'True'.

Question 47
Correct

Mark 1.00 out of 1.00

Flag question

Question text
The Vernier scale is a long auxiliary scale constructed along the plain or main scale, which
can read up to two decimal places.
Select one:
True

False 

Feedback
The correct answer is 'False'.

Question 48
Correct

Mark 1.00 out of 1.00

Flag question

Question text
These are provided through the distances between the surfaces, location of holes, nature of
surface finish, type of material, etc. The expression of these features on a drawing, using
lines, symbols, figures and notes is called ___________.

Select one:

a. None of the choices

b. Line width

c. Line length

d. dimensioning 

Feedback
Your answer is correct.

The correct answer is: dimensioning

Question 49
Correct

Mark 1.00 out of 1.00


Flag question

Question text
Diagonal scales are used to represent either three units of measurements such as metres,
decimetres, centimetres or to read to the accuracy correct to two decimals.

Select one:

True 

False

Feedback
The correct answer is 'True'.

Question 50
Correct

Mark 1.00 out of 1.00

Flag question

Question text
It should be used only where the possible accumulation of tolerances does not endanger
the fundamental requirement of the component.

Select one:

a. None of the choices

b. Chain dimensioning 

c. Parallel dimensioning
d. Curve line

Feedback
Your answer is correct.

The correct answer is: Chain dimensioning

KYLA SABORBORO

Vous aimerez peut-être aussi