Académique Documents
Professionnel Documents
Culture Documents
FUTURES
School of Engineering
CONTENT
LEARNING CYCLE 07
FACULTY SUPPORT 12
FEE SCHEDULE 13
APPLICATIONS 14
The University of South Australia (UniSA) is an innovative and successful institution with a 150-year
history. Our teaching and research reflect the needs of modern society, a balance between
knowledge and application.
Almost a third of our 36,000 students are citizens of other countries and we have the largest number
of international students in South Australia. We also have an established presence in the Asia Pacific
region, particularly in Singapore, Malaysia, Hong Kong and China.
Our focus is on good teaching, experiential learning and skills that matter. We were the first university
in Australia to formally state seven core graduate qualities that employers can expect to find in any of
our graduates, whatever the course and wherever it is taught.
We also have a growing international research profile. UniSA specialises in research that is inspired
by end-users and undertaken in collaboration with industry, government and the professions across
Australia and internationally.
Choosing to study at UniSA means you’ll earn more than just a degree. You’ll graduate with an
international network of colleagues, ready to progress in the profession of your choice, with the skills
to make an immediate and lasting contribution in the society.
02
KAPLAN HIGHER EDUCATION INSTITUTE IN SINGAPORE
UniSA today has over 36,000 students across its 5 South Australian from the school of electrical and information engineering, was named
campuses, and including approximately 7,000 students enrolled in its as the Prime Minister’s Australian University Teacher of the Year and
offshore programs. It is a global university, with established links with other Associate Professor Julie Mills, from the school of natural and built
universities on all continents. UniSA is also known to be a leader in the environments, was awarded the Australasian Association for
application of knowledge through a vast array of mutually beneficial
Engineering Education Teaching Excellence award.
partnerships with industry, business and the professions.
• We received a national award from the Business and Higher Education
The university offers qualifications from undergraduate to doctoral level in Round Table of Australia in 2008 in recognition of our sustained efforts
40 professional disciplines, and is widely recognised for its to foster collaboration with business.
accomplishments in engineering, business, communication studies, • We have formed a partnership with the prestigious Australian National
teacher education, health sciences and social sciences. With such a wide University to develop joint programs.
spectrum of academic disciplines and an excellent national and
• Our MBA program is now among Australia’s top 10, with a 5-
international reputation for the quality of its teaching and research
program, UniSA attracts students from a wide range of social and star rating in the 2009 Good Universities Guide.
economic backgrounds from Australia and overseas. • We have received multi-million dollar funding for two new research
centres that promote our core values of cultural diversity and
The school of electrical and information engineering is 1 of 5 schools international relevance: The National Centre for Student Equity in
within the division of information technology, engineering and the
Higher Education, and the International Centre for Muslim and Non-
environment. The school is located at the Mawson Lakes Campus of the
Muslim Understanding.
UniSA. The school is also home to the UniSA Aviation Academy, which is
based at Parafield Airport adjacent to the campus. • We secured almost A$60 million in total research income in 2009.
• We were awarded A$45 million by the Australian federal and state
Mawson Lakes is a suburb of Adelaide, capital of South Australia. The governments to create a new A$73 million international materials and
campus is located 14 km north of Adelaide and is readily accessible by
minerals science learning and research facility.
public and private transport.
• We have established new research institutes specialising in defence,
Specialist teaching concentrations at the school of electrical and advanced manufacturing and sustainable systems & technologies.
information engineering are: • We have alumni chapters in Singapore, Hong Kong, Malaysia, Taiwan
• Electrical and Mechatronic • Electronics and and London.
Engineering Microengineering
• Telecommunications • Test and Evaluation
• Applied Physics • Civil Aviation
• Computational Physics • Computer Systems Engineering
• Microsystems Technology • Electrical Power
• Systems Engineering • Telecommunications
• Optical Engineering
04
AIMS AND OBJECTIVES
This is a bachelor conversion program which enables polytechnic graduates in Singapore with relevant industrial experience to upgrade their
qualifications to the professional level of Bachelor of Engineering. The program aims to prepare students for a professional career in electrical,
electronic or telecommunications engineering with particular emphasis on either electrical power and mechatronic systems, electronic design and
system integration, or networking and communications. Polytechnic graduates with relevant industrial experience will be eligible for 2 years of
advanced standing, comprising the following 16 4.5-unit courses (equalling 72 units).
