Vous êtes sur la page 1sur 12

ENERGY METERS

Electronic Energy Meter Page Trivector Meter - ER300P Page

Technical Data 13/2 Technical Data 13/3

Ordering Information 13/7 Product Highlights 13/5

Overall Dimensions 13/9 Ordering Information 13/8

Overall Dimensions 13/10

Power Navigator-ER300N Page

Technical Data 13/4

Product Highlights 13/6


13
Overall Dimensions 13/11
SALIENT FEATURES

ELECTRONIC ENERGY METER

✦ Current Reversal Indication

✦ LED indication proportional to kWh for on-spot calibration

✦ Six Digit counter

✦ Dust Proof body, rugged construction,elegant polycarbonate casing

✦ No mechanical wear and tear

✦ Not affected by mounting position

✦ Not affected by external magnetic field

✦ Consistent accuracy

✦ Earth load tamper indication in single phase energymeter

✦ “Voltage ON” indication per phase in base mounting three phase energymeters

✦ Three phase energymeters work even on neutral removal

TRIVECTOR METER - ER300P

✦ 0.2s / 0.5s / 1.0 Class accuracy

✦ Multi Tariff Capability with programmable TOD

✦ 3 Programmable Maximum demand (MD) registers

✦ Tamper / failure detection and record capability

✦ Communication interface via Optical port conforming to IEC 1107 protocol

✦ Configurable Load survey recorders

✦ Back lit LCD display

✦ 3 Display modes for easy data access

✦ Support of Phasor viewing on MRI

✦ Battery back-up for Data collection

✦ Periodic self diagnostic checks

ENERGY MANAGEMENT SYSTEM, POWER NAVIGATOR-ER300N

✦ 0.5S / 1.0 class accuracy

✦ 3 Programmable Maximum demand (MD) registers

✦ 3 Display modes for easy data access


13
✦ User friendly software for PC operation

✦ Communication interface via RS485 port and MODBUS protocol

✦ Back lit LCD display

✦ Easy front panel programming

✦ Periodic self diagnostic checks

13/1
TECHNICAL DATA
ELECTRONIC ENERGY METER

Type Single Phase Three Phase

Model No. EM101B EM201B/EM201F


EM301B/EM301F

Accuracy Class 1.0 as per IS 13779 Class 1.0 as per IS 13779

Voltage rating 240V 110V - 3 Phase 3 Wire


240V - 3 Phase 4 Wire

Current Rating (lb) 2.5A / 5A / 10A / 20A 1-2A / 5-10A

Frequency 50Hz + 10% 50Hz + 10%

Overload Capacity 400% of lb 200% of lb

Starting Current 0.4% of lb 0.4% of lb

Display Six digit counter Six digit counter

Weight 1 kg 2.5 kg

Mounting Base Base / Flush

Operating 0°C to 55°C 0°C to 55°C


Temperature (As per IS13779) (As per IS1379)

13

13/2
TECHNICAL DATA
TRIVECTOR METER - ER300P

Accuracy Class 1.0 - IEC 1036 / IS 13779


Class 0.5S / 0.2S - IEC 687 / CBIP 88

Voltage (Vn) 3Ph 4W - 415V AC (-40% to +20%)


110V AC (-40% to +20%)
3 Ph 3W - 110V AC (-40% to +20%)

Current (In) 5A or 1A (to 200%)

Starting current 0.2% In (Class 1.0)


0.1% In (Class 0.5S / 0.2S)

Power Factor 4 quadrant operation

Frequency 50 Hz +10%

Load characteristics < 5VA in potential circuit


< 0.5VA in current circuit

Field configurable features Meter configuration - Uni or Bi-directional


Method of kvah calculation - Lead as lead - or lead as UPF
External CT / PT ratios
MD settings - max. 3 out of 8 parameters
TOD settings
Reset modes - Manual, Auto monthly, Auto daily, Auto monthly and manual
Load survey settings - No. of days and parameters
Real Time Clock setting
3 Display modes Mode 1 / 2 / 3

Electromagnetic compatibility IEC 1036 / IS 13779 (Class 1.0)


IEC 687 / CBIP-88 (Class 0.5S / 0.2S)

Case material Plastic moulded with transparent cover


Protected to-
IP51 - IEC 1036 / IS 13779 (Class 1.0)
IP51 - IEC 687 / CBIP-88 (Class 0.5S / 02S)

