Académique Documents
Professionnel Documents
Culture Documents
Blu-ray Discs support the highest quality HD video Depending on what is contained on the Blu-ray
available in the industry - Large capacity means Disc, you may be able to select different font
no compromise on video quality. Furthermore, a styles, sizes and colours for the subtitles. Subtitles
Blu-ray Disc has the same familiar size and look may also be animated, scrolled or faded in and
as a DVD. out.
Interactivity
Certain Blu-ray Discs may contain Animated
menus and Trivia games.
English
02
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
Safety Information
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage” CAUTION: TO REDUCE THE RISK OF ELECTRIC This symbol indicates important instructions
inside the product that presents a risk of SHOCK, DO NOT REMOVE COVER (OR BACK) accompanying the product.
electric shock or personal injury. NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Do not install this equipment in a confined space Never use the plug with the fuse cover omitted
such as a bookcase or similar unit. if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
WARNING the pin face of the plug. Replacement covers are
available from your dealer.
To prevent damage which may result in fire
If the fitted plug is not suitable for the power points
or electric shock hazard, do not expose this
in your house or the cable is not long enough to
appliance to rain or moisture.
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
CAUTION dealer for assistance.
Blu-ray Disc Player USES AN INVISIBLE LASER However, if there is no alternative to cutting off the
BEAM WHICH CAN CAUSE HAZARDOUS plug, remove the fuse and then safely dispose of
RADIATION EXPOSURE IF DIRECTED. BE SURE the plug. Do not connect the plug to a mains jack,
TO OPERATE Blu-ray Disc Player CORRECTLY as there is a risk of shock hazard from the bared
AS INSTRUCTED. flexible cord.
To disconnect the apparatus from the mains, the
CAUTION plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR The product unit accompanying this user manual
PERFORMANCE OF PROCEDURES OTHER is licenced under certain intellectual property
THAN THOSE SPECIFIED HEREIN MAY RESULT rights of certain third parties. This licence is limited
IN HAZARDOUS RADIATION EXPOSURE. DO to private non-commercial use by end-user
NOT OPEN COVERS AND DO NOT REPAIR consumers for licenced contents.
YOURSELF. REFER SERVICING TO QUALIFIED No rights are granted for commercial use.
PERSONNEL. The licence does not cover any product unit other
This product satisfies CE regulations when than this product unit and the licence does not
shielded cables and connectors are used to extend to any unlicenced product unit or process
connect the unit to other equipment. To prevent conforming to ISO/IEC 11172-3 or ISO/IEC
electromagnetic interference with electric 13818-3 used or sold in combination with this
appliances, such as radios and televisions, use product unit. The licence only covers the use
shielded cables and connectors for connections. of this product unit to encode and/or decode
audio files conforming to the ISO/IEC 11172-3 or
IMPORTANT NOTE ISO/IEC 13818-3. No rights are granted under this
licence for product features or functions that do
The mains lead on this equipment is supplied with not conform to the ISO/IEC 11172-3 or ISO/IEC
a molded plug incorporating a fuse. The value of 13818-3.
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
English
English
02
product after use.
Be careful not to damage the disc because the
• Disconnect the AC power cord from the AC
Safety Information
data on these discs is highly vulnerable to the
outlet when you don’t intend to use the product
environment.
for long periods of time.
• Do not keep under direct sunlight.
• To clean a disc, wipe it in a straight
• Keep in a cool ventilated area. line from the inside to the outside of
• Store vertically. the disc.
• Keep in a clean protection jacket. • Do not expose the product to any
• If you move your product suddenly from a cold liquid.
place to a warm place, condensation may • When the AC plug is connected to a wall outlet,
generate on the operating parts and lens and the product will still draw power (standby mode)
cause abnormal disc playback. If this occurs, when it is turned off.
wait for two hours before connecting the plug to • Apparatus shall not be exposed to dripping or
the power outlet. splashing and no objects filled with liquids, such
Then insert the disc and try to play back again. as vases, shall be placed on the apparatus.
• The main plug is used as a disconnect device
Handling Cautions and shall stay readily operable at any time.
• Do not write on the printed side with a ball-point
pen or pencil. Maintenance of Cabinet
• Do not use record cleaning sprays or antistatic. For safety reasons, be sure to disconnect the AC
Also, do not use volatile chemicals, such as power cord from the AC outlet.
benzene or thinner.
• Do not use benzene, thinner, or other solvents
• Do not apply labels or stickers to discs. (Do not for cleaning.
use discs fixed with exposed tape adhesive or
• Wipe the cabinet with a soft cloth.
leftover peeled-off stickers.)
• Do not use scratch-proof protectors or covers. Restrictions on Playback
• Do not use discs printed with label printers
available on the market. • This product may not respond to all operating
• Do not load warped or cracked discs. commands because some Blu-ray, DVD and
• Before connecting other components to this CD discs allow specific or limited operation and
product, be sure to turn them all off. features during playback.
Please note that this is not a defect in the
• Do not move the product while a disc is being
product.
played as the disc may be scratched or broken,
or the product’s internal parts may be damaged. • Samsung cannot assure that this product will
play every disc bearing the Blu-ray Disc, DVD
• Do not put a flower vase filled with water or any
or CD logo because disc formats evolve, and
small metal objects on the product.
problems and errors may occur during the
• Be careful not to put your hand into the disc creation of Blu-ray Disc, DVD, CD software
tray. and/or the manufacture of discs.
• Do not place anything other than the disc in the Please contact the SAMSUNG customer care
disc tray. center if you have questions or encounter
• Exterior interferences such as lightning and difficulty in playing Blu-ray, DVD, or CD discs
static electricity can affect the normal operation in this product. Also, refer to rest of this user
of this product. If this occurs, turn the product manual for additional information on playback
off and on again with the POWER button, or restrictions.
disconnect and then reconnect the AC power
cord to the AC power outlet. The product will
operate normally.
English
Connections 20 Connecting to a TV
20 Case 1 : Connecting to a TV with an HDMI Cable
- Best Quality (Recommended)
21 Case 2 : Connecting to a TV with DVI Cable
- Best Quality (Recommended)
22 Case 3 : Connecting to a TV (Component)
- Better Quality
23 Case 4 : Connecting to a TV (Video)
- Good Quality
English
ENGLISH
24 Case 1 : Connecting to an Audio System
(HDMI Supported Amplifier) - Best Quality
(Recommended)
25 Case 2 : Connecting to an Audio System
(7.1 Channel Amplifier) - Better Quality
26 Case 3 : Connecting to an Audio System
(Dolby Digital, DTS Amplifier) - Better Quality
26 Case 4 : Connecting to an Audio System
(2 Channel Amplifier) - Good Quality
27 Connecting to the Network
27 Cable Network
28 Wireless Network
English
English
ENGLISH
48 Buttons on the Remote Control used for Music
Playback
49 Playing an Audio CD (CD-DA)/MP3
49 Repeat an Audio CD (CD-DA)/MP3
49 Playlist
50 Playing back a Picture
50 Playing a JPEG Disc
50 Using the TOOLS button
51 Playing back a USB Storage Device
Appendix 58 Troubleshooting
61 Index
62 Specifications
63 Compliance and Compatibility Notice
63 Copy Protection
64 Network Service Disclaimer
65 License
English
BD-RE/-R � This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.
DVD-RW(V)
DVD-R
This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R
discs that have been recorded and finalized.
DVD+RW �
DVD+R
MP3 This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage
WMA
- � media containing MP3 or WMA contents.
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage
JPEG - G media containing JPEG contents.
DivX
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage
MKV - � media containing DivX, MKV, MP4 contents.
MP4
✎ NOTE
▪ The product may not play certain CD-RW/-R and DVD-R due to the disc type or recording conditions.
▪ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Disc types that cannot be played
• HD DVD • DVD-RAM • DVD-RW(VR mode) • 3.9 GB DVD-R Disc for
• DVD-ROM/PD/MV- • Super Audio CD • CVD/CD-ROM/CDV/ Authoring.
Disc, etc (except CD layer) CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
10 English
03
▪ Some commercial discs and DVD discs purchased
outside your region may not be playable with this
BD-ROM
Getting Started
product. When these discs are played, either “This
disc can not be played.” or “Cannot read this disc. This Blu-ray disc can only be played back.
Please check the regional code of the disc.” will be This product can play back pre-recorded
displayed.
commercial BD-ROM discs.