Engineering Materials √ √ √
Computer Techniques √ √ √
Programming Fundamentals X √ √
Engineering Mathematics 3E √ √ √
Engineering Mathematics 4E √ √ √
1
Engineering (Telecommunications), students need to complete the 16 • Computer Hardware
• IT Physics
courses (including project work and a 2-week workshop in Adelaide) • Digital Devices and Systems
specified for each program. Students are required to satisfy the
TERM
2
practical experience requirements for the award of the degree by • Signals and Systems
• Introduction to Communication Systems
obtaining credit for the zero-unit course industry experience report. • Computer Communications and Networks
TERM
3
1
Students with relevant work experience or further relevant studies • Digital Signal Processing
• Real Time Systems and Control
like post polytechnic diploma, may apply for additional credit for a • Professional Engineering Practice E
maximum of four courses2 (18 units) from any of the listed courses
• Transnational Workshop*
(excluding the project). This application for additional credit3 will be
• Practical Industrial Experience Report (Zero Unit Course)#
considered on an individual, case-by-case basis.
TERM
4
• Data Structures
The program provides a total of 320 hours of seminars and • Systems Engineering
• Electrical and Information Engineering Project 1/1H
workshops; or 20 hours per course. Seminars are fully conducted by
visiting lecturers from the university. The curriculum is taught over 6 TERM
5
• Modern Communication Systems
terms. Classes are generally held in the evenings to suit the busy • Telecommunication Networks M
• Electrical and Information Engineering Project 2/2H
schedules of program participants. It may be completed through
offshore learning mode with the following schedule: TERM
TERM
1
• Electromechanics
• IT Physics * Students are required to attend a 2-week on-campus workshop at Mawson Lakes.
• Electromotion The workshop must be undertaken during the program of study. Students must
complete all activities within the workshop in order to become eligible to graduate.
TERM
2
• Signals and Systems
• Mechatronics 1
# All students must complete a period of industrial experience in a relevant industry
• Power Electronics and Drives
prior to graduation. This program requires a minimum of 12 weeks of industrial
TERM experience in a relevant industry, which would normally be obtained from the second
3
• Mechatronics 2
• Real Time Systems and Control year of the program onwards. Assessment in the course practical industrial
• Professional Engineering Practice E
experience will remain incomplete until the student submits a written report and
• Transnational Workshop* receives a pass.
• Practical Industrial Experience Report (Zero Unit Course)# 1
UniSA policy allows for additional credit.
2
TERM Please refer to the list of courses for your specific stream (electrical, electronic or telecommunications).
4
• Electrical Power Systems 3
• Systems Engineering Please refer to the section on page 13 on how to apply for additional credit.
• Electrical and Information Engineering Project 1/1H
TERM
5
• Power Systems Operations and Control
• Intelligent and Digital Control
• Electrical and Information Engineering Project 2/2H
TERM
6 • Elective
TERM
1
• Computer Hardware
• IT Physics
• Digital Devices and Systems
TERM
2
• Signals and Systems
• Introduction to Communication Systems
• Computer Communications and Networks
TERM
3
• Digital Signal Processing
• Real Time Systems and Control
• Professional Engineering Practice E
• Transnational Workshop*
• Practical Industrial Experience Report (Zero Unit Course)#
TERM
4
• Electronic Filters and Amplifiers
• Systems Engineering
• Electrical and Information Engineering Project 1/1H
TERM
5
• VLSI Design G
• Microengineering Technology
• Electrical and Information Engineering Project 2/2H
TERM
6 • Elective
06
LEARNING CYCLE
The program provides 20 hours of contact for each non-project course, excluding workshop attendance. Students will also need to undertake
approximately 100 hours of self-study per course. A typical cycle is a 7-week period covering ONE course of study. The advantage of this structure
is that busy professionals and managers in the program are able to fully concentrate on the course, before moving on to the next. Each term will
cover 3 courses, spanning 6 months.
Program Management
Computer communications concepts. Layered network architectures Design of digital filters, applications of Fourier transform, sampling,
and protocol reference models. Systems and technologies for multirate signal processing, DSP case studies: power spectrum
the physical layer. Medium access control protocols. Data link estimation, adaptive filters.
protocols. Network layer functions and protocols. Queuing models.
Internetworking concepts. Local area networks. Wide area/public
telecommunications networks. IP-based networks and services. Elective 1
The TCP/IP suite of protocols. Network applications and
application softwares. Elective courses which provide students with an opportunity to
acquire knowledge and skills outside their main area of study.
