Académique Documents
Professionnel Documents
Culture Documents
Motion Manager
Title Initial Startup Software for:
CLM, ELC, CR*, FL*
Type of Documentation
Document Typecode
Purpose of Documentation • This documentation supplements the Initial Startup Instructions for
MotionManager
Validity The specified data is for product description purposes only and may not
be deemed to be guaranteed unless expressly confirmed in the contract.
All rights are reserved with respect to the content of this documentation
and the availability of the product.
Table of Contents
1 General Information 1-1
1.1 Release Notes................................................................................................................................ 1-1
1.2 Installation Notes............................................................................................................................ 1-1
2 Release 06 2-1
2.1 Corrected Problems: ...................................................................................................................... 2-1
V06-F01 Repeated "clicking" on "Receive Data" leads to wrong Parameter selection ........... 2-1
V06-F02 Data error in instruction while transferring NC instructions when the input is "123". 2-1
V06-F03 CLM-LAP3 error in the parameter database............................................................. 2-1
2.2 New Functionality:.......................................................................................................................... 2-1
V06-E01 The following controls are now supported: ............................................................... 2-1
V06-E02 Dialog Editor CRP..................................................................................................... 2-1
V06-E03 Converter .................................................................................................................. 2-1
3 Release 08 3-1
3.1 Corrected Problems: ...................................................................................................................... 3-1
V08F01 CLM-LAP3 in Single Axis Mode, Parameters above Ax33 could not be entered ...... 3-1
V08F02 In the Logic Task Editor, a note is sometimes capitalized when it appears after
"RETURN."............................................................................................................................... 3-1
V08F03 ELC, FLP, CR* Address 98 in the control is accepted as a valid address, although
the max. station number is 36.................................................................................................. 3-1
V08F04 After "Cancel" during "Send Parameter,", send cannot be executed again. It is also
impossible to exit the dialog!.................................................................................................... 3-1
V08F05 Clear or delete lines in the label table sometimes not functional............................... 3-1
V08F06 Scrolling in the label table sometimes causes the program to crash......................... 3-1
V08F07 A space before a variable in the label table causes a compiler error ........................ 3-1
V08F08 Operational sign before a variable in the label table is not evaluated ....................... 3-1
V08F09 CLM – Parameter transfer to CLM not functional with BTV switched between PC and
CLM.......................................................................................................................................... 3-2
V08F10 CLM Display and remove program errorswith „F4“ and „F5“ ..................................... 3-2
5 Index 5-1
MotionManager General Information 1-1
1 General Information
Software-Release SWD-MOMANT-INB-03VRS
MotionManager Release 06 2-1
2 Release 06
V06-E03 Converter
NC programs, parameters and variables that have been written using
MotionManagerPC (DOS program) can be converted to
MotionManagerNT format.
Additional information is available in the MOMANT-03VRS Functional
Description.
Software-Release SWD-MOMANT-INB-03VRS
MotionManager Release 08 3-1
3 Release 08
V08F05 Clear or delete lines in the label table sometimes not functional
Corrected!
Software-Release SWD-MOMANT-INB-03VRS
3-2 Release 08 MotionManager
V08F10 CLM Display and remove program errorswith „F4“ and „F5“
Software-Release SWD-MOMANT-INB-03VRS
MotionManager Release 10: 4-1
4 Release 10:
Software-Release SWD-MOMANT-INB-03VRS
MotionManager Index 5-1
5 Index
A
Address 98 3-1
Ax33 3-1
B
BTV between PC and CLM 3-2
C
Cancel during SendParameter 3-1
Clear or delete lines in label table 3-1
CLM1.4LM1-01VRS 2-1
Converter 2-1
Converter for CLM-LM1 4-1
D
Dialog Editor 2-1
E
ECODR3-CR*-01VRS 2-1
Error in the parameter database 2-1
F
France as basic text 4-1
I
Installation 1-1
L
Logic Task Editor 3-1
N
No transferring from instructions with Jump Labels 4-1
Note 3-1
O
Operational sign before variable in label table 3-1
S
Scrolling in the label table 3-1
Single Axis Mode 3-1
Space before variable in the lable table 3-1
U
Uninstall 1-1
W
Wrong parameter selection 2-1
Software-Release SWD-MOMANT-INB-03VRS
5-2 Index MotionManager
Software-Release SWD-MOMANT-INB-03VRS