▪ Playback may not work for some types of discs, or
when specific operations, such as angle change and BD-RE/-R
aspect ratio adjustment, are being performed.
Information about the discs is written in detail on the This Blu-ray disc can be recorded and played
disc box. Please refer to this if necessary. back.
This product can play back a BD-RE/-R disc
▪ Do not allow the disc to become dirty or scratched.
recorded by other compatible Blu-ray disc
Fingerprints, dirt, dust, scratches or deposits of
cigarette smoke on the recording surface may make recorders.
it impossible to use the disc for playback.
DVD-VIDEO
▪ When a BD-J title is played, loading may take longer
than a normal title, or some functions may perform • This product can play back pre-recorded
slowly. commercial DVD discs (DVD-VIDEO discs) with
movies.
▪ This product may not respond to all operating
• When switching from the first layer to the
commands because some Blu-ray, DVD and CD
discs allow specific or limited operation and features second layer of a dual-layered DVD-VIDEO disc,
during playback. there may be momentary distortion in the image
Please note that this is not a defect in the product. and sound. This is not a malfunction of the
product.
▪ Samsung cannot assure that this product will play
every disc bearing the Blu-ray Disc, DVD or CD logo DVD-RW
because disc formats evolve, and problems and
errors may occur during the creation of Blu-ray Disc, This product can play back a DVD-RW disc
DVD, CD software and/or the manufacture of discs. recorded and finalized with a DVD video recorder.
Please contact the SAMSUNG customer care centre Ability to play back may depend on recording
if you have questions or encounter difficulty when conditions.
playing Blu-ray, DVD, or CD discs in this product.
Also, refer to rest of this user manual for additional DVD-R
information on playback restrictions. This product can play back a DVD-R disc
recorded and finalized with a DVD Video recorder.
Blu-ray Disc Compatibility Ability to play back may depend on recording
conditions.
Blu-ray Disc is a new and evolving format.
Accordingly, disc compatibility issues are possible. DVD+RW
Not all discs are compatible and not every disc will
play back. For additional information, refer to the • This product can play back a DVD+RW disc
Compliance and Compatibility Notice section of recorded with a DVD Video recorder. Ability to
this user manual. play back may depend on recording conditions.
English 11
12 English
03
Both the product and the discs are coded by
File Audio
Getting Started
Container Support Range region. These regional codes must match in order
Extension Codec
to play the disc. If the codes do not match, the
*.mp3 MP3 MP3 - disc will not play.
Compliant with The Region Number for this product is described
WMA version 10 on the rear panel of the product.
* Sampling rates (in Region
kHz) - 8, 11, 16, Disc Type Area
*.wma WMA WMA Code
22, 32, 44.1, 48
* Bit rates - All bit- North America, Central America,
rates in the range
5kbps to 384kbps
a South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
AVCHD (Advanced Video Codec High Blu-ray Europe, Greenland, French
Definition) b territories, Middle East, Africa,
Australia and New Zealand.
• This product can playback AVCHD format
c
discs. These discs are normally recorded and India, China, Russia, Central
used in camcorders. and South Asia.
• The AVCHD format is a high definition digital
video camera format. The U.S., U.S. territories and
• The MPEG-4 AVC/H.264 format is capable of 1 Canada
compressing images at higher efficiency than
that of the conventional image compressing Europe, Japan, the Middle East,
format. 2 Egypt, South Africa, Greenland
• Some AVCHD discs use the “x.v.Color” format.
Taiwan, Korea, the Philippines,
• This product can playback AVCHD discs using
“x.v.Color” format.
3 Indonesia, Hong Kong
• “x.v.Color” is a trademark of Sony Corporation. Mexico, South America,
DVD-VIDEO
• “AVCHD” and the AVCHD logo are trademarks Central America, Australia,
of Matsushita Electronic Industrial Co., Ltd. and 4 New Zealand, Pacific Islands,
Sony Corporation. Caribbean
✎ NOTE Russia, Eastern Europe, India,
▪ Some AVCHD format discs may not play, depending 5 most of Africa, North Korea,
on the recording condition. Mongolia
AVCHD format discs need to be finalized.
▪ “x.v.Color” offers a wider colour range than normal
6 China
DVD camcorder discs.
▪ Some DivX, MKV and MP4 format discs may not
play, depending on the video resolution and frame
rate condition.
Copyright
© 2010 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
English 13
Accessories
TV
POWER POWER
BONUSVIEW SOURCE
SUBTITLE AUDIO
POPUP
TOOLS INFO
RETURN EXIT
79
MUTE
VOL CH
AK59-00104R
14 English
03
a
Getting Started
b c def g
h
1 DISC TRAY Opens to accept a disc.
8
A USB memory flash stick can be connected here and used as storage when
USB HOST connected to BD-LIVE. It can also be used for software upgrades and MP3/JPEG/
DivX/MKV/MP4 playback.
✎ NOTE
▪ Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.
▪ A USB device consuming more than 500mA requires a separate power supply device for normal operation.
▪ A USB HDD device cannot be used for BD Data storage (BD-LIVE).
English 15
a b
16 English
03
Getting Started
a b c d e
g f
1 LAN
Can be used for network based services (See pages 52~57), BD-LIVE and software
upgrades using a network connection.
2 HDMI OUT
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal
on your TV for the best quality picture or to your Receiver for the best quality sound.
6 VIDEO OUT Connects the input of external equipment using a video cable.
7 AUDIO OUT Connects to the audio input of external equipment using audio cables.
English 17
TV
POWER POWER
Turn the product on and off. Turn the TV on and off.
(To operate your TV, please refer to page 19)
To open and close the disc tray. BONUSVIEW SOURCE
Press this to use Bonusview function. After setup, allows you to set the input
source on your TV.
Press this to switch the Blu-ray Disc/DVD’s SUBTITLE AUDIO Use this to access various audio functions
subtitle language. on a disc (Blu-ray Disc/DVD).
AK59-00104R
Mutes the speakers of your TV. Use this to select a TV program.
Installing batteries
✎ NOTE
▪ If the remote does not operate properly :
• Check the polarity +/– of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
! CAUTION
▪ The rechargeable battery incorportabed in this
product is not user replaceable. For the information
on its replacement, go to your service provider.
18 English
03
You can control certain functions of your TV with
Brand Code Brand Code
Getting Started
this remote control.
TV POWER+01, +02, NOBLEX TV POWER+66
Button Function SAMSUNG +03, +04, +05, NOKIA TV POWER+74
+06, +07, +08, +09
TV POWER Used to switch the television on and off. NORDMENDE
TV POWER+72, +73,
AIWA TV POWER+82 +75
Used to select an external source
TV SOURCE PANASONIC
TV POWER+53, +54,
connected to the TV. TV POWER+10, +11, +74, +75
ANAM +12, +13, +14,
TV VOL (+/–) Used to adjust the volume of the television. +15, +16, +17, +18
PHILIPS
TV POWER+06, +55,
+56, +57
TV CH (,/.) Used to select the desired channel. BANG & OLUFSEN TV POWER+57
TV POWER+06, +56,
PHONOLA
BLAUPUNKT TV POWER+71 +57
TV MUTE Used to toggle the sound on and off.
BRANDT TV POWER+73 TV POWER+58, +59,
PIONEER
+73, +74
✎ NOTE BRIONVEGA TV POWER+57
CGE TV POWER+52 RADIOLA TV POWER+06, +56
▪ The functions listed above will not necessarily work
CONTINENTAL
on all televisions. If you encounter problems, operate EDISON
TV POWER+75 RADIOMARELLI TV POWER+57
3. Press and hold the TV POWER button and FORMENTI TV POWER+57 SCHNEIDER TV POWER+06
the brand of your television by pressing the GRADIENTE TV POWER+70 TV POWER+36, +37,
SHARP
appropriate number buttons. GRUNDIG
TV POWER+49, +52, +38, +39, +48
+71
If your television is compatible with the remote SIEMENS TV POWER+71
control, it will switch off. TV POWER+60, +72,
HITACHI SINGER TV POWER+57
+73, +75
It is now programmed to operate with the SINUDYNE TV POWER+57
IMPERIAL TV POWER+52
remote control.