Computer Hardware
Electrical and Information Engineering Project
Review of 8-bit MPU/MCUs. Architecture and assembly language
1/1H/2/2H
programming of a 16/32 bit microprocessor; exception, interrupt
handling; cross-assembly and cross compilation; hardware
The specification and systems requirement analysis of engineering
interfacing; input-output methods; specialised controller circuits;
projects in the discipline areas of electrical, electronic,
timing diagrams; system solid-state memory design; memory
telecommunications and computer systems engineering; quality
management hardware; industry bus specifications and interfacing.
standards, literature and computer data base searches, the design
process, project scheduling, system performance simulation and
testing, specialised topics, documentation, seminar presentation.
Data Structures
08
COURSE OUTLINES
Fundamentals of electromechanical energy conversion via the Analogue modulation; Receiver and transmitter architectures; Phase
medium of electromagnetic fields. Magnetic materials and circuits. Locked Loops; BER Performance Calculations for PAM and BPSK;
Relays. Electromagnet. Electromechanical actuators: principles of Wired and Wireless Communication Channels; Multiplexing
operation, linear actuators, rotary actuators, actuator performance techniques; Simulation of Communication Systems.
analysis using simple models, determining force and torque in an
electromechanical actuator. Introduction to sensors: proximity
IT Physics
sensors, linear and angular position encoders. Measurement of
displacement and velocity. Introduction to industrial motors:
The free electron model of a conductor. Quantum Physics.
DC motors, AC motors. Motor performance characteristics. Types of
The band theory of solids. Causes of resistance. Semiconductor
mechanical load for motors. Selection of an industrial motor for a
properties. Electrostatic fields. Magnetic fields. Maxwell’s equations.
given task. Introduction to linear motors; types and applications of
Electromagnetic waves. Electromagnetic radiation. The p-n junction.
linear motors Special motors including servo motors, permanent
Superconductivity, Josephson effect and applications. Lasers.
magnet motors, variable reluctance motors, stepper motors, BLDC
Opto-electronics: materials, devices. Optical fibres and applications.
motors. Motor control. Drive systems for variable speed operation.
Microwave devices. Field emission devices. Gas discharges
Programmable logic controllers (PLCs): Internals, symbols, PLC state
and plasmas.
machine, components of a PLC, ladder programming.
Electromotion
Elements of mechatronic systems. Selection of electromotion Solid state power electronic devices such as power thyristors, GTO,
devices. Sensors: electromagnetic, piezoelectric, infrared, ultrasound. IGBT, MCT and induction to thyristors and their applications in power
Actuators for mechatronics. Transducers for measurement and conversion systems. System considerations, power electronic drive
control in mechatronic systems. Advanced power supplies: linear and systems, performance of machines driven by power electronic
switched mode power supplies; storage batteries. Power converters and effect on machine ratings. The industrial drives and
amplification within the context of mechatronic systems. Drives. their classification. Dynamics analysis and performance
Encoders. Mechanical and fluidic elements. Kinematic considerations characteristics of AC and DC drives.
in trajectory design. Static and dynamic behaviour of mechatronic
elements. Control and stability in mechatronic systems.
Microelectromechanical systems (MEMS). Microcontroller operation, Power Systems Operations and Control
interfacing and programming. Programmable logic controllers. Signal
acquisition and conditioning in mechatronic systems. Economic dispatch of thermal units and methods of solution;
transmission losses; unit commitment. Control of generation. Active
power-frequency and reactive power-voltage control. Automatic
Mechatronics 2 generation control. Optimal power flow. Power system protection and
reliability of protection system. Power system stability and protection
Design and analysis of mechatronic systems: system design for stability enhancement. Interchange of power and energy. Power
techniques applied to mechatronic systems; compatibility system security. Power quality; harmonic generation, monitoring and
considerations; sensitivity analysis. Implementation of designs and elimination.
control strategies in mechatronic systems. Optimality considerations.
Robotics. Machine vision. Digital control techniques. Application of AI
to mechatronic systems. Mobile robotic agents. Multiagent robotic Professional Engineering Practice E
systems. Modelling and simulation of mechatronic systems. Choice of
power supply. Use of power electronics in mechatronic systems: Aspects of professional engineering practice including communication
ratings; protection; interfacing; efficiency; economics. Modelling and skills, meeting procedures, chairmanship, roles of managers in
simulation of supply/power electronic/drive circuits. Aspects of engineering enterprises, financial reports, preparation for work
electrical and electronic design considering critical quantities. Current placement in industry.
technologies. Encoder interfacing and motion control. Data
communication. Application of multidisciplinary concepts to the Project management including project management -
design and prototyping of a small scale mechatronic system. project definition, analysis, planning, decision-making, programming
and scheduling.
