Académique Documents
Professionnel Documents
Culture Documents
0 Net4home
Product manual
Appliance control Series-- RF-IR Control adapter product manual VER: 1.0 Net4home
The appliance control series of RF-IR Convertor can control the infrared home appliance, such as TV,
Air-condition, DVD etc.
Indicator
1
Appliance control Series-- RF-IR Control adapter product manual VER: 1.0 Net4home
Pls recoding the device ID numbers (see the rear code label) before install the WIT130, in order to
access network later.
Make use of the recommended power adapter (5V 2A) of WIT130.The green LED indicator will
flash for 5 times when the power on. If the indicator light is inoperative, then should activate the
RF-IR control adapter. The green LED will flash for 5 times after activate. It indicates device has
successfully joined in the network.
Activation method: Press the activate button when power on. When see the green LED flash 5 times,
it activate successful.
First the new product joined into the network when finished installation. Before access to the
network, pls note that the intelligent gateway be on the normal operation condition. The specific
steps as follow:
【Specific operations, pls see the instruction of smart home system management platform】
2
Appliance control Series-- RF-IR Control adapter product manual VER: 1.0 Net4home
After device add successful, meanwhile sure the power on. Open the “enable network” function.
【Specific operations, pls see the instruction of smart home system management platform】
Step 3 the green LED indicator flash, it indicates device has successfully joined in the network.
After Open the “Enable network”, the green LED indicator of WIT130 will flash 5 times, and then
put out. It means joined on the network successful.
Remark: 【 if the WIT130 has joined in the network already. Or else need to back off the network first, then
joined in the network again. Specific instruction, please see “Restore factory default “in this specification】
Click the key “Study” in the relevant infrared appliance of management platform, when popup
relevant windows, choice the studying key. While the red LED indicator of WIT130 lightens, it
indicates that the device is in the learning condition. Take the 38k infrared remote control is directed
at optical lens of WIT130.Click the key “study”, when the red LED put out, means study end.
(Testing the study whether is correct or not: click the key “study” on the management platform.
When the WIT130 optical lens of the red LED flash once. If the infrared appliance makes with the
relevant operation, means study successful. If not, indicate unsuccessful, should study again.
Click the key “study” on the management platform, when the WIT130 optical lens of red LED flash
once, the infrared appliance makes with the relevant operation
If the WIT130 has joined in the network already; first need to back off the network, then joined in
the network again. Operational method as follow:
3
Appliance control Series-- RF-IR Control adapter product manual VER: 1.0 Net4home
Reset key
Method 1: When WIT130 is power on, Press the “Reset key” at the rear’ ostiole of WIT130. The
green LED flash 20 times means that back off the network successful.
Method 2: when WIT130 isn’t power on, Press the “Reset key” at the rear’ ostiole of WIT130, then
make it power on, the green LED flash 20 times, it indicates back off the network successful.
Operating Humidity:30-90%
Frequency:2.4GHZ
Sensitivity:-95dB