JVC TV POWER+61, +79 SONY TV POWER+35, +48
✎ NOTE LG
TV POWER+06, +19, TELEAVA TV POWER+73
▪ If several codes are listed for your television brand, +20, +21, +22, +78
TELEFUNKEN
TV POWER+67, +73,
+75, +76
try each one in turn until you find one that works. LOEWE TV POWER+06, +69
LOEWE OPTA TV POWER+06, +57 TV POWER+72, +73,
▪ If you replace the remote control’s batteries, you THOMSON
+75
must set the brand code again. MAGNAVOX TV POWER+40
THOMSON ASIA TV POWER+80, +81
METZ TV POWER+57
TV POWER+06, +48, TV POWER+47, +48,
MITSUBISHI TOSHIBA
+62, +65 +49, +50, +51, +52
English 19
HDMI cable
(not included)
✎ NOTE
▪ An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
▪ If the product is connected to your TV in HDMI 720p, 1080i, 1080p output mode, you must use a High
speed(category2) HDMI cable.
▪ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
▪ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
▪ When you connect the product to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest supported by the TV.
20 English
04
(Recommended)
Connections
1. Using an HDMI-DVI cable, connect the HDMI OUT terminal on the rear of the product to the DVI IN
terminal of your TV.
2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the
product to the AUDIO IN (red and white) terminals of your TV.
3. Turn on the product and TV.
4. Press the input selector on your TV remote control until the DVI signal from the product appears on
your TV screen.
• If you have set the remote control to operate your TV (See page 19), press the TV SOURCE
button on the remote control and select HDMI as the external source of the TV.
HDMI-DVI cable
Audio cable
(not included)
Red White
✎ NOTE
▪ HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content
Protection), random noise appears on the screen.
▪ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
▪ When you connect the product to the TV using the HDMI-DVI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest supported by the TV.
English 21
Component cable
Audio cable (not included)
✎ NOTE
▪ Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”
instead of “PB, PR, Y”. The number and position of terminals may vary depending on the TV set.
Please refer to the user manual of your TV.
▪ You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 576p/480p, 576i/480i,
depending on the disc type. (See pages 31~32)
▪ The actual resolution may differ from the setting in the setup menu if both Component and HDMI cables are connected.
The resolution may also be different depending on the disc. (See pages 31~32)
▪ In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i or
720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu.
The resolution is actually 576i/480i.
22 English
04
1. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)
Connections
terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals
of your TV.
2. Turn on the product and TV.
3. Press the input selector on your TV remote control until the “VIDEO” signal from the product appears
on the TV screen.
• If you have set the remote control to operate your TV (See page 19), press the TV SOURCE
button on the remote control and select VIDEO as the external source of the TV.
Audio/Video cable
✎ NOTE
▪ Noise may be generated if the audio cable is placed too close to the power cable.
▪ If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~26)
▪ The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.
▪ If there is only one audio input terminal on the TV, connect it to the AUDIO OUT(right/white) terminal of the product.
English 23
• Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
• Please set the audio in the menu screen according to the Amplifier. (See pages 33~35)
• The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user manual
of your Amplifier.
HDMI cable
(not included)
HDMI cable
(not included)
24 English
04
- Better Quality
Connections
1. Using the 7.1CH audio cables, connect the 7.1CH ANALOG AUDIO OUT terminals on the rear of
the product to the 7.1CH ANALOG AUDIO IN terminals of your Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the
rear of the product to the HDMI, COMPONENT or VIDEO IN terminal of your TV. (See pages 20~23)
3. Turn on the product, TV and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from
the product. Refer to your Amplifier’s user manual to set the Amplifier’s audio input.
✎ NOTE
▪ The front left and right outputs on your product and 7.1 channel amplifier must be connected to hear disc menu audio
from certain Blu-ray discs.
▪ When you connecting the 7.1CH ANALOG AUDIO OUT terminals using 7.1CH audio cables, it is recommended to set
the Digital Output to PCM. (See page 33)
▪ When connecting to a 5.1 channel home theatre or receiver, connect all the Analogue Audio output jacks from the
product except for the Surround Back Left/Surround Back Right outputs.
English 25
Case 3 :
Optical cable Case 4 : Audio cable
(not included)
Red White
✎ NOTE
▪ When following the case 3 connection, discs with PCM audio soundtracks will only be heard over the front two
channels.
26 English
04
This product enables you to view network based services (See pages 52~57) such as Internet@TV and
Connections
BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend
using an AP (Access Point) or IP router for the connection. For more information on router connection,
refer to the user manual of the router or contact the router manufacturer for technical assistance.
Cable Network
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN
terminal of your modem.
2. Set the network options. (See pages 37~41)
Router
Or
Broadband modem
(with integrated router) Broadband modem
Broadband Broadband
service service
✎ NOTE
▪ Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the ISP’s
policy. For more information, contact your ISP (Internet Service Provider).
▪ For DSL users, please use a router to make a network connection.
▪ For the AllShare function, a PC must be connected in the network as shown in the figure.
English 27
Broadband
service
Wireless IP sharer
✎ NOTE
▪ To use a wireless network, your product must be connected to a wireless IP sharer. If the wireless IP sharer supports
DHCP, your product can use a DHCP or static IP address to connect to the wireless network.
▪ This product supports IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play the video over IEEE 802.11B/G
connection, the video may not be played smoothly.
▪ Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
▪ If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, this product will not support a connection in compliance with new Wi-Fi certification
specifications.
▪ If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)
or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
▪ Connection Methods : You can setup the wireless network connection 3 ways.
- PBC (WPS)
- Auto Setup (Using the Auto Network Search function)
- Manual Setup
▪ Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,
obstacles, interference by other radio devices, etc).
▪ Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
▪ When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, AES
▪ For the AllShare function, a PC must be connected in the network as shown in the figure.
28 English
05
desired Network Settings: Wired, Wireless or
1. Turn on your TV after connecting the product. PBC (WPS), then press the ENTER button.
Setup
(When the product is connected to TV for the (See pages 38~41)
first time, product will turn on automatically and The Network Test will start and Initial Settings
the Initial Settings screen will be displayed.) will be completed.
6. Press the OK button.
Initial Settings I On-Screen Language The home menu will be displayed. (For more
information about home menu, please see
Select a language for the on-screen displays.
page 30)
English
Français
• Home Menu
Deutsch
Español
Italiano
Nederlands
Please activate Internet@TV
internet radio service
You Tube
to enjoy a variety of Internet Services.
> Move " Select
Initial Settings
✎ NOTE
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
▪ When the product is connected to TV for the first
time, product will turn on automatically.
Do not confuse because this is not malfunction.
▪ The home menu will not be displayed if you do not
Start configure the initial settings.
▪ If you press the BLUE(D) button during the network
a Previous " Select setup, you can access the home menu even if the
network setup is not completed yet.
Wired : Set the network by using Ethernet cable. If the TV uses a language supported by the product,
Please make sure that Ethernet cable is connected.
that language will be set to a preferred language
automatically.
However, the Anynet+(HDMI-CEC) feature should
Wired Wireless PBC (WPS)
English 29
Setup
POWER POWER
BONUSVIEW SOURCE
1 POPUP
30 English
05
displayed.
You can configure various display options such as In this case, you can’t see full screen by pressing
Setup
the TV Aspect, Resolution, etc. the FULL SCREEN button on the remote control.
English 31
• DVD playback
32 English
05
You can optimize the colour setting from the Set to output the picture from the HDMI OUT jack
Setup
HDMI output. with Deep Colour or not. Deep Colour allows more
Select a connected device Type. accurate colour reproduction with deeper colour
• TV : Select if connected to a TV via HDMI. depth.
• Monitor : Select if connected to a Monitor via • Auto : The picture will be output with Deep
HDMI. Colour to the connected TV which supports
HDMI Deep Colour.
• Off : The picture will be output without Deep
Movie Frame (24Fs) Colour.
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the product’s HDMI output to
Audio
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. This menu can Digital Output
only be selected in 1080i or 1080p HDMI output
resolution modes. Set Digital Output depending on the connected
• On : Movie Frame (24Fs) functions will work. receiver. (For more details, please refer to the
• Off : Movie Frame (24Fs) functions will not work. digital output selection on the next page)
• PCM
✎ NOTE • Bitstream(Re-encode)
▪ If your TV does not support Movie Frame (24Fs) • Bitstream(Audiophile)
function, the pop-up message will be displayed.
✎ NOTE
Progressive Mode ▪ Be sure to select the correct Digital Output or you
will hear no sound or a loud noise.