Linear Time Invariant Continuous and Discrete Systems, System Fundamental concepts in telecommunication networks; Evolution of
Analysis using the Transfer Function Representation, Laplace, Fourier telecommunication services, networks and technologies; Teletraffic
and z-transform in Signals and Systems Analysis, Convolution engineering: basic concepts and simple models; Switched network
Representation, Sampling, Introduction to Digital Filters. infrastructure, transport networks; Control plane: signalling concepts
and technologies; Wireless and mobile network access: cellular
networks, wireless local and wide area networks; Mobile Internet and
Systems Engineering the Next Generation Networks; Infrastructure-less (ad-hoc)
networking; Issues in service provisioning: QoS, security.
Understanding systems, reductionism, emergence, hierarchy, hard
and soft systems. Means of modelling and evaluating systems: the
multi-dimensional perspective of the Unified Systems Hypothesis,
VLSI Design G
function, form, behaviour, efficiency, effectiveness and value. The
application of systems thinking to the development of complex VLSI technologies: NMOS and CMOS examples; layout design rules;
modern systems. Introduction to systems engineering standards design of combinational CMOS logic circuits: performance issues;
including ANSI/EIA 632, IEEE 1220, MIL STD 499B, ISO/IEC 15288. design of sequential CMOS circuits: registers; dynamic and static
Major processes of systems engineering: User needs analysis, memories; datapaths; floor planning; design for testability;
requirements analysis, specification, design, implementation, testing, hardware description languages: levels of abstraction; behavioural
operations, disposal. Process documentation. Technical evaluation modelling and simulation of digital systems; structural modelling and
and management in systems engineering. Systems lifecycle models. logic synthesis.
• Provisionally accredited by Engineers Australia. • Remote online access to the university's laboratories.
• Possible completion in 2 years*. • Supported by email/Internet.
• 2-week engineering workshop at the university. • Textbooks and study notes provided.
• One course every 7 weeks; excellent structure and • Excellent reference library at Kaplan City Campus.
format for busy professionals. • Direct access to the UniSA virtual library.
• Modular and flexible structure, integrating learning with • The degree will be the same as that awarded to
practical applications. on-campus students of the university.
• Assignments can count for as much as 50% of total
marks.
* For students who in exceptional circumstances are awarded credits for four additional courses.
12
FEE SCHEDULE
Kaplan Higher Education Institute shall, within 7 working days of notifying the student
1st instalment S$ 4,666 in writing of above circumstances (i) to (iv), provide the student with information and
details of the alternative confirmed course arrangement to allow the student to make
timely and appropriate decision on the alternative arrangement. Kaplan Higher
2nd instalment S$ 4,666 Education Institute offers a 7-day cooling off period to students who wish to
withdraw after signing their student contract. Students will receive the maximum
refund of the course fees if they withdraw within 7 days of signing the student
3rd instalment S$ 4,666 contract. All withdrawal requests must be presented to Kaplan Higher Education
Institute officially in writing.
Please refer to CPE website (www.cpe.gov.sg) for details on EduTrust, fee protection
scheme and standard PEI-student contract.
Non-tuition Fees (exclusive of GST)
The non-refundable application fee is $150. All students must apply for the Kaplan Graduation
student access card and pay a non-refundable fee of $9.35.
Students who successfully complete the program will be
awarded the prestigious Bachelor of Engineering (Electrical
EduTrust Engineering), Bachelor of Engineering (Electronic Engineering),
Bachelor of Engineering (Telecommunications) or Bachelor of
EduTrust is a voluntary certification scheme that helps to distinguish higher quality Engineering (Electrical Electronic Engineering), Bachelor of
players in Singapore’s private education industry. As part of the EduTrust Engineering (Electronic Engineering), Bachelor of Engineering
requirements, the Council for Private Education (CPE) has put in place mandatory (Telecommunications) with Honours degree of the University of
requirements which include fee protection scheme and the use of a standard South Australia.
PEI-student contract.