Insulation properties & IEC 1036 / IS 13779 (Class 1.0) 13


HV insulation resistance IEC 687 / CBIP-88 (Class 0.5S / 0.2S)
temperature -5°C to 60°C for operation
-20°C to 70°C for storage

Humidity 95% RH Condensing

Dimension 320L x 175W x 110H

Weight < 2.5 Kgs

13/3
TECHNICAL DATA
POWER NAVIGATOR - ER300N

Accuracy Class 1.0 - IEC 1036 / IS 13779


Class 0.5S / 0.2S - IEC 687 / CBIP 88

Voltage (Vn) 3Ph 4W - 415V AC (-40% to +20%)


110V AC (-40% to +20%)
3 Ph 3W - 110V AC (-40% to +20%)

Current (In) 5A or 1A (to 200%)

Starting current 0.2% In (Class 1.0)


0.1% In (Class 0.5S / 0.2S)

Power Factor 4 quadrant operation

Frequency 50 Hz +10%

Load characteristics < 5VA in potential circuit


< 0.5VA in current circuit

Field configurable features Meter configuration - Uni or Bi-directional


Method of kvah calculation - Lead as lead - or lead as UPF
External CT / PT ratios
MD settings - max. 3 out of 8 parameters
Reset modes - Manual, Auto monthly, Auto daily, Auto monthly and manual
Real Time Clock setting
3 Display modes Mode 1 / 2 / 3

Electromagnetic compatibility IEC 1036 / IS 13779 (Class 1.0)


IEC 687 / CBIP-88 (Class 0.5S / 0.2S)

Case material Plastic moulded with transparent cover


Protected to-
IP51 - IEC 1036 / IS 13779 (Class 1.0)
IP51 - IEC 687 / CBIP-88 (Class 0.5S / 02S)

Insulation properties & IEC 1036 / IS 13779 (Class 1.0)


HV insulation resistance IEC 687 / CBIP-88 (Class 0.5S / 0.2S)
13 temperature -5°C to 60°C for operation
-20°C to 70°C for storage

Humidity 95% RH Condensing

Dimension Front bezel 158 x 136 mm


Cutout 142 x 113 mm
Depth 204 mm

Weight < 2.5 Kgs

13/4
PRODUCT HIGHLIGHTS
TRIVECTOR METER

DISPLAY PARAMETERS
Meter can be programmed to display maximum 350 parameters that include PF, per phase RMS voltages and currents, Frequency,
phase sequence, real time clock, kW, kVA, kVASr, kWH, kVAh,kVArh+, kVArh-, MDs’, Rising demand with energies, temper details, etc.

DISPLAY MODES
Three display modes Mode 1, Mode 2 and Mode 3 are available.

KVAh / MD kVA CALCULATION METHODS


Method of kVAh/MD kVA calculation can be configured for lead to be treated as up for lead to be treated as lead itself.

BILLING REGISTERS
8 billing registers are available for recording 8 type of energies- kWH, kVAh, kVArh+,kVArh- (both forward/reverse). The last 12 reading
of all reset energies can be accessed for record/ analysis. Average PF for each reset is available.

MAXIMUM DEMAND (MD) REGISTERS


3 MDs out of 8 energy types can be selected and programmed for separate integration period ranging from 1 minute to 60 minutes. MD1
can be configured for Block / sliding window method. Reset MD (12 reading) and cumulative MD are also available.

LOAD SURVEY RECORDERS


Registers for load survey data record upto 4 energy parameters. The integration period and number of days are programmable.

TAMPER / FAILURE RECORDING


Meter detects and records various tamper / failure conditions such as voltage failure, current failure, voltage unbalance, current unbalance,
current bypass, current reversal and power failure. For above conditions, Tamper count, Duration, Occurrence date / time and Present
status is recorded by Sequence storage method.

CONTROL KEYS
Two control keys are located on the font panel of the meter for manual scrolling mode, various display parameters can be display using
the same.
Manual reset can be performed from key on front panel.

RESET
meter can be configured for one of the reset modes such as Manual reset, Auto monthly reset, Auto daily reset, Auto monthly & manual
reset. 12 reset backups are provided.

TIME-OF-DAY(TOD)
The meter offers a flexible tariff structure. During different times of the day for different seasons, different tariff structure can be programmed.
A real time clock with a lithium battery has a built-in 100 years calendar. It is used for time keeping. A day can be divided into 10 defined
slots (11 undefined slots). Upto 8 tariffs registers programmable. Supports upto 4 profiles, 4 seasons and 4 special day.