Set to improve picture quality when viewing DVDs.
▪ If the HDMI device (Receiver, TV) is not compatible
• Auto : Select this to have the product with compressed formats (Dolby digital, DTS), the
automatically set the best picture for the DVD audio signal outputs as PCM.
you’re watching.
• Video : Select for the best picture quality from
▪ Secondary and Effect audio will not be heard with
regular DVDs.
concert or TV show DVDs.
▪ Some Blu-ray Discs do not have Secondary and
Effect audio.
Still Mode ▪ This Digital Output setup does not effect the analogue
Set the type of picture shown when you pause (L/R) audio or HDMI audio output to your TV.
DVD playback. It effects the optical and HDMI audio output when
connected to a receiver.
• Auto : Automatically set the best still picture
depending on the content. ▪ If you play MPEG audio soundtracks, audio signal
• Frame : Select when pausing a scene with a outputs PCM regardless of Digital Output Selections
little action. (PCM or Bitstream).
• Field : Select when pausing a scene with a lot
of action.
English 33
Bitstream Bitstream
Setup PCM
(Re-encode) (Audiophile)
Connection HDMI Receiver Optical HDMI Receiver or Optical HDMI Receiver Optical
34 English
05
2-channel movie sound over multi-channels.
• If your TV is not compatible with compressed
• Music : Select this if you want to play 2-channel
Setup
multi-channel formats (Dolby Digital, DTS), the
music sound over multi-channels.
product may output PCM 2ch downmixed
audio even though you set Bitstream(either Re- ✎ NOTE
encode or Audiophile) on your setup menu. ▪ If you are using HDMI receiver, this option is
• If your TV is not compatible with PCM sampling available when you set Digital Output setup as PCM.
rates over 48kHz, the product may output
48kHz downsampled PCM audio even though
▪ You can use this option with analogue 7.1ch output
when you don’t use HDMI receiver.
you set PCM Downsampling to Off.
Speaker Setting
Dynamic Range Control
Set the speaker sound to obtain the best possible
You can listen at low volumes but still hear dialog surround sound.
clearly.
This menu is available only when using 7.1ch
This is only active when a Dolby Digital signal is
analogue output.
detected.
• On : When Movie soundtracks are played at low Settings
volume or from smaller speakers, the system
Display Speaker Setting
can apply appropriate compression to make Audio
low-level content more intelligible and prevent System
Front : Large
Center : Large
dramatic passages from getting too loud. Network Surround : Large
• Off : You can enjoy the movie with the standard Language
Security
Surround Back
Subwoofer
:
:
Large
On
Dynamic Range. General
Test Tone : Off
DTS Neo:6
You can enjoy multi-channel sound from a simple
2-channel audio source.
• Off : Outputs a 2-channel audio signal through
the front speakers only.
English 35
Anynet+(HDMI-CEC) Language
Security
Delete BD Data
Change Device : Internal Memory
\
General
Anynet+ is a convenient function that offers linked Support " Select ' Return
operations with other Samsung products with the Delete all BD data in the storage.
Anynet+ feature.
To operate this function, connect this product to a
Samsung TV with an HDMI cable.
Description of Device(Storage) Information on
You can operate this product using a Samsung the Product
TV remote control and start disc playback simply
• Total Size : Total size of the Device(Storage).
by pressing the PLAY ( ) button on the TV’s
• Available Size : Available size of the Device
remote control.
(Storage).
For more information, please see the TV user
manual. ✎ NOTE
• On : Anynet+ functions will work. ▪ In the external memory mode, disc playback will
• Off : Anynet+ function will not work. be stopped if you disconnect the USB device in the
middle of the playback.
✎ NOTE
▪ This function is not available if the HDMI cable does ▪ Only those USB devices formatted in FAT file system
(DOS 8.3 volume label) are supported, and it is
not support CEC.
recommended to use USB devices that support USB
▪ If your Samsung TV has an n logo, then it 2.0 protocol, 4 MB/sec or faster read/write speed.
supports the Anynet+ function.
▪ A USB HDD device cannot be used for BD Data
▪ Depending on your TV, certain HDMI output storage (BD-LIVE).
resolutions may not work.
Please refer to the user manual of your TV. ▪ The Resume Play function may not work after
formatting the storage device.
▪ The total size of BD Data Management may differ,
depending on the conditions.
36 English
05
Set time-related functions. Select this to get a new registration code.
Setup
Settings
Settings
Display Clock Display Initial Setting
Audio Clock Mode : Auto \ Audio Disc Menu :
System Clock Set System Audio :
Network Time Zone : GMT + 0:00 Network Subtitle :
Do you want to deactivate your device?
Language DST : Off Language
Security
Security Yes No
General
General
Support > Move " Enter ' Return
Support
Choose your preferred method of setting clock.
English 37
System
IP Address : 0 0 0 0 then press the ENTER button.
Subnet Mask : 0 0 0 0
Network
Gateway : 0 0 0 0 3. Press the ▼ button to go to the first entry field
Language
Security
DNS : Auto (IP Address).
DNS Server : 0 0 0 0
General
Support Settings
> Move " Select ' Return
Network Settings
Display
Internet Protocol Setup : Manual
Audio
\
IP Address : 0 0 0 0
System
Subnet Mask : 255 255 255 0
Network
2. After the Network Function has acquired the Language
Gateway : 0 0 0 0
38 English
05
10. Run a Network Test to ensure the product has - Auto Network Search
connected to your network (See page 41). Most wireless networks have an optional security
Setup
system that requires devices that access the
Wireless Network network to transmit an encrypted security code
called an Access or Security Key. The Security
You can setup the wireless network three ways: Key is based on a Pass Phrase, typically a word
• Using PBC (WPS) or a series of letters and numbers of a specified
• Using the Auto Network Search function. length you were asked to enter when you set up
• Manually. security for your wireless network. If you use this
Each method is described below. method of setting up the network connection, and
have a Security Key for your wireless network,
Setting Up the Wireless Network Connection you will have to enter the Pass Phrase during the
- PBC (WPS) setup process.
The easiest way to set up the wireless network Setting Up the Network Connection
connection is using the PBC (WPS) function. To set up the wireless connection using Auto
If your wireless router has a PBC (WPS) button, Network Search, follow these steps:
follow these steps:
1. In the Network Settings menu, press the ▲▼
1. In the Network Settings menu, press the ▲▼ buttons to select Network Settings, and then
buttons to select Network Settings, and then press the ENTER button.
press the ENTER button. The Internet Protocol Setup screen appears.
The Internet Protocol Setup screen appears.
2. Press the ▲▼ buttons to select the Internet
2. Press the RED(A) button on the remote Protocol Setup, and then press the ENTER
control. button.
3. Press the PBC (WPS) button on your router 3. Press the ▲▼ buttons to select Auto or
within two minutes. Your product displays the Manual, and then press the ENTER button.
Network Selection Screen, and automatically
4. If you selected Auto, press the ▲ button to
acquires all the network setting values it
go to Access Point Selection, and then
needs and connects to your network. When
press the ENTER button.
it is done, it displays an OK button. Press the
The Network function searches for available
Enter button on your remote.
wireless networks.
4. After the network connection is set up, press When done, it displays a list of the available
the Return button to exit the Network networks.
Setting screen.
Settings
English 39
7. Press the ▲▼ buttons to select PIN or If the Auto Setting does not work, you need to
Security. enter the Network settng values manually.
For most home networks, you would select To get the Network setting values from most
Security (for Security Key). Windows computers, follow these steps:
8. On the Security screen, enter your network’s 1. Right click the Network icon on the bottom
Pass Phrase. right of the screen.
✎ NOTE 2. In the pop-up menu, click Status.
▪ You should be able to find the Pass Phrase on one of 3. On the dialog that appears, click the Support
the set up screens you used to set up your router or tab.
modem. 4. On the Support tab, click the Details button.
9. To enter the Pass Phrase, follow these The Network settings are displayed.
general directions: To Enter the Network settings into your product,
• Press the number keys on your remote to follow these steps:
enter numbers.
1. On the Internet Protocol Setup screen, press
• Use the arrow keys on your remote to move the ENTER button.
from button to button on the Security Key
screen. 2. Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
• To enter letters, move to the button labelled
a/A/1/, and then press the ENTER button. 3. Press the ▼ button to go to the first entry field
Each time you press the ENTER button, (IP Address).
you change the kind of characters you can
Settings
enter (a/A/1/).