The degree will be the same as that awarded to on-campus
students of the university. Graduates will be allowed to use the title BEng or BEng
Fee Protection Scheme (FPS) (Hons) after their names. Presentation ceremonies are held yearly in Singapore and
graduation ceremonies are held twice a year in Adelaide. Graduates are encouraged
Under the fee protection scheme, Kaplan Higher Education Institution has put in
to attend the degree convocation in Adelaide with their families whenever possible.
place an insurance arrangement that ensures fees paid by students to the school are
insured by Lonpac Insurance Bhd, a Council for Private Education (CPE) appointed
service provider. The insurance protection serves to protect the students' fees in the Honours
event a Private Education Institution (PEI) is unable to continue operations due to
insolvency, and/or regulatory closure. Furthermore, the FPS protects the student if Students achieving a credit level average, after completing the first eight courses of
the PEI fails to pay penalties or return fees to the student arising from judgments the relevant stream of study, will be invited to enrol in the honours project (equal to
made against it by the Singapore courts. The FPS is compulsory for all local and two courses). Successful completion of the program at credit level average and the
international students taking courses at PEIs seeking EduTrust certification. FPS honours project may lead to the award of a degree with honours.
applies to all courses with duration of more than 1 month or 50 hours. Students
enrolled in these courses will be required to pay a fee for FPS which varies
depending on the fees of the courses insured. How to Apply for Additional Credit
Applicants with relevant work experience or further relevant study may apply for
additional credit for any of the non-project courses. Applicants should address the
learning outcomes of the relevant courses by submitting a detailed report or
providing evidence of further relevant study post polytechnic diploma.
Students enrolling into this program are required to meet the following Study loans are available with all local banks. Interested candidates may
criteria: contact:
• A recognised polytechnic diploma in the relevant field of engineering, POSB : 6333 0033 www.posb.com.sg
or related technical areas or equivalent qualifications. NTUC Thrift : 6534 7360 www.ntucthrift.com.sg
• Good command of English. TCC Ltd : 6319 3700 www.tcc.org.sg
• Relevant industrial experience, amounting to at least 1 year. RHB Bank : 1800 323 0100 www.rhbbank.com.sg
Selection
Checklist
Selection to the program is based on the following:
Have you:
• Quality of academic record. Attached a complete official certificate and transcript of your tertiary
• Appropriateness of work experience, particularly the length, level and record from each institution you have attended?
responsibilities of position held (including current position). Attached 2 passport-sized photos?
• Motivation to undertake the Bachelor Of Engineering (Electrical/
Provided sufficient details about past work experience or supplied a
Electronic/Telecommunications) program and potential to benefit from
resume to support your application?
the program.
Signed and dated your application?
Although a formal selection interview is not part of the process, the Included your application fee?
selection panel may ask to meet with a potential candidate for clarification
of issues relating to their application.
The full application package should be sent to:
Director, UniSA BEng Program (Part-time)
Standard Student Contract Kaplan Higher Education Institute
Kaplan City Campus 51 Cuppage Road #02-01 Singapore 229469
It is a mandatory requirement by the CPE that all students, both local and
international, sign the student contract with Kaplan Higher Education
Institute upon acceptance of the offer made by Kaplan Higher Education
Institute during the admission process (note: Student contract will not be
The University of South Australia and Kaplan Higher Education Institute reserve the right to
required for non-award programs with a duration of less than 50 hours or alter, amend or delete any program, fee, course, admission requirement, mode of delivery
1 month).The student contract serves to minimise future disputes and or other arrangements without prior notice.
hence, has to be completely understood by students prior to making
course fee payments. The information contained in this brochure is correct at time of printing (November 2010).
BRN:198600044N
Please refer to CPE website (www.cpe.gov.sg) for details on EduTrust, fee Registered with the Council for Private Education, Ministry of Education, Singapore (No.
protection scheme and standard PEI-student contract. 4072). UniSA CRICOS Provider Number 00121B
14
The undergraduate and postgraduate programs hosted and managed by Kaplan Higher Education Institute have attracted ambitious
managers and executives from many corporations in commerce, industry, statutory boards, government departments and
professional practices. Listed below are some of these organisations.
Kaplan City Campus @ Orchard 51 Cuppage Road Levels 2-4 Singapore 229469
Kaplan City Campus @ Wilkie Edge 8 Wilkie Road Level 2 Singapore 228095
(65) 6733 1877 info.sg@kaplan.com www.kaplan.com.sg
NOTE: Revised tuition and non-tuition fees for
University of South Australia 2011 intakes.