LED PULSE OUTPUT


ER300P incorporates two LEDs on the front panel of the meter for accuracy check of kWh and kVArh.

BATTERY OPERATION
A Push button on the front panel enables data collection, viewing data on LCD and resetting data during power failure.

COMMUNICATION INTERFACE
ER300P incorporates an infra-red optical port interface on the front panel as per IEC 1107 standard. An optical magnetic head interfaces
between the meter optical port and a standard RS232C port on the PC/MRI side.
13

13/5
PRODUCT HIGHLIGHTS
POWER NAVIGATOR

DISPLAY PARAMETERS
Meter can be programmed to display maximum 55 parameters that include PF, per phase RMS voltages and currents, Frequency,
phase sequence, kW, kVA, kVAr, kWH, kVAH, kVArh+, kVArh-, Mda’, Rising demand with elapsed time, high resolution energies,
etc..

DISPLAY MODES
Three display modes - Mode 1, Mode 2 and Mode 3 are available.

BILLING REGISTERS
8 Billing registers are available for recording 8 type of energies - kWH, kVAh, kVArh+, kVArh- (both forward / reverse). The last
4 reading of all reset energies can be accessed for record / analysis.

MAXIMUM DEMAND (MD) REGISTERS


3 MDs out of 8 energy types can be selected and programmed for separate integration period changing from 1 minute to 60
minutes. All MDs can be configured for Block / Sliding window method. Reset MD (4 readings) and cumulative MD are also
available.

CONTROL KEYS
4 control keys and one recessed key are located on the front panel of the meter. in manual scrolling mode, various display
parameters can be displayed using the up and down keys. Using all keys, meter can be easily programmed (password protected).

RESET
Meter can be configured for one of the rest modes such as Manual reset, Auto monthly reset, Auto daily reset. 4 reset backups
are provided.

LED PULSE OUTPUT


POWER NAVIGATOR incorporates two LEDs on the front panel of the meter for accuracy check of kWh and kVArh.

COMMUNICATION INTERFACE
POWER NAVIGATOR incorporates RS485 port at the back. The MODBUS protocol helps user to design his own software to
integrate these meters with his existing network using same protocol. A detail memory map for the meter is included in the
operating manual. Also, a user friendly demo software ‘Navigator’ can be provided. This software designed at Mysore works,
enables user to access on-line information from various Power Navigators on central computer using RS485-232 converter.

13

13/6
ORDERING INFORMATION
ELECTRONIC ENERGY METER

Model Description Catalogue No.

