Académique Documents
Professionnel Documents
Culture Documents
Scope
The aim of this document is to highlight the important changes for offshore sections according to
EN10225-2:2019 edition.
Background
Date of release: 23/05/2019
Mandatory from 01/12/2019
Delivery condition
According to EN10225:2009, sections can be delivered in As-rolled condition.
EN10225-2:2019 does not allow this anymore. All sections with L specified in the steel designation shall
undergo a Charpy impact test @ –40 °C.
There are several other minor changes in mechanical properties requirements. Below table illustrates
the comparison between the old and new editions.
≤16mm
>16 ≤ 25mm
460-620 470-630 500-690 500-660 530-720 520-700
>25 ≤ 40mm
>40 ≤ 63mm
Temp (°C) Minimum Average/ Single Charpy impact test value [J]
-40 L/T 50J /35J L/T 60J /42J L/T 50J /35J L/TL 60J /42J L/T 50J /35J
≤16mm
>16 ≤ 25mm
0,87 0,90 0,90
>25 ≤ 40mm
>40 ≤ 63mm
S355G11+M S355MLO S355G12+M S355ML1O S420G3+M S420MLO S420G4+M S420ML1O S460G3+M S460MLO S460G4+M S460ML1O
Mo 0,08 0,08 0,08 0,25 0,08 0,25 0,08 0,25 0,08 0,25
EN10225:2009 EN10225-2:2019
Changes in Options:
Option numbers are changed in EN10225-2:2019 edition. Please refer to Section 12 of EN10225-2:2019
for the new optional requirements.
EN10225:2009 EN10225:2019
Group 2 S355G11 X
Group 2 S355G11+N S355NLO
Group 2 S355G11+M S355MLO
Group 3 S355G12 X
Group 3 S355G12+N S355NL1O
Group 3 S355G12+M S355ML1O
Group 2 S420G3 X
Group 2 S420G3+M S420MLO
Group 3 S420G4 X
Group 3 S420G4+M S420ML1O
Group 2 S460G3 X
Group 2 S460G3+M S460MLO
Group 3 S460G4 X
Group 3 S460G4+M S460ML1O