The total fee covers university registration, study guides, textbooks, intensive seminars and workshops,
assignments, examinations (if applicable), projects, degree (if earned) and transcript. Program fees are exclusive of
GST and are due and payable as follow:
Master of
Engineering
(Engineering & S$3,520 S$3,520 S$3,520 S$3,520 S$3,520 - S$17,600
Technology
Management)
Bachelor of Arts
(Communication & S$3,520 S$3,520 S$3,520 S$3,520 S$3,520 - S$17,600
Media Management)
Bachelor of
Engineering
(Honours) S$4,666 S$4,666 S$4,666 S$4,666 S$4,666 S$4,670 S$28,000
- Electronic
Engineering
Bachelor of
Engineering
(Honours) S$4,666 S$4,666 S$4,666 S$4,666 S$4,666 S$4,670 S$28,000
- Electrical
Engineering
NOTE: Information herewith has been updated and is accurate as of 12 January 2011
Kaplan City Campus @ Wilkie Edge, 8 Wilkie Road, #02-01, Wilkie Edge, Singapore 228095
Tel: (65) 6733 1877 Fax: (65) 6733 2977
BRN: 198600044N www.kaplan.com.sg
Bachelor of
Engineering
(Honours) S$4,666 S$4,666 S$4,666 S$4,666 S$4,666 S$4,670 S$28,000
-
Telecommunications
Bachelor of
Engineering
(Honours) S$5,250 S$5,250 S$5,250 S$5,250 - - S$21,000
- Mechanical
Engineering*
Bachelor of
Technology in
S$4,125 S$4,125 S$4,125 S$4,125 - - S$16,500
Product Design and
Innovation
All fees are payable to Kaplan Higher Education Institute Pte Ltd in accordance with the schedule above.
Candidates who do not comply with the fee schedule will not be permitted to proceed with the program.
EduTrust
EduTrust is a voluntary certification scheme that helps to distinguish higher quality players in Singapore's private
education industry. As part of the EduTrust requirements, the Council for Private Education (CPE) has put in place
mandatory requirements which include Fee Protection Scheme and the use of a standard PEI-Student Contract.
NOTE: Information herewith has been updated and is accurate as of 12 January 2011
Kaplan City Campus @ Wilkie Edge, 8 Wilkie Road, #02-01, Wilkie Edge, Singapore 228095
Tel: (65) 6733 1877 Fax: (65) 6733 2977
BRN: 198600044N www.kaplan.com.sg
arising from judgments made against it by the Singapore courts. The FPS is compulsory for all local and
international students taking courses at PEIs seeking EduTrust certification. FPS applies to all courses with duration
of more than 1 month or 50 hours. Students enrolled in these courses will be required to pay a fee for FPS which
varies depending on the fees of the courses insured.
Refund Policy
Kaplan Higher Education Institute shall inform the student within 3 working days if:
i. it fails, for any reason, to commence the course on the course commencement date.
ii. it terminates the course, for any reason, prior to the course commencement date.
iii. it fails, for any reason, to complete the course by the course completion date.
iv. it terminates the course, for any reason, prior to course completion date.
Kaplan Higher Education Institute shall, within 7 working days of notifying the student in writing of above
circumstances (i) to (iv), provide the student with information and details of the alternative confirmed course
arrangement to allow the student to make timely and appropriate decision on the alternative arrangement. Kaplan
Higher Education Institute offers a 7-day cooling off period to students who wish to withdraw after signing their
student contract. Students will receive the maximum refund of the course fees if they withdraw within 7 days of
signing the student contract. All withdrawal requests must be presented to Kaplan Higher Education Institute
officially in writing.
30% Before, but not less than 30 days before the course commencement
date
0% On or after the course commencement date
In the event that a student wishes to withdraw from the program, the application fee and Kaplan Access Card fee
are not refundable. Students are liable to pay (where applicable) fees that are imposed by the government
authorities or other external partners.
NOTE: Information herewith has been updated and is accurate as of 12 January 2011
Kaplan City Campus @ Wilkie Edge, 8 Wilkie Road, #02-01, Wilkie Edge, Singapore 228095
Tel: (65) 6733 1877 Fax: (65) 6733 2977
BRN: 198600044N www.kaplan.com.sg
Please refer to CPE website (www.cpe.gov.sg) for details on EduTrust, Fee Protection Scheme and Standard PEI-
student Contract
NOTE: Information herewith has been updated and is accurate as of 12 January 2011
Kaplan City Campus @ Wilkie Edge, 8 Wilkie Road, #02-01, Wilkie Edge, Singapore 228095
Tel: (65) 6733 1877 Fax: (65) 6733 2977
BRN: 198600044N www.kaplan.com.sg