Network Settings
• To enter a letter, press the number button Display
Access Point Selection : Not Selected
Audio
\
that corresponds to the letter. Pressing the System
Internet Protocol Setup : Manual
40 English
05
Gateway values.
▪ What is a valid certificate?
7. Press the ▼ to go to DNS. When the product uses BD-LIVE to send the disc data
Setup
and a request to the server to certify the disc, the
8. Press the ▼ button to go to the first DNS server uses the transferred data to check if the disc is
entry field. Enter the numbers as above. valid and sends the certificate back to the product.
9. When done, press the ▲ button to return to ▪ The Internet connection may be restricted while you
Access Point Selection. Select the network, are using BD-LIVE contents.
and then press the ENTER button.
10. Go to Step 6 in the Automatic Wireless
procedure above, and follow the directions
from that point on. Language
Network Test You can select the language you prefer for home
menu, disc menu, etc.
Use this menu to connect the wired network • On-Screen Menu : Select the language for the
or check whether your network connection is on-screen displays.
working or not. • Disc Menu : Select the language for the disc
menu displays.
Settings • Audio : Select the language for disc audio.
• Subtitle : Select the language for disc subtitles.
Display Network Test
Audio
MAC Address (00:00:00:00:00:00)
✎ NOTE
System
Network
IP Address,Subnet Mask,Gateway,DNS Server ▪ The selected language will only appear if it is
Language
Gateway Ping supported on the disc.
Internet Service Test
Security
Network testing...
General
Support
Parental Rating
BD-LIVE Internet Connection
This function works in conjunction with Blu-ray
Set to allow internet connection when BD-LIVE Disc/DVDs that have been assigned a rating,
service is used. which helps you control the types of Blu-ray Disc/
• Allow (All) : The Internet connection will be DVDs that your family watches.
allowed for all BD-LIVE contents. Select the rating level you want to set.
• Allow (Valid Only) : The Internet connection will A larger number indicates that the program is
be allowed only for BD-LIVE contents containing intended for adult use only. For example, if you
a valid certificate. select up to Level 6, discs that contain Level 7, 8
• Prohibit : No Internet connection will be allowed will not play.
for any BD-LIVE content.
English 41
Front Display
Change Password Change the brightness of the front panel.
• Auto : Dim during playback.
Change the 4-digit password used to access • Dim : Dim the display window.
security functions.
• Bright : Brighten the display window.
If you forgot your password
Power On/Off Sound
1. Remove the disc.
Play a melody when the product is turned on and
2. Press and hold the STOP ( ) button on the
off.
front panel for 5 seconds or more.
All settings will revert to the factory settings. • On : Turn Power Sound On.
• Off : Turn Power Sound Off.
✎ NOTE
▪ When the factory default settings are restored, all Light Effect
the user data stored in the BD data will be deleted.
You can activate or deactivate the light effect on
the top of the product.
General • Always On : Activate Light Effect at all times.
Select this for retail display.
Background • Auto : Activate Light Effect when turning the
product on and off or when moving the tray.
Change the background theme of the menu screen. Select when installing the product in your home.
• Off : Turn Light Effect off at all times.
Settings
Background
Display
Audio Skin 1
System
Skin 2
Network
Skin 3
Language
Skin 4
Security
General Skin 5
Support
> Move " Select ' Return
42 English
05
ways as follows: Software update is the same as
in the By Internet menu.
Software Upgrade
Setup
• USB : Visit www.samsung.com/bluraysupport,
This menu allows you to upgrade software for then download and store the latest software
performance improvements or additional services. (RUF file) into a USB flash drive. Connect the
You can check the current software version, USB flash drive to the USB port of the product
upgrade using the internet and set the Auto (disc tray must be empty) to update the
upgrade notification. If the product is properly software, then follow the on-screen instructions.
connected to the network by cable or wirelessly, • CD/DVD : Visit www.samsung.com/
the product will automatically connect to bluraysupport, download and write the latest
Samsung’s website each time it is turned on and software (RUF file) onto a disc. Insert and play
download update files if any valid upgrade exists. the disc in the product to start the update, then
follow the on-screen instructions.
Settings
✎ NOTE
Display
Audio
Software Upgrade
Software
Disc Menu Upgrade :
▪ Software upgrades using the USB Host jack must be
System Current Version Audio : XXX-XXXXXXXXX
:
performed with no disc inside.
Network Subtitle
By Internet
:
▪ If you want to cancel the upgrade in the process of
downloading the upgrade data, press the ENTER
Language
\
Auto Upgrade Notification : On
Security
General button.
" Select ' Return
Support
▪ When the system upgrade is done, check the
software details in the software Upgrade menu.
▪ Do not turn off the product during the System
Upgrade, as it may cause the product to not work
1. To select By Internet, press the ENTER properly.
button.
A popup message will appear if an update is ▪ Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.
available.
2. If you select Yes, the product will turn off
automatically before restarting. Contact Samsung
(Never turn it on manually.)
Provide contact information for assistance with
3. The update progress popup will appear. your product.
When the update is completed, the product
will turn back off automatically.
4. Press the POWER button to turn on the
product.
✎ NOTE
▪ The Update will be completed when the product
turns off after restarting. Press the POWER button to
turn on the updated product for your use.
Never turn off or on the product manually during the
update process.
▪ Samsung Electronics shall take no legal responsibility
for product malfunction caused an unstable internet
connection or consumer negligence during software
upgrade.
English 43
• Audio CD (CD-DA)
Playing the Title List
track 1 track 2 track 3 track 4 track 5 z
• MP3, WMA, DivX, MKV and MP4 1. During playback, press the DISC
MENU or TITLE MENU button.
folder (group) 1 folder (group) 2
file 1 file 2 file 1 file 2 file 3 2. Press the ▲▼ buttons to select an
entry you want to play from Title List,
then press the ENTER button.
✎ NOTE
▪ If your disc has the playlist, press the GREEN(B)
button to go to the Playlist.
44 English
06
h hzZyx
Basic Functions
1. During playback, press the POPUP • During playback, press the SKIP ( )
MENU button on the remote control. button.
If you press the SKIP ( ) button, it moves to
2. Press the ▲▼◄► buttons or ENTER
the next chapter.
button to select the desired menu.
If you press the SKIP ( ) button, it moves to
✎ NOTE the beginning of the chapter. One more press
▪ Depending on the disc, the menu items may differ makes it move to the beginning of the previous
and this menu may not be available. chapter.
Using the Search and Skip Functions Slow Motion Play/Step Motion Play
During play, you can search quickly through a
chapter or track, and use the skip function to Slow Motion Play
jump to the next selection.
English 45
46 English
06
▪ Depending on the Blu-ray Disc / DVD, you may be
able to change the desired subtitle in the Disc Menu.
hzZx
Basic Functions
Press the DISC MENU button.
You can also operate this function by ▪ This function depends on what subtitles are encoded
pressing the AUDIO button on the on the disc and may not be available on all Blu-ray
remote control. Discs/DVDs.
▪ A Blu-ray Disc can contain up to 255 subtitle
1. During playback, press the TOOLS button. languages and a DVD up to 32.
2. Press the ▲▼ buttons to select Audio. ▪ Information about the primary / secondary mode
will also be displayed if the Blu-ray Disc has a
3. Press the ◄► buttons to select the desired
BONUSVIEW section.
audio language.
✎ NOTE ▪ This function changes both the primary and
secondary subtitles at the same time.
▪ The ◄► indicator will not be displayed on the ▪ The total number of subtitles is the sum of the
screen if the BONUSVIEW section does not contain
primary and secondary ones.
any BONUSVIEW audio settings.
▪ If you press the SUBTITLE button on the remote
▪ Information about the primary / secondary mode
control, the subtitle bar will be displayed.
will be also displayed if the Blu-ray Disc has a
Press the RETURN button to remove the subtitle bar.
BONUSVIEW section.
Use the ◄► button to switch between primary and
secondary audio modes. Changing the Camera Angle
▪ This function depends on what audio languages are
encoded on the disc and may not be available. hZ
▪ A Blu-ray Disc can contain up to 32 audio languages When a Blu-ray Disc/DVD contains multiple angles
and a DVD up to 8. of a particular scene, you can use the ANGLE
▪ Some Blu-ray Discs may allow you to select either function.
the multi-channel LPCM or Dolby digital audio 1. During playback, press the TOOLS button.
soundtrack in English.
2. Press the ▲▼ buttons to select Angle.
▪ If you press the AUDIO button on the remote control,
Audio bar will be displayed. 3. Press the ◄► buttons to select the desired
Press the RETURN button to remove the Audio bar. Angle.
hZx hzZy
This function enables you to adjust video quality
You can also operate this function by when you are connected to a TV via HDMI.
pressing the SUBTITLE button on the
1. During playback, press the TOOLS button.
remote control.
2. Press the ▲▼ buttons to select Picture Setting,
then press the ENTER button.
1. During playback, press the TOOLS button.
3. Press the ◄► buttons to select the desired
2. Press the ▲▼ buttons to select Subtitle. Picture Setting, then press the ENTER button.
3. Press the ◄► buttons to select the desired
subtitle language.
English 47
movies.
• User : The user can adjust the sharpness BONUSVIEW
BONUSVIEW SOURCE
SOURCE
Setting BONUSVIEW @
h !
SUBTITLE
SUBTITLE AUDIO
AUDIO
MUTE
SEARCH buttons
MUTE
▪ If you switch from BONUSVIEW Video, BONUSVIEW 3 PLAY button : Plays the currently selected track.
Audio will change automatically in accordance with
BONUSVIEW Video. ▲▼ buttons : Selects a track in the Music List or
4
Tools Playlist.
BONUSVIEW Video < Off > YELLOW(C) button : Select or deselect a track in
5
BONUSVIEW Audio : 0/1 Off the music list.
Picture Setting
< Change " Select REPEAT button : Selects the play mode in the
6
Playlist.
ENTER button : Plays and pauses the selected
7
track.
◄► buttons : Jump Play.
8
(except for Audio CD (CD-DA))
9 STOP button : Stops a track.
SKIP button : During playback, moves to the next
0 page in the Music List or moves to the next track in
the Playlist.
48 English
06
5
previous page in the Music List or moves to the
previous track in the Playlist. 6 Displays the current playback status
Basic Functions
If you press this button after three seconds of 7 Displays the repeated playback status.
!
playback in the Playlist, the current track will be
replayed from the beginning. But, if you press this 2. Press the ▲▼ buttons to select the track
button within three seconds after playback starts in you want to play, and then press the ENTER
the Playlist, the previous track will be played. button.
NUMBER buttons : During the Playlist playback,
@ press the desired track number. The selected track Repeat an Audio CD (CD-DA)/MP3
will be played.
1. During the Playlist playback, press the
REPEAT button.
Playing an Audio CD (CD-DA)/MP3 2. Select the desired play mode by
pressing the REPEAT button repeatedly.
1. Insert an Audio CD (CD-DA) or an MP3 Disc
into the disc tray. Tracks on a disc are
• For an Audio CD (CD-DA), the first track will Audio CD played in the order in
Off
be played automatically. (CD-DA)/MP3 which they were recorded
on the disc.
• For an MP3 disc, press the ◄► buttons
to select Music, then press the ENTER Audio CD
button. ( ) Track Current track is repeated.
(CD-DA)
( ) One MP3 Current track is repeated.
Audio CD (CD-DA)/MP3 Screen Elements
Audio CD
( ) All All tracks are repeated.
1 2 3 (CD-DA)/MP3
The random option plays
Playlist Audio CD
1/6
( ) Shuffle a disc’s track in random
TRACK 001 TRACK 001 (CD-DA)/MP3
05:57 order.
TRACK 002
04:27
TRACK 003
Playlist
04:07
7 TRACK 004
03:41
00:08 / 05:57
6 +
TRACK 005
03:17
TRACK 006
03:35
1. Insert an Audio CD (CD-DA) or an MP3 Disc
" Pause Tools ' Return
into the disc tray.
• For an Audio CD (CD-DA), the first track will
be played automatically.
5 4 • For an MP3 disc, press the ◄► buttons
to select Music, then press the ENTER
button.
1 Displays the music information.
2. To move to the Music List, press the STOP ( )
2 Displays the playlist. or RETURN button.
3 Display the current track/total tracks. The Music List screen is displayed.
English 49
button.
The Slide Show starts automatically.
4. If there is an undesired track in the playlist,
press the YELLOW(C) button again. ✎ NOTE
The selected track will be deleted. ▪ You can’t enlarge the subtitle and PG graphic in the
5. Press the ENTER button to play the selected full screen mode.
tracks.
Selected tract will automatically play.
Using the TOOLS button
Playlist 1/3
TRACK 001 TRACK 001
05:57
During the slide show playback, you
TRACK 002 can use various function by pressing the
TOOLS button.
04:27
TRACK 003
04:07
+ 00:08 / 05:57
Tools
Stop Slide Show
Slide Show Speed : Normal
" Pause Tools ' Return Background Music
Zoom
Rotate
Information
6. To go to the Music List, press the STOP ( ) > Move " Enter ' Return
or RETURN button.
7. To go to the Playlist, press the ENTER
button.
50 English
06
current picture. (Enlarged up to 4 times) press the ENTER button.
• Rotate : Select this if you to rotate the picture. 6. Press the ◄► buttons to select the desired
Basic Functions
(This will rotate the picture either clockwise or Videos, Music or Photos, then press the
counter clockwise.) ENTER button.
• Information : Shows the picture information 4-1. Press the BLUE(D) button.
including the name and size, etc.
✎ NOTE
▪ To enable the Background Music function, both Please activate Internet@TV service
to enjoy a variety of Internet Services.
music and MP3 files must be contained in the same
folder. However, the sound quality can be affected USB
by the bit rate of the MP3 file, the size of the photo
and the encoding method.
You can use the USB connection to play multimedia 5-1. Press the ◄► buttons to select the USB,
files (MP3, JPEG, DivX, etc) downloaded from the then press the ENTER button.
USB storage device. 6-1. Press the ▲▼ buttons to select the desired
1. Move to the home menu. Videos, Music or Photos, then press the
ENTER button.
2. In Stop mode, connect the USB storage
device to the USB port on the front panel of 7. For playing back Video, Music or Photo files,
the product. refer to pages 48~51.
The message “Do you want to access the ✎ NOTE
device?” will be displayed.
▪ You must remove the USB storage device safely
3. Press the ◄► button to select Yes, then (by performing the “Safe to Remove USB” function)
press the ENTER button. in order to prevent a possible damage to the USB
4. Press the RED(A) button. memory. Press the MENU button to move to the
home menu, and select the YELLOW(C) button and
press the ENTER button.
Please activate Internet@TV
internet radio service
You Tube ▪ When the Audio-CD (CD-DA), MP3 and JPEG files
to enjoy a variety of Internet Services. are in stop mode, you can’t see full screen by
pressing the FULL SCREEN button on the remote
control.
▪ If you insert the disc when playing USB storage
CD device, the device mode is changed to “DVD or CD”
USB automatically.
USB a Change Device c Safely Remove USB d View Devices " Enter
English 51
52 English
07
of ‘Challenger Rd., Ridgefield Park NJ’.
Through your remote, you can use the On-Screen
13. Press the ENTER button.
Network Services
Keypad in several Internet@TV applications to enter
text. 14. The map and address appear on the screen.
Pressing the SUBTITLE button on the remote while
you are using the Screen Keypad lets you change
✎ NOTE
the text fields to lower case, upper case, numbers ▪ Samsung Electronics shall take no legal responsibility
and icons. for any interruption of the Internet@TV service
caused by the service provider for any reasons.
▪ The Internet@TV service is to download and process
1 2 abc 3 def data via the Internet so that you can enjoy the
4 ghi 5 jkl 6 mno contents on the TV screen.
7 pqrs 8 tuv 9 wxyz
If the Internet connection is unstable, the service
Input Mode
may be delayed or interrupted.
0 Delete
Furthermore, the product may be turned off
a A 1
automatically.
If this is the case, check the Internet connection and
try again.
