Vous êtes sur la page 1sur 2

LIST OF INSPECTION / TEST FACILITY

AT
AIRCRAFT RESEARCH & DESIGN CENTRE, BANGALORE

Sl. Test facility / Name of the Make Range / Accuracy Remarks


No. Parameters Equipment (Year of
Installation)
01 To inspect metallic raw Ultrasonic Immersion Blue Star, India 2 Mtr x 1 Mtr 2001
material below 25 mm testing Eqpt.
02 To measure dust in clean Dust Particle Counter Met-One, USA 0.3, 0.5, 0.7, 1.0, 2.0, 5.0- 2001
room area. micron size
03 To carry out a scan of FC USD – 10 Ultrasonic Eqpt. Kraut-Kramer, Thickness of steel from 0 to 1989
& Metallic parts Germany 10 Mtr
04 To carry out tension, Universal Testing machine Instron, UK Capacity 200 KN 1992
compression & CFC
specimens
05 To carry out mechanical High Temperature Instron, UK Ambiant to 330 C 2000
testing at elevated Chamber
temperature
06 Dimensions & contour CMM Polio, SPA, Italy X : 7 mt 2001
dimensions Y : 1.5 mt
Z : 1.5 mt
Acc : 10 + L/200
07 Thermal properties of DSC Metlon, Germany -20 C to +750 C 1989
composite material
08 To inspect small Profile Projector Nikon, Japan 100 x 200 mm 1987
components magnification 0.001 mm accuracy
upto 100X is possible
09 To inspect contours, Co-Ordinate Measuring Leitz, West 1200 x 1000 x 600 mm 1990
complex dimensions Machine germany
10 To inspect large Layout marking Machine Fujioka, Japan 0.1 mm accuracy 1986
components, master 2.5 x 1.5 x 2.0 mts
models etc
11 To check UV/ visible light Digital UV Intensity Meter Spectronics 0 – 19,990 Uw / cm2 2001
intensity corporation, USA
12 FOD’s, debomd between X – Ray Fluoroscopic Eqpt Yxlon, denmark 150 KV 2002
core & edge members, 180Ma
nodal debonds.
13 Delaminations & debonds C – Scan Vivasonic (P) Ltd. 3 m size To be
commissioned
Sl. Test Facilities / Name Make Range / Accuracy Remarks
No. Parameters (Year of
Installation)
14 Laminate quality, debonds Stavely Ultrasonic Wqpt. Stavely, UK 50 mm 2001
& delaminations
15 A-Scan of composite USI P12 Kraut – Kramer, 50 mm 1980
curved parts Germany
16 Cross – Section CT-scan Ge Wipro 500 mm 1999
examination of complex
composite parts like torque
plate, Blade.
17 Testing at RT and elevated Universal Testing Machine Model 6027 20 TON upto 250C 1990
temperature Instron
18 Axial Fatigue Universal Test Machine Schenck 250 KN 1987
19 Temperature, humidity Environmental Chambers CM EQPT +200C to -80C, 95% RH 1995
20 Proving Rings Precision Load Calibration Morehouse 250 KN 1997
Machine
21 Moisture ageing Environment Chamber Heraeus Votsch -80C to 180C 1990
22 Salt Spray testing Salt spray Chamber Heraeus Votsch RT to 70 C 1990
23 Heat change wrt Differential Scanning T A Instruments -100C to 725C 1992
temperature Calorimeter
24 Flexural & storage Dynamic Mechanical -do- -100C to 500C 1992
modulus wrt temperature Analyser
25 Dimension change wrt Thermo Mechanical -do- RT to 1000C 1992
temperature Analyser
26 Weight change wrt Thermo Gravimetric -do- RT to 1000C 1992
temperature Analyser
27 Dielectric strength wrt Dielectric Analyser -do- RT to 500C 1994
temperature
28 Constituents of organic High performance Liquid Waters RT to 100C 1994
mixtures Chromatography
29 Purification of water Water purification system MILLI-Q 1018 Megaohm-cm 1994
Millipore
30 Magnification Compound Stereo Salvos 120 X 1994
Microscope
31 Infrared spectrum Infrared Model 882 400nm to 4000nm 1997
Spectrophotometer Perkin Elmer
32 Viscosity Rotary Viscometer Contraves 1 cp to 106 cp 1997
33 Adhesion tensile testing Adhesion tester Patti – 2A 1 – 10000 psi 1998
SEM-Micro

Vous aimerez peut-être aussi