EM101B 1PH, kWh Meter 240V, 5-20A, Base Mounting WM101BC4D00

EM101B 1PH, kWh Meter 240V, 10-40A, Base Mounting WM101BC6D00

EM101B 1PH, kWh Meter with ELT 240V, 5-20A,Base Mounting WM101BC4D01

EM101B 1PH, kWh Meter with ELT 240V, 2.5-10A, Base Mounting WM101BC2D01

EM101B 1PH, kWh Meter withELT240V, 10-40A,Base Mounting WM101BC6D01

EM101B 1PH, kWh Dir, Base Mounting, 240V, 20-80A WM101BC7D00

EM201B 3PH, 3W, kWh, CT Op, Base Mounting, 110V, 5-10A WM201BB3C00

EM201B 3PH, 3W, kWh, CT Op, Base Mounting, 110V, 1-2A WM201BB1C00

EM201F 3PH, 3W, kWh, CT Op, Flush Mounting, 110V, 5-10A WM201FB3C00

EM201F 3PH, 3W, kWh, CT Op, Flush Mounting, 415V, 5-10A WM201FD3C00

EM201F 3PH, 3W, kWh, CT Op, Flush Mounting, 110V, 1-2A WM201FB1C00

EM201F 3PH, 3W, kWh, CT Op, Flush Mounting, 415V, 1-2A WM201FD1C00

EM301F 3PH, 4W, kWh, CT Op, Flush Mounting, 240V, 5-10A WM301FC3C00

EM301F 3PH, 4W, kWh, CT Op, Flush Mounting, 240V, 1-2A WM301FC1C00

EM301F 3PH, 4W, kWh, CT Op, Flush Mounting, 63.5V, 5-10A WM301FA3C00

EM301F 3PH, 4W, kWh, CT Op, Flush Mounting, 63.5V, 1-2A WM301FA1C00

EM301B 3PH, 4W, kWh, CT Op, Base Mounting, 240V, 5-10A WM301BC3C00

EM301B 3PH, 4W, kWh, CT Op, Base Mounting, 240V, 1-2A WM301BC1C00

EM301B 3PH, 4W, kWh, Dir, Base Mounting, 240V, 5-20A WM301BC4C00

EM301B 3PH, 4W, kWh, Dir, Base Mounting, 240V, 1-40A WM301BC6D10

EM301B 3PH, 4W, kWh, Dir, Base Mounting, 240V, 50-100A WM301BC8D10

13

13/7
ORDERING INFORMATION
TRIVECTOR METER

Model Description Catalogue No.

ER300P 3 PH 3W TVM 110V(L-L) 1A CL0.5S BM WR200BB1200

ER300P 3 PH 3W TVM 110V(L-L) 5A CL0.5S BM WR200BB5200

ER300P 3 PH 3W TVM 110V(L-L) 1A CL1 BM WR200BB1300

ER300P 3 PH 3W TVM 110V(L-L) 5A CL1 BM WR200BB5300

ER300P 3 PH 4W TVM 110V(L-L) 1A CL0.5S BM WR300BB1200

ER300P 3 PH 4W TVM 110V(L-L) 5A CL0.5S BM WR300BB5200

ER300P 3 PH 4W TVM 110V(L-L) 1A CL1 BM WR300BB1300

ER300P 3 PH 4W TVM 110V(L-L) 5A CL1 BM WR300BB5300

ER300P 3 PH 4W TVM 240V(L-N) 1A CL0.5S BM WR300BC1200

ER300P 3 PH 4W TVM 240V(L-N) 5A CL0.5S BM WR300BC5200

ER300P 3 PH 4W TVM 240V(L-N) 1A CL1 BM WR300BC1300

ER300P 3 PH 4W TVM 240V(L-N) 5A CL1 BM WR300BC5300

ER300P 3 PH 3W TVM 110V 5A CL0.5S (KEB1) BM WR200BB52K1

ER300P 3 PH 3W TVM 110V 5A CL0.5S (KEB2) BM WR200BB52K2

ER300P 3 PH 3W TVM 110V 5A CL0.5S (KSEB1) BM WR200BB52L1

ER300N 3 PH 3W TVM 110V(L-L) 1A CL1 FM WR200FB1300

ER300N 3 PH 3W TVM 110V(L-L) 5A CL1 FM WR200FB5300

ER300N 3 PH 4W TVM 110V(L-L) 1A CL1 FM WR300FB1300

ER300N 3 PH 4W TVM 110V(L-L) 5A CL1 FM WR300FB5300

ER300N 3 PH 4W TVM 240V(L-N) 1A CL1 FM WR300FC1300

ER300N 3 PH 4W TVM 240V(L-N) 5A CL1 FM WR300FC5300

ER300N 3 PH 3W TVM 110V(L-L) 1A CL0.5S FM WR200FB1200

ER300N 3 PH 3W TVM 110V(L-L) 5A CL0.5S FM WR200FB5200

ER300N 3 PH 4W TVM 110V(L-L) 1A CL0.5S FM WR300FB1200

13 ER300N 3 PH 4W TVM 110V(L-L) 5A CL0.5S FM WR300FB5200

ER300N 3 PH 4W TVM 240V(L-N) 1A CL0.5S FM WR300FC1200

ER300N 3 PH 4W TVM 240V(L-N) 5A CL0.5S FM WR300FC5200

13/8
OVERALL DIMENSIONS
ELECTRONIC ENERGY METER

SINGLE PHASE ENERGY METER - EM101

METER MOUNTING DETAILS

THREE PHASE ENERGY METER - EM201/301 B/F

PANEL MOUNTING DETAILS

BASE MOUNTING

PANEL CUTOUT DIMENSIONS : 150MM X 222MM

13

FLUSH MOUNTING

Note: All dimensions are in mm.


13/9
OVERALL DIMENSIONS
TRIVECTOR METER - ER300P

PANEL MOUNTING DETAILS

BASE MOUNTING

Note: All dimensions are in mm.

13

13/10
OVERALL DIMENSIONS
POWER NAVIGATOR - ER300N

PANEL DRILLING 113x142 (LxH)

13

Note: All dimensions are in mm.


13/11

Vous aimerez peut-être aussi