For example, here is how to search an address in ▪ The application service may be provided in English
Google Maps: only and the contents available may vary, depending
1. Press the ENTER button on the remote at the on the area.
Google Maps icon at the Internet@TV. ▪ When using a application service, you can not
2. Press Green(B) button to use the SEARCH operate FULL SCREEN button on the remote control.
function. ▪ For more information about the Internet@TV service,
3. Press the ◄► buttons to move to the “Search visit the web site of the applicable service provider.
or address” window. ▪ The provided services are subject to change,
4. Press the ENTER button to use Search or depending on the Internet@TV service provider.
address function. ▪ The Internet@TV service contents may differ
5. For example, suppose that you want to input according to the firmware version.
‘105 Challenger Rd., Ridgefield Park NJ’. ▪ For-a-fee DivX contents with copy protection can
6. Press the SUBTITLE button on the remote only be played using HDMI cable.
twice to change the input mode from lower If you have connected your product to your TV using
case to numbers. Component or video cables, the DivX video signal
can not output or the popup message “Connect
7. Press ‘1’, ‘0’, ‘5’. with a HDMI cable to play this file.” or “Cannot play
8. Press the Yellow(C) button on the remote current file.” will be displayed.
to input a blank space.
9. Press the SUBTITLE button on the remote
3 times to change the input mode from
numbers to upper case.
10. Press ‘2’ button on the remote 3 times to
input C.
11. Press the SUBTITLE button on the remote 3
times to change the input mode from upper
case to lower case.
English 53
Internet@TV ID
User Account : admin Use this menu to create or delete an account and
enter or delete account information.
Password :
You can control your account including contents
site’s account information.
This account is only for Internet@TV.
a Create [0~9] Enter PIN ' Cancel
Create
Create an account and link it with desired service
2. Enter the user account and password.
applications.
Settings
✎ NOTE
Create IDs and configure Internet@TV settings
from this screen.
▪ The account name must be at least 1 character in
length but no more than 8.
Settings
▪ You can register up to 10 User Account Names.
System setup
Change the Service Lock password
Manager
Internet@TV ID
Service Manager
Reset • Service Site : Register login information for
Properties service sites.
• Change Password : Change account
password.
• Delete : Delete the account.
' Cancel
54 English
07
Apps
Delete and lock applications installed to Internet@
• RED(A) (Login) : To log in to the internet
Network Services
TV.
service.
Lock • GREEN(B) (Thumbnail View) : To change the
view mode.
Lock the application. Accessing a locked
• BLUE(D) (Sort By) : To sort the applications by
application requires the password.
Featured, Most Downloaded, Most Recent or
Name.
Delete
Delete the application. ✎ NOTE
▪ The available Internet contents services may be
Properties added or deleted.
Samsung Apps
Various applications are available from here,
organized into different categories. Some
applications have a download fee.
Video
YouTube Free
Sports
TV store Test User002
Lifestyle
Games
Infomation
Other
My page
Help
My page
Displays the application list.
Help
If you questions about Internet@TV, check this
section first. If none of the tips apply, please visit
the help website.
English 55
Once the product is connected to the network, AllShare enables you to play music, video and
you can enjoy various movie-related service photo files in your PC using the product.
contents using a BD-LIVE compliant disc. To use AllShare, you must connect the product to
1. Check the size of the remaining memory. your PC via the network (See pages 27~28) and
The memory device must have at least 1GB install the SAMSUNG PC Share Manager on the
of free space to accommodate the BD-LIVE PC.
services. 1. Visit the Samsung website at www.samsung.
2. Insert a Blu-ray disc that supports BD-LIVE. com.
3. Select an item from various BD-LIVE service 2. Download the SAMSUNG PC Share Manager
contents provided by the disc manufacturer. and install it on the PC.
✎ NOTE 3. When the installation is completed, you will
see the SAMSUNG PC Share Manager icon
▪ The way you use BD-LIVE and the provided contents on your desktop.
may differ, depending on the disc manufacturer.
Double-click the icon to launch the application.
2. From the Software Upgrade menu, set Auto C: Document and settings Admin Folder Full Path
56 English
07
7
My Computer : Displays a list of the folders and ▪ Depending on the performance of the external
modem or router, HD video may not play properly.
Network Services
8
files in the PC.
▪ If your system uses a firewall, the product may not
4. Select a folder to share from the My computer locate your PC on the TV screen.
pane, and click the Share Folder Enabled ▪ AllShare does not support the following functions.
icon ( ). - The Background Music and Background Music
(To remove a shared folder : Select a folder to Setting functions.
remove from the shared folders, and click the
- Sorting files by preference in the Photo, Music,
Share Folder Disabled icon ( ).)
and Movie folders.
5. To apply the updated sharing state to the - The Change Group function.
server, click the Set Change State icon ( ). - The Safe Remove function.
6. To enable the product to locate a PC server, ▪ The Sorting method may differ depending on the
click Share from the menu bar. sever function.
Click Set Device Policy and click Accept. ▪ The search and skip operation may differ depending
SAMSUNG PC Share Manager
on the sever function.
File Share Server Help
Server : PC Share Manager
▪ If you press the STOP ( ) button during video
Set Device Policy
My Computer Shared Folder
playback, stop position will be memorized and it will
C: Document and settings Admin
IP Device
Folder
State
Delete Selected Item
Set State
Full Path be memorized only end user’s operation.
Name
FolderXXX.XXX.X.XX
1
Size Kind
SAMSUNG Blu-ray
Folder 1
FileDisc Player Deny
C: Document and settin..
Accept But stop position will not be memorized depending
Folder 2 File on the sever function.
Folder 3 File
OK Cancel
▪ During video playback, play time will not display.
▪ To use AllShare function, please locate both this
product and PC in same subnet.
English 57
PROBLEM SOLUTION
No operation can be performed with the • Check the batteries in the remote control. They may need replacing.
remote control. • Operate the remote control at a distance of no more than 6.1m.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear. • Ensure that the disc has disc menus.
The prohibition message appears on the • This message appears when an invalid button is pressed.
screen. • The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles)
• You’ve requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu • Some of the functions selected in the Setup Menu may not work properly if
selection. the disc is not encoded with the corresponding function.
The screen ratio cannot be changed. • The Screen Ratio is fixed on your Blu-ray Disc/DVDs.
• This is not a problem with the product.
No audio. • Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blocked • Press the STOP ( ) button (on front panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all the user data stored in
the BD data will be deleted.
If the HDMI output is set to a resolution your • Press the STOP ( ) button (on front panel) for more than 5 seconds with
TV cannot support (for example, 1080p), you no disc inside. All settings will revert to the factory settings.
may not see a picture on your TV. • When the factory default settings are restored, all the user data stored in
the BD data will be deleted.
58 English
08
Forgot password • Press the STOP ( ) button (on front panel) for more than 5 seconds with
Appendix
no disc inside. All settings including the password will revert to the factory
settings.
Don’t use this unless absolutely necessary.
• When the factory default settings are restored, all the user data stored in
the BD data will be deleted.
If you experience other problems. • Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service centre.
The picture is noisy or distorted • Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output. • Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input
resolution.
Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
I can see folders shared through the PC • Since it shows only files corresponding to the Image, Music, and Movie
Share Manager, but I cannot see the files. categories, files that do not correspond to these categories may not be
displayed.
AllShare function
AllShare connection between TV and PC is • IP address under the same subnetwork should be unique, otherwise IP
unstable. collision can results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
English 59
I cannot connect to the BD-LIVE server. • Check whether the network connection is successful or not by using
Network Test menu. (See page 41)
• Check whether the USB memory device is connected with product
or not.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 36)
• Please check whether the BD-LIVE Internet Connection menu is set to
Allow(All).
• If all above fails, contact the contents provider or update the latest
firmware.
When using the BD-LIVE service, an error • The memory device must have at least 1GB of free space to accommodate
occurs. the BD-LIVE service.
You can check the available size in BD Data Management. (See page 36)
✎ NOTE
▪ When the factory default settings are restored, all the user data stored in the BD data will be deleted.
60 English
08
A J T
Appendix
Accessories 14 JPEG 50 TV Aspect 31
Ad-hoc 28 Title Menu 44
Anynet+ (HDMI-CEC) 36 M Tools Menu 46~48
Audio Language 47 Movie Frame (24F) 33
AllShare 56~57 U
MP3 49~50
USB Storage Device 51
B N
BD Wise 31 W
Network Setup 37~41
BD Data Management 36 Wireless Network 28, 39
BD-LIVE 41, 56 O
BONUSVIEW 48 Z
Optimal Resolution 31~32
Background Music 50
Zoom 51
P
C
PCM Downsampling 34~35
Component 22
Popup Menu 45
Cable Network 27
Picture Setting 47~48
Camera Angle 47
R
D
Region Code 13
Digital Output 33~34
Romote Control Sensor 15
Dynamic Range Control 35
Romote Control 18
Downmixing Mode 35
Resolution 31
DTS Neo:6 35
Repeat 46, 49
DST (Daylight Saving Time) 37
DivX 37 S
Disc Menu 44
Disc Structure 44 Supported File Format 12
Software Upgrade 43, 56
H Search and Skip 45
Slow and Step 45
HDMI 20, 35
Subtitle Language 47
HDMI Supported Amplifier 24
Slide Show 50
HDMI Deep Color 33
SAMSUNG PC Share
Manager 56~57
I
Internet@TV 36, 52
Initial Settings 30, 36
English 61
Weight 1.8 kg
Dimensions 430 (W) X 223 (D) X 43 (H) mm
General
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10 % to 75 %
BD (Blu-ray Disc) Reading Speed : 4.917m/sec
Reading Speed : 3.49 ~ 4.06 m/sec.
DVD (Digital Versatile Disc)
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Disc Reading Speed : 4.8 ~ 5.6 m/sec.
CD : 12 cm (COMPACT DISC)
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
CD : 8 cm (COMPACT DISC)
Maximum Play Time : 20 min.
1 Channel : 1.0 Vp-p (75Ω load)
Composite Video
Blu-ray/DVD Disc : 576i/480i
Y : 1.0 Vp-p (75Ω load)
Video Output PR : 0.70 Vp-p (75Ω load)
Component Video PB : 0.70 Vp-p (75Ω load)
Blu-ray Disc : 1080i, 720p, 576p/480p, 576i/480i
DVD : 576p/480p, 576i/480i
1080p, 1080i, 720p, 576p/480p
Video/Audio HDMI
PCM multichannel audio, Bitstream audio
2 Channel L(1/L), R(2/R)
7.1 Channel F/L, F/R, R/L, R/R, C/T, S/W, SBR, SBL
Digital Audio Output Optical
48 kHz Sampling : 4 Hz to 22 kHz
Audio Output *Frequency Response
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio 110 dB
*Dynamic Range 100 dB
*Total Harmonic Distortion 0.003%
*: Nominal specification
- Design and specifications are subject to change without prior notice.
- For the power supply and power consumption, refer to the label attached to the product.
- Weight and dimensions are approximate.
62 English
08
NOT ALL discs are compatible
Appendix
• Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and
CD-RW/-R discs.
• Discs other than the above cannot and/or is not intended to be played by this product. And some of
the above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this product will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this product may not respond to
all operating commands or operate all features of every disc. These and other disc compatibility and
product operation issues with new and existing format discs are possible because:
- Blu-ray is a new and evolving format and this product may not operate all features of Blu-ray Discs
because some features may be optional, additional features may have been added to the Blu-ray
Disc format after the production of this product, and certain available features may be subject to
delayed availability;
- not all new and existing disc format versions are supported by this product;
- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
- some discs are produced in a manner that allows specific or limited operation and feature during
playback;
- some features may be optional, additional features may have been added after the production of this
product or certain available features may be subject to delayed availability;
- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
- some discs may not be played depending on their physical state or recording conditions;
- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
- this product operates differently than a standard DVD product or other AV equipment; and/or
- for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care centre.
• If you encounter disc compatibility or product operation problems, please contact SAMSUNG customer
care centre.
You may also contact SAMSUNG customer care centre for possible updates on this product.
• For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
Copy Protection
• Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact SAMSUNG customer care center.
English 63
64 English
08
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
Appendix
are trademarks of Dolby Laboratories.
• Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567
& other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are
trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• ABOUT DIVX VIDEO : DivX® is a digital video format created by DivX,Inc. This is an official
DivX Certified device that plays DivX video. Visit www.divx.com for more information and
software tools to convert your files into DivX video.
• ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section
in the device setup menu. Go to vod.divx.com with this code to complete the registration process and
learn more about DivX VOD.
• DivX Certified to play DivX video up to HD 1080p, including premium content.
• The product unit accompanying this user manual is licensed under certain intellectual property rights of
certain third parties. This product is covered by one or more of the following U.S. patents : 5,060,220
5,457,669 5,561,649 5,705,762 6,043,912 6,438,099 6,467,061 6,556,521 6,578,163 6,697,307
6,728,474 6,771,891 6,894,963 6,895,593 6,937,815 6,996,327 7,009,926 7,085,221 7,088,649
7,092,327 7,099,566 7,123,564 7,142,493 7,142,495 7,145,861 7,146,624 7,151,729 7,161,879
7,164,647 7,167,437 7,173,891 7,177,250 7,194,187 7,203,891 7,209,423 7,210,067 7,228,062
7,245,566 7,245,567 7,257,065 7,263,045 7,269,110 7,272,086 7,272,106 7,280,460 7,283,729
7,286,454 7,304,938
• This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming to
the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features
or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
English 65
This Samsung product is warranted for the period of 4. This product is not considered to be defective in
twelve (12) months from the original date of materials nor workmanship by reason that it
purchase, against defective materials and requires adaptation in order to conform to
workmanship. In the event that warranty service is national or local technical or safety standards in
required, you should return the product to the force in any Country other than the one for which
retailer from whom it was purchased. the product was originally designed and
However, Samsung Authorised Dealers and manufactured. This warranty will not cover, and
Authorised Service Centres in other EC Countries no re-imbursement will be made for such
will comply with the warranty on the terms issued to adaptation nor any damage which may result.
purchasers in the country concerned. 5. This warranty covers none of the following:
In case of difficulty, details of our Authorised Service
Centres are available from: a) Periodic check ups, maintenance and repair or
replacement of parts due to normal wear and
tear.
Samsung Electronics U.K. Ltd. b) C
ost relating to transport, removal or installation
Customer Care Centre PO Box 17243 Edinburgh, of the product.
EH11 4YB United Kingdom
c) Misuse, including the faiure to use this product
United Kingdom for its normal purposes or incorrect installation.
Tel : 0845 SAMSUNG (7267864)
Fax : 0845 650 8080 d) Damage caused by Lightning, Water, Fire, Acts
Web : www.samsung.com of God, War, Public Disturbances, incorrect
mains voltage, improper ventilation or any
EIRE other cause beyond the control of Samsung.
Tel : 0818 717 100
Fax : +44 (0)131 202 0630 6. This warranty is valid for any person who legally
Web : www.samsung.com/ie acquired possession of the product during the
warranty period.
7.The consumers statutory rights in any applicable
@ WARRANTY CONDITIONS national legislation whether against the retailer
1. The warranty is only valid if, when warranty arising from the purchase contract or otherwise
service is required, the warranty card is fully and are not affected by this warranty. Unless there is
properly completed and is presented with the national legislation to the contrary, the rights
original invoice or sales slip or confirmation, and under this warranty are the consumers sole rights
the serial number on the product has not been and Samsung, its subsidiaries and distributors
defaced. shall not be liable for indirect or consequential
2. Samsung’s obligations are limited to the repair or, loss or any damage to records, compact discs,
at its discretion, replacement of the product or videos or audio taper or any other related
the defective part. equipment or material.
3. Warranty repairs must be carried out by
Authorised Samsung Dealers or Authorised SAMSUNG ELECTRONICS (U.K.) LTD.
Service Centres.
No re-imbursement will be made for repairs
carried out by non Samsung Dealers and, any
such repair work and damage to the products
caused by such repair work will not be covered
by this warranty.
Area Contact Center Web Site Area Contact Center Web Site
` North America
0848 - SAMSUNG (7267864, www.samsung.com/ch
Canada 1-800-SAMSUNG (726-7864) www.samsung.com Switzerland www.samsung.com/
CHF 0.08/min) ch_fr/ (French)
Mexico 01-800-SAMSUNG (726-7864) www.samsung.com
Lithuania 8-800-77777 www.samsung.com
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com
Latvia 8000-7267 www.samsung.com
` Latin America
Estonia 800-7267 www.samsung.com
Argentine 0800-333-3733 www.samsung.com
` CIS
0800-124-421
Brazil www.samsung.com Russia 8-800-555-55-55 www.samsung.com
4004-0000
Chile 800-SAMSUNG (726-7864) www.samsung.com Georgia 8-800-555-555
AK68-01859D