Académique Documents
Professionnel Documents
Culture Documents
Talking Point
FLUIDS TECHNOLOGY AND DRILLING WASTE MANAGEMENT SERIES
DRILLING FLUIDS AND CUTTINGS MANAGEMENT ASIA 2011
22-24 February 2011 | Bangkok
Reduce time to drill, increase wellbore stability and maximise recovery from your reservoir through
Technical, Management and Environmental Excellence for positive economic return on your well
Thailand will provide information on the updated environmental regulations and
GET FREE BROCHURE
policies of Thailand on drilling fluids and cuttings waste management.
Ester-based drilling
Another growing oil and gas player, Vietnam has just released a new regulation for
drilling fluids and cuttings management – which the Centre for Environmental fluids back at the
Monitoring, Data and Information Director, Hoang Duong Tung will present. discussion table, as
environmental legislation
Earlier, Mrs Nelly Hilman, Deputy Minister, Ministry of Environment Indonesia joins restricts the discharge of
other top regulators in Asia to discuss major developments in drilling fluids and drilling waste/cuttings
cuttings management in relation to environmental permits and discuss
especially when
opportunities to create regional standards for Asia.
contaminated with OBM.
The New Delhi-based Central Pollution Control Board will also be presenting its Download the free
regulation governing drilling and gas extraction industry at the Drilling Fluids and brochure and discuss.
Cuttings Management Asia Forum on 22-24 February at Four Points by Sheraton,
Bangkok, given that India has a sizeable total area of 3.14 Million square kilometre
of onshore and offshore oil & gas fields. Are you an oil and gas or
drilling fluids company in
In the US, green initiative groups protest especially when laws do not require oil Thailand?
and gas companies to automatically disclose what chemical products they are
using during drilling, hydraulic fracturing or well workover operations. “It is it is The top regulator of the Dept
of Mineral Fuels will be
extremely difficult for the public to find out what chemicals are being used by the available for dialogue on
oil and gas industry,” says EarthWorks. drilling fluids and cuttings
management regulations.
Also, the Titi Tudorancea Bulletin reports some trends, which are very telling.
Join the dialogue with fellow
oil and gas professionals
The compliance engineer is the most common name for a relatively new position in and other peers in Asia. Call
the oil field, emerging around 2002 due to new environmental regulations on Rex Sayson on (+65) 6844
synthetic mud in the United States. Previously, synthetic mud was regulated the 2080 or email
rex@arcmediaglobal.com to
same as water-based mud and could be disposed of in offshore waters due to low
find out more.
toxicity to marine organisms.
New regulations restrict the amount of synthetic oil that can be discharged. These
new regulations created a significant burden in the form of tests needed to
Talking Point
determine the "ROC" or retention on cuttings, sampling to determine the
percentage of crude oil in the drilling mud, and extensive documentation. It should Is there a need to standardise
be noted that no type of oil/synthetic based mud (or drilled cuttings contaminated Southeast Asian drilling fluids
with OBM/SBM) may be dumped in the North Sea. Contaminated mud must either and waste management
regulation?
be shipped back to shore in skips or processed on the rigs.
Yes – The regulations are too
costly due to inconsistent
“The Asian regulators are on the ball when it comes to promoting new rules and regulations. Standardisation will
make compliance more cost-
updates this year,” according to an industry player familiar with the issue. He cites effective and transparent.
that this may be due to the recent GOM oil spill, which crystallised the economic
No – The regulations need to be
and environmental impact of these hazardous fluids and waste. stricter in some areas, more than
others.
However, oil and gas companies still continues to pursue technical alternatives to
further reduce their drilling waste and discharges, especially in countries that still Maybe – We are already very
lack the waste handling capacities found in more mature oil and gas producing environmentally conscious in
areas. “Engaging regulatory authorities in an ongoing dialogue to evaluate the our operations. And we may not
feasibility of waste reductions up to the possibility of achieving zero discharge need new standards
offshore is important,” says an oil and gas expert, “and will help value the nonetheless.
feasibility of these technical innovations, by weighing its risks versus rewards.
FLUIDS TECHNOLOGY AND DRILLING WASTE MANAGEMENT SERIES
DRILLING FLUIDS AND CUTTINGS MANAGEMENT ASIA 2011
22-24 February 2011 | Bangkok
Reduce time to drill, increase wellbore stability and maximise recovery from your reservoir through
Technical, Management and Environmental Excellence for positive economic return on your well
Chevron Thailand E&P is at the forefront of working together with the Kingdom of
GET FREE BROCHURE
Thailand government to preserve its offshore environment and will be presenting
some alternatives being developed. Ester-based drilling
The Meet the Regulators panel discussion at the DFCMA Forum on the 23rd fluids back at the
February 2011 in Bangkok will be the first ever platform to discuss opportunities discussion table, as
to create a regional standard for safe, effective and environmentally compatible environmental legislation
drillings fluids and cuttings waste management practices, as the need to balance restricts the discharge of
regulations to protect the environment and push toward operational and cost drilling waste/cuttings
efficiency intensifies. especially when
contaminated with OBM.
New generation drilling fluids, such as paraffins, olefins and esters are less toxic Download the free
and are more biodegradable than early generation diesel and mineral oil base
brochure and discuss.
fluids. Petronas study featured at the Forum revived the discussion on the
development of an environmentally acceptable ester-based drilling fluid—in the
past shelved us “too expensive” or “not powerful enough.” Petronas applied this
Are you an oil and gas or
study on drilling through highly sensitive shale areas with challenging well profiles,
drilling fluids company in
including highly deviated and extended long reach, normally requiring OBMs. Thailand?
On the solution side, Baroid-Halliburton continuously releases developments in The top regulator of the Dept
their drilling fluids and cutting management solutions suite, maintaining their lion’s of Mineral Fuels will be
available for dialogue on
share of the drilling fluids market and will share some of them in the Forum. drilling fluids and cuttings
management regulations.
It would be interesting if there would be presentations on recently developments
in high-performance water-based fluids as well as other new releases last year. Join the dialogue with fellow
oil and gas professionals
and other peers in Asia. Call
The Drilling Fluids and Cuttings Management Asia Forum in Bangkok on 22-24 Rex Sayson on (+65) 6844
February 2011 has a vision to bring forward a robust opportunity to discuss the 2080 or email
rex@arcmediaglobal.com to
creation of an Asian regional standard in drilling fluids and cuttings waste find out more.
management, present an independent benchmarking platform for comparative
analysis of recent technological developments in fluids and waste disposal so far
and provide the specifics for an integrated approach to developing technologies
Talking Point
that will address the root cause of the issue. Visit
www.arcmediaglobal.com/drillingfluids for more info. Is there a need to standardise
Southeast Asian drilling fluids
and waste management
The Center for Energy Sustainability and Economics is an industry research centre regulation?
(IRC) that works to bring top executives together in communities of learning and
Yes – The regulations are too
practice to act as a catalyst for generating high-value energy business insight and costly due to inconsistent
channel top expertise to where the world needs it most. Center for Energy regulations. Standardisation will
meetings are powered by Arc Media Global, an integrated international marketing make compliance more cost-
effective and transparent.
specialist headquartered in Singapore.
No – The regulations need to be
stricter in some areas, more than
Advertise | Register | Website | Discuss others.
Maybe – We are already very
environmentally conscious in
P.S. Feature your chemicals and technology at the only dedicated market place for our operations. And we may not
drilling fluids and cuttings management in Asia. Explain your product face-to- need new standards
nonetheless.
face to your buyers at the forum. Email Rex Sayson for marketing platforms
available at rex@arcmediaglobal.com or call us at +65 6844 2080.