Académique Documents
Professionnel Documents
Culture Documents
Product Description
This document describes the Samsung RRU product, RFB01A-08A, including its
functions, characteristics, hardware and software.
Radio Access Network
Document Version0.1
Oct. 2017
© 2017 SAMSUNG Electronics Co. Ltd.
All Rights Reserved. No part of this document may be photocopied, reproduced, stored in a retrieval
system, or transmitted, in any form or by any means whether, electronic, mechanical, or otherwise
without the prior written permission of SAMSUNG Electronics Co., Ltd.
No warranty of accuracy is given concerning the contents of the information contained in this
publication. To the extent permitted by law no liability (including liability to any person by reason of
negligence) will be accepted by SAMSUNG Electronics Co., Ltd., its subsidiaries or employees for
any direct or indirect loss or damage caused by omissions from or inaccuracies in this document.
SAMSUNG Electronics Co., Ltd. reserves the right to change details in this publication without
notice.
Contents
Preface 4
Organization of This Document ........................................................................................ 4
Chapter 1 Introduction 5
Overview............................................................................................................................. 5
Architecture......................................................................................................................... 5
Benefits............................................................................................................................... 6
Chapter 2 Product Details 7
Product Appearance ........................................................................................................... 7
Function Description ........................................................................................................... 8
Chapter 3 Technical Specifications 10
Specifications.................................................................................................................... 10
Environmental Specifications ........................................................................................... 10
Appendix Acronyms 11
This document describes the Samsung RRU product, RFB01A-08A, including its
functions, characteristics, hardware and software.
Overview
Samsung eNB supports Remote Radio Unit. RRU is a remote radio unit mounted
near an antenna. Among various units in Samsung eNB, this document is for RRU
which supports 2Tx and 2Rx paths with 80W output power.
Architecture
RRU is an integrated RF unit consisting of a transceiver board, power amplifiers
and a filter in an outdoor enclosure. RRU has two downlink and two uplink paths,
respectively. Figure 1 shows RRU architecture.
In the downlink path, the transceiver board converts and modulates baseband
signals received from the digital unit to analog radio frequency signals. Power
amplifiers amplify analog radio signals into high-power radio signals transmitted
to the antenna through an antenna port of the filter.
In the uplink path, the radio signals received through the filter are amplified by a
LNA (Low Noise Amplifier). The amplified radio signals are down-converted and
formatted for CPRI interface in the transceiver board and transmitted to digital
unit.
Benefits
Table 1. Benefits
Item Description
High Throughput RFB01A-08A supports up to 2 carriers with 35MHz channel bandwidth.
RFB01A-08A provides 2x2 MIMO functionalities.
Energy Saving Features Dynamic Power Amplifier bias on/off function turns the power off when there
is no traffic, ensuring that energy is not wasted.
Environmental Tolerance RFB01A-08A has small size of under 12 liters / 15 kg and can work in the
wide range of operating temperature from -40℃ to 50℃ and meet IP65,
which helps operators deploy their network in severe environments.
In addition, the radio unit offers an innovative design with semi-assembled
components available thus making the bracket installation very easy.
Chapter 2 Product
Details
Product Appearance
RRU has the rectangular box outlook. RRU weighs about 15 kg with 12
liters. Figure 2 shows the physical appearance of RRU and Figure 3
shows external ports in the bottom side.
Function Description
RFB01A-08A provides functions as below.
Signal amplification
RF signal filtering
Fault Detection
Detect fault alarms such as over power, VSWR, CPRI fail, Clock fail
etc for checking the RRU status.
Control the beam tilting angle of the external antenna. The interface
specification shall comply with the AISG v.2.0
Chapter 3 Technical
Specifications
Specifications
Table 3. Specification
Items Specification
Technology LTE FDD
Operating Frequency DL 925~960MHz, UL 880~915MHz
Instantaneous Bandwidth 35MHz
Channel Bandwidth 5, 10MHz
Carrier configuration Up to 2Carriers (LTE only)
RF Chain 2T2R
RF Output Power Up to max 40W per path, 80W per unit
CPRI Max. 2.5Gbps 2port
Weight/Volume 15 kg / 12 L
Size :W(mm) × H(mm) × D(mm) 320 (W) × 320 (H) × 117 (D)
Environmental Specifications
Table 4. Environmental Specification
Items Specification
Power Supply -48 VDC (-38V ~ -57V)
Operating Temperature -40 to 50 °C
(without solar load)
Humidity 5 to 100 %
Altitude - 60m to 1,800m
Vibration Telcordia GR-63-CORE
Earthquake Telcordia GR-63-CORE
Ingress Protection Rating IP 65
(Dust, Water Protection)
EMC EN 301 489-1
EN